• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.31-39
• /
• 2010

Although driving patterns strongly influence greenhouse gas and air pollutant emission rate from light duty vehicles, emission measurements have been mainly based on chassis dynamometer testing with one standard driving pattern. And there has been limited work on quantifying the independent effect of driving parameters on emission rate because of multidimensional nature of real-world driving pattern. The objective of this study is to obtain the quantitative effect of relative positive acceleration (RPA) on vehicle emission rate. RPA has been used to define the occurrence of acceleration demanding large amounts of power in certain driving distance and shown to be a significant affecting parameter for real-world emission rate. 40 driving patterns have been developed with fixed driving parameters to investigate independent effect of RPA. For the same values of average vehicle speed and power, the trend in carbon dioxide emission rate and fuel consumption with respect to RPA is very clear. Emission rate of nitrogen oxide and particulate matter also increase with respect to RPA, but the trend is less clear. Carbon dioxide emission from diesel vehicle appear to be more affected by high accelerations compared to that from gasoline vehicle because of high intake air restriction during acceleration caused by turbocharger and intercooler. The results have implications for the possible reduction of environmental effects through better traffic planning and management, driver education and car design.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.25 no.2
• /
• pp.99-103
• /
• 2014

A laryngeal web is connective tissue covered with epithelium stretching between both sides of the true vocal cords. Laryngeal webs were first reported by Fleischmann in 1882, and they cause upper airway obstruction and abnormalities of phonation. Congenital webs result from an arrest of reabsorption of the epithelium of the larynx at the tenth week of the fetus. The most common site of webbing is the anterior commissural glottic area, followed by other glottic areas and rarely subglottic or supraglottic areas. We have experienced two cases of congenital laryngeal webs. The webs were operated in two different methods. The first was excised under magnified vision through a laryngoscope, with a silastic keel secured between the raw surfaces of the separated mucosa. In the second case, the deepithelialized surfaces were exposed for a certain time length to mitomycin C to prevent postoperative webbing. We, hereby, report our experience of the diagnosis and management of two cases of a rare entity known as the congenital laryngeal web, and discuss the results with relevant studies.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.470-474
• /
• 2003

DNA sequence information on small-subunit rRNA gene (16S rDNA) obtained from food-poisoning bacterial culture was used to investigate the presence of bacterial pathogens in food. By reverse dot blot detection method, presence of food-poisoning bacteria could be confirmed on hybridization of digoxigenin-labeled 16S rDNA Polymerase Chain Reaction (PCR) primer product and biotin-labeled specific oligonucleotide probe. Escherichia coli, Bacillus cereus. and Salmonella sp. were used as the representative food-poisoning bacterial microorganisms. An oligonucleotide probe, based on the variable region of 16S rRNA gene, was used as the specific probe. These tools may be more useful than classic biochemical method for rapid identification of contaminated food.

• The Journal of the Korean dental association
• /
• v.55 no.1
• /
• pp.63-70
• /
• 2017

Materials and methods: Sixty extracted premolars were assigned to three groups according to the root canal system (Weine's classification; type I, II and III) of 20 teeth each using radiographic examination. The root tip was cut horizontally 1 mm from the anatomical apex and the apical cross-section was visualized using microscope at x50 magnification and photographed. Minimum and maximum apical root canal diameter of each tooth was measured and classified into three types by canal morphology (round, oval and flattened shape). Statistical analysis was performed to compare the apical root canal diameter and morphology according to the root canal system. Results: In apical root canal morphology at cross-sectional view, the most common shape was round in type I, flat in type II, and oval in type III. In apical root canal diameters at cross-sectional view, there was a significant difference between the minimum and maximum diameter in all types (p<0.05). The maximum diameter was 0.331 mm in type I, 0.519 mm in type II, and 0.310 mm in type III. There was a significant difference among type I, III and type II (p<0.05). Conclusion: The morphology and diameter of apical root canal was different according to the root canal system. Therefore, clinicians should consider the apical file size in view of the apical root canal shape according to the root canal system.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.1
• /
• pp.10-23
• /
• 2009

Korean small coastal fishing boats have the different kind of fisheries and customs against Japanese fishing boats. Those bring some influences on the principal parameters of hull form. In same displacement, Korean small coastal fishing boat has generally shorter length, draft and wider breadth than Japanese fishing boat. Furthermore, even though the parameters of each hull form are similar, it is known that the resistance performance of Korean small coastal fishing boat is worse than that of Japanese fishing boat. In this study, the representative hull forms of Korean and Japanese small coastal fishing boats are selected and compared to evaluate the resistance performance of Korean fishing boat in low-speed range. The hull form of the Korean fishing boat is modified as comparison with that of the Japanese fishing boat to confirm the partial characteristic differences between the hull forms and the resistance performances. The representative partial characteristics of hull form are the gradient of chine line, keel shape and stern length. The resistance performances of the modified hull forms are evaluated by INHAWAVE which is one of CFD program and model tests in towing tank. The results of the present study will be used to improve the resistance performance and to develop the practical hull form of Korean small coastal fishing boats as principal data in the preliminary hull form design of fishing boats.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.4
• /
• pp.1130-1147
• /
• 2014

Large size ships have a very flexible construction resulting in low resonance frequencies of the structural eigen-modes. This feature increases the dynamic response of the structure on short period waves (springing) and on impulsive wave loads (whipping). This dynamic response in its turn increases both the fatigue damage and the ultimate load on the structure; these aspects illustrate the importance of including the dynamic response into the design loads for these ship types. Experiments have been carried out using a segmented scaled model of a container ship in a Seakeeping Basin. This paper describes the development of the model for these experiments; the choice was made to divide the hull into six rigid segments connected with a flexible beam. In order to model the typical feature of the open structure of the containership that the shear center is well below the keel line of the vessel, the beam was built into the model as low as possible. The model was instrumented with accelerometers and rotation rate gyroscopes on each segment, relative wave height meters and pressure gauges in the bow area. The beam was instrumented with strain gauges to measure the internal loads at the position of each of the cuts. Experiments have been carried out in regular waves at different amplitudes for the same wave period and in long crested irregular waves for a matrix of wave heights and periods. The results of the experiments are compared to results of calculations with a linear model based on potential flow theory that includes the effects of the flexural modes. Some of the tests were repeated with additional links between the segments to increase the model rigidity by several orders of magnitude, in order to compare the loads between a rigid and a flexible model.

• Korean Journal of Microbiology
• /
• v.38 no.2
• /
• pp.107-112
• /
• 2002

To isolate the bacteria lysing cyanobacteria, the sediment samples were collected from Dochang and Pal'tang Reservoir and Seokchon Lake. Each sample was smeared on the Anabaena cylindrica lawn and incubated in light chamber for 11 days. Bacteria having cyanobacteria-Iysing activity were isolated from the samples of Seokchon reservoir. Confirmation of cyanobacteria-Iysing activity was carried out to measure chlorophyll a and bacterial cell counting in mixed culture of Anabaena cylindrica and bacteria. Lysis was detected when extracellular meterials was added to the Anabaena cylindrica culture. The isolate was identified by analysis based on 16S rDNA sequence and morphological and physiological properties. The bacterial strain was taxonomically studied by the phylogenetic analysis based on 165 rDNA sequence. This strain was identified as a member of the genus Bacillus and designated as Bacillus sp. CHS1.

• The Journal of Korean Medicine
• /
• v.17 no.1 s.31
• /
• pp.222-233
• /
• 1996

In order to understand the stimulation quality of Artemisine Vulgaris Folium(Bong), Mori Ramulus(Sangi) and Persicae Ramulus(Dogi