• Korean Journal of Environmental Biology
• /
• v.29 no.3
• /
• pp.162-170
• /
• 2011

In order to assess the inorganic and organic pollutents characteristics in marine water, we investigated COD (Chemical Oxygen Demand), Chlorophyll a and Escherichia coli during four seasons at 20 stations of Gwangyang Bay and at 23 stations of Jinhae Bay, Korea. The bay is divided into three zones in Gwangyang and four zones in Jinhae respectively, based on the pollutent levels. In Gwangyang Bay, the high concentration (mean 4.7 mg $L^{-1)$) of COD was recorded during spring season at Zone I, which can be characterized as a semi-enclosed eutrophic area (St. 1~9). Also, Chl. a concentrations were high at Zone I (mean 14.0 ${\mu}g\;L^{-1}$). The colony of E. coli were detected during summer season at Zone II, which is influenced by Seomjin River water. The E. coli may have been entered from the river water in a large pulse during rainy season. On the other hand, E. coli was kept low levels during four seasons at the Zone III, which is influenced indirectly by surface water currents from offshore of the bay. In Jinhae Bay, the high COD and Chl. a were shown during all seasons at Zone I, which is characteristed by semi-enclosed eutrophic area of Masan and Haengam bays. The Zone I also had been shown relatively high E. coli concentration in all seasons. In constrast, other three zones did not show seasonal characteristics of the E. coli concentrations. The present study suggests that E. coli concentrations can be significantly elevated in eutrophic semi-enclosed area.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.341-348
• /
• 2013

Maintenance of adequate soil tension or content during the period of crop growth is necessary to support optimum plant growth and yields. A better understanding of soil tension and content for precision irrigation would allow optimal soil water condition to crops and minimize the adverse effects of water stress on crop growth and development. This research reports on a comparison of soil water tension and content variations in differently textured soils over time under drip irrigation using two different water management methods, i.e. pulse time and required water irrigation methods. The pulse time-based irrigation was performed by turning the solenoid valve on and off for preset times to allow the wetting front to disperse in root zone before additional water was applied. The required water estimation method was a new water control logic designed by Rural Development Administration that applies the amount of water required based on a conversion of the measured water tension into water content. The use of the pulse time irrigation method under drip irrigation at a high tension of -20 kPa and high temperatures over $30^{\circ}C$ was not successful at maintaining moisture tensions within an appropriate range of 5 kPa because the preset irrigation times used for water control could not compensate for the change in evapotranspiration during day and night. The response time and pattern of water contents for all of the tested soils measured with capacitance-based sensor probes were faster and more direct than those of water tensions measured with porous and ceramic cup-based tensiometers when water was applied, indicating water content would be a better control variable for automatic irrigation. The required water estimation-based irrigation method provided relatively stable control of moisture tension, even though somewhat lower tension values were obtained as compared to the target tension of -20 kPa, indicating that growers could expect to be effective in controlling low tensions ranging from -10 to -20 kPa with the required water estimation system.

• IMMUNE NETWORK
• /
• v.3 no.1
• /
• pp.1-7
• /
• 2003

Type II collagen (CII), major component of hyaline cartilage, has been considered as an auto-antigen in rheumatoid arthritis (RA). However, the clinical and biological significances with regard to the CII autoimmunity need to be clarified in human RA. The presence of antibodies to CII has been identified in sera, synovial fluid, and cartilage of patients with RA. In our study, the increased titer of IgG anti-CII in sera was well correlated with C-reactive protein, suggesting that this antibody may reflect the inflammatory status of RA. The titer of anti-CII antibodies (anti-CII Abs) tended to be higher in early stages of diseases. In our extending study, among 997 patients with RA, 269 (27.0%) were positive for circulatory IgG antibody to CII, those levels were fluctuated over time. It is hard to assess the significant amount of T cell responses to CII and CII (255~274) in RA. By using a sensitive method of antigen specific mixed lymphocyte culture, we can detect the presence of CII-reactive T cells in peripheral blood mononuclear cells of RA patients. Sixty seven (46.9%) of 143 patients showed positive CII reactive T cell responses to CII or CII (255~274). The frequencies of CII reactive T cells were more prominent in inflamed synovial fluid (SF) than in peripheral blood. These T cells could be clonally expanded after consecutive stimulation of CII with feeding of autologous irradiated antigen presenting cells (APC). Moreover, the production of Th1-related cytokine, such as IFN-${\gamma}$, was strongly up-regulated by CII reactive T cells. These data suggest that T cells responding to CII, which are probably presenting the IFN-${\gamma}$ producing cells, may play an important role in the perpetuation of inflammatory process in RA. To evaluate the effector function of CII reactive T cells, we investigated the effect of CII reactive T cells and fibroblasts-like synoviocytes (FLS) interaction on the production of pro-inflammatory cytokines. When the CII reactive T cells were co-cultured with FLS, the production of IL-15 and TNF-${\alpha}$ from FLS were significantly increased (2 to 3 fold increase) and this increase was clearly presented in accord to the expansion of CII reactive T cells. In addition, the production of IFN-${\gamma}$ and IL-17, T cell derived cytokines, were also increased by the co-incubation of CII reactive T cells with FLS. We also examined the impact of CII reactive T cells on chemokines production. When FLS were co-cultured with CII stimulated T cells, the production of IL-8, MCP-1, and MIP-1${\alpha}$ were significantly enhanced. The increased production of these chemokines was strongly correlated with increase the frequency of CII reactive T cells. Conclusively, immune response to CII was frequently found in RA. Activated T cells in response to CII contributed to increase the production of proinflammatory cytokines and chemokines, which were critical for inflammatory responses in RA. The interaction of CII-reactive T cells with FLS further augmented this phenomenon. Taken together, our recent studies have suggested that autoimmunity to CII could play a crucial role not only in the initiation but amplification/perpetuation of inflammatory process in human RA.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.169-181
• /
• 2007

Statement of problem: Titanium is well known as a proper metal for the dental restorations, because it has an excellent biocompatibility, resistance to corrosion, and mechanical property. However, adhesion between titanium and dental porcelains is related to the diffusion of oxygen to the reaction layers formed on cast-titanium surfaces during porcelain firing and those oxidized layers make the adhesion difficult to be formed. Many studies using mechanical, chemical and physical methods to enhance the titanium-ceramic adhesion have been actively performed. Purpose: This study meant to comparatively analyse the adhesion characteristics depending on different titanium surface coatings after coating the casts and wrought titanium surfaces with Au and TiN. Material and method: In this study, the titanium specimens (CP-Ti, Grade 2, Kobe still Co. Japan) were categorized into cast and wrought titanium. The wrought titanium was cast by using the MgO-based investment(Selevest CB, Selec). The cast and wrought titanium were treated with Au coating($ParaOne^{(R)}$., Gold Ion Sputter, Model PS-1200) and TiN coating(ATEC system, Korea) and the ultra low fusing dental porcelain was fused and fired onto the samples. Biaxial flection test was done on the fired samples and the porcelain was separated. The adhesion characteristics of porcelain and titanium after firing and the specimen surfaces before and after the porcelain fracture test were observed with SEM. The atomic percent of Si on all sample surfaces was comparatively analysed by EDS. In addition, the constituents of specimen surface layers after the porcelain fracture and the formed compound were evaluated by X-ray diffraction diagnosis. Result: The results of this study were obtained as follows : 1. The surface characteristics of cast and wrought titanium after surface treatment(Au, TiN, $Al_2O_3$ sandblasting) were similar and each cast and wrought titanium showed similar bonding characteristics. 2. Before and after the biaxial flection test, the highest atomic weight change of Si component was found in $Al_2O_3$ sandblasted wrought titanium(28.6at.% $\rightarrow$ 8.3at.%). On the other hand, the least change was seen in Au-Pd-In alloy(24.5at.% $\rightarrow$ 9.1at.%). 3. Much amount of Si components was uniformly distributed in Au and TiN coated titanium, but less amount of Si's was unevenly dispersed on Al2O3 sandblasting surfaces. 4. In X-ray diffraction diagnosis after porcelain debonding, we could see $Au_2Ti$ compound and TiN coating layers on Au and TiN coated surfaces and $TiO_2$, typical oxide of titanium, on all titanium surfaces. 5. Debonding of porcelain on cast and wrought titanium surface after the biaxial flection is considered as a result of adhesion deterioration between coating layers and titanium surfaces. We found that there are both adhesive failure and cohesive failure at the same time. Conclusion: These results showed that the titanium-ceramic adhesion could be improved by coating cast and wrought titanium surfaces with Au and TiN when making porcelain fused to metal crowns. In order to use porcelain fused to titanium clinically, it is considered that coating technique to enhance the bonding strength between coating kKlayers and titanium surfaces should be developed first.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.6
• /
• pp.813-819
• /
• 2010

The intracellular lipid droplets were stained with Oil Red O dye and quantified. Compared to the control, lipid accumulation was significantly decreased by 19.4% with the treatment of LCM at the concentration of $1000\;{\mu}g$/mL. Intracellular triglyceride (TG) level was also reduced by 21% at the concentration of $1000\;{\mu}g$/mL. To determine the mechanism for the reduction in TG content, levels of glucose uptake and glycerol release were measured. Incubation of the 3T3-L1 adipocytes with LCM did not affect the cellular uptake of glucose. However, the level of free glycerol released into the cultured medium drastically increased by 24.3% with the treatment of LCM. In subsequent measurements using quantitative real-time PCR, mRNA levels of hormone-sensitive lipase (HSL) and adipose triglyceride lipase (ATGL) except lipoprotein lipase (LPL) were significantly elevated at higher concentration. These results suggest that LCM partially stimulates the lipolysis through the induction of HSL and/or ATGL gene expression, resulting in the reduced lipid accumulation and increased glycerol release.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.990-998
• /
• 2012

This study investigated the effects of the diet with Cucurbita moschata (CM), adlay seed (AS), and Cudrania tricuspidata leaf (CTL) mixed-powder on the visceral fat, fecal amount, and serum lipid profiles in rats fed a high-fat diet (HFD). The mixed ratio of CM, AS, and CTL as a functional food ingredient was 1:1:1 on a weight basis. Male Sprague-Dawley rats were fed a high-fat diet (D12492; 45 kcal fat) for 5 weeks during the first phase. In the second phase, which lasted 5 weeks, the rats were divided into six experimental groups. The groups were: a high-fat diet group as a control during the 10 weeks of experimental period; and a high-fat diet with 5, 10, 15, 20, and 30% mixed-powder supplement group. The adipose tissue (RFP, EFP) weights were significantly decreased in the 20% and 30% mixed-powder supplement groups than in the HFD group (p<0.05). The fecal weight produced by the 15%, 20%, and 30% mixed-powder supplement groups was significantly increased during the second phase compared to the first phase (p<0.05). In terms of serum lipids, TG (triglyceride) content was decreased in the 10% and 15% mixed-powder supplement groups. The blood glucose levels were significantly decreased in all experimental diet supplement groups than in the HFD group (p<0.05). The findings show that the high supplement groups could improve the visceral fat accumulation, fecal amount, and blood glucose content compared to the HFD group.

• Korean Journal of Poultry Science
• /
• v.37 no.4
• /
• pp.347-354
• /
• 2010

The current work was carried out to investigate the effect of crossbred Korean native chickens (KNC) on performance and carcass ratio. Seven hundred twenty 1-d-old chicks were divided into groups by strain (A, B, C and D) and sex (male and female). Strains were A) (KNC egg-meat type C strains $\times$ KNC meat type S strains) $\times$ KNC meat type H strains, B) (KNC egg-meat type C strains $\times$ KNC meat type H strains) $\times$ KNC meat type S strains, C) (KNC native R strains $\times$ KNC meat type S strains) $\times$ KNC meat type H strains and D) (KNC native L strains $\times$ KNC meat type H strains $\times$ Ross broiler. Experimental diets consisted of 3 phases such as starter(0~5 weeks; CP 20.0%, ME 3,050 kcal/kg), earlier (5~8 weeks; CP 18.0%, ME 3,100 kcal/kg) and finisher (8~12 weeks; CP 16.0%, ME 3,150 kcal/kg). Body weight (BW) and feed intake (FI) was measured every week and carcass ratio(CR) was calculated at 5 and 10 week after starting experiment. There was no difference in BW among strains until 5 weeks (P>0.05), however D strain resulted in a higher BW after 5 weeks (P<0.05). Body weight gain (BWG) and FI in D strain were also significant higher compared to the other strains for all periods. However, D strains showed the lowest (P<0.05) fee conversion ratio (FCR). The other strains except D showed a similar BW, BWG, FI and FCR among strains. In addition, there were no differences in carcass weight (CW) and carcass ratio (CR) among strains at 5 weeks, however D strain showed higher CW and CR at 10 weeks. These results suggested the basic data that needed to develope the new strains.

• Korean Journal of Poultry Science
• /
• v.37 no.3
• /
• pp.229-235
• /
• 2010

This work was carried out to improve the performance and the carcass yield of Korea native duck (KND) according to crossbreeding KND and broiler duck (BD). Two hundred forty out of crossbred ducks were divided into 4 strains and selected as 120 ducks separated by sex, respectively. Crossbred ducks were native ducks (female)${\times}$native ducks (male), native ducks (female)${\times}$broiler ducks (male), broiler ducks (female)${\times}$native ducks (male), and broiler ducks (female)${\times}$broiler ducks(male) as A, B, C and D, respectively. Broiler duck diet was fed as experimental diet for 0~3 weeks (CP 22.0%, ME 2,900 kcal/kg) and 3~8 weeks (CP 18.0%, ME 3,000 kcal/kg). Body weight of male was high compared to female, and that of B and C was high compared to A and low compared to D at 3 and 8 week (P<0.05). Body weight gain of male was high compared to female at 3~8 weeks and 0~8 weeks, and it was shown as D>C>B>A on body weight gain (P<0.05). In case of feed intake, there was no difference between male and female, and B and C were high compared to A and low compared to D (P<0.05). Male feed requirement was high at 3~8 weeks, and there was significant difference between A and B, C and between B and D. Carcass yield of 4 strains was shown as 70.1%, 70.8%, 73.1% and 71.2%, respectively. Finally, Crossbreeding of KND and BD may improve the performance and the carcass yield of KND.

• Korean Journal of Poultry Science
• /
• v.36 no.4
• /
• pp.337-342
• /
• 2009

This work was conducted to investigate the manure excreta and chemical compositions of layers. Two hundred 1-d-old ISA Brown layers were used in this work, and ten of 200 layers were selected for measurement of manure excreta with feeding phase. Means of the manure excreta per bird, the moisture content of poultry, and the dried manure were $124.7\;{\pm}\;27.5\;g$/bird/day, $76.9\;{\pm}\;1.9%$, and $29.1\;{\pm}\;3.9\;g$/bird/day, respectively. N, $P_2O_5$, and $K_2O$ of manure (55 weeks) were $1.39\;{\pm}\;0.139$, $0.62\;{\pm}\;0.11$ and $0.68\;{\pm}\;0.09%$, respectively. pH, $BOD_5$, $COD_{Mn}$, and suspended solids (SS) were $8.19\;{\pm}\;0.71$, $50,266\;{\pm}\;621\;mg/L$, $62,832\;{\pm}\;803\;mg/L$, and $121,725\;{\pm}\;16,165\;mg/L$, respectively. Heavy metal contents in the manure were $0.003\;{\pm}\;0.0013\;ppm$ for Hg and $0.008\;{\pm}\;0.0012\;ppm$ for Pb, the latter of which was highly low compared with the standard (150 ppm), but no Cd was detected. The results of this work show the average excretion amounts and chemical compositions of layer's manure, which is used as an organic fertilizer.

• Korean Journal of Poultry Science
• /
• v.37 no.4
• /
• pp.423-431
• /
• 2010

This work was carried out to investigate on the retail cut yield and the meat quality of crossbred ducks. A total of 360 pullets that were produced from 4 mating methods used in this work. Four mating method were A) native ducks (female) $\times$ native ducks (male), B) meat-type ducks (female) $\times$ native ducks (male), C) native ducks (female) $\times$ meat-type ducks (male), and D) meat-type ducks (female) $\times$ meat-type ducks (male). Ducks were bred at the flat house, and selected nine ducks with similar weights from each treatment at the certain weeks (A, B, C 8 weeks; D 6 weeks). Selected ducks were slaughtered, calculated the retail cut yield(wing, back, neck, breast, leg), analyzed the physico-chemical compositions, and tested the sensory evaluation. Wing and neck meat ratios of D treatment were lowest (P<0.05), and breast meat ratio of B treatment was high (P<0.05) compared to other treatments. pH of duck meat was no difference among treatments, fat and protein contents of B treatment was highest, and collagen contents of D treatment was highest among all treatments. Meat color and physical compositions was no difference among treatments. Juiciness of D treatment meats was highest, and there was no difference between B and D treatments. Finally, mating method of native duck and meat-type duck affected on the retail cut yield, but did not improve on the physico-chemical compositions and sensory evaluation.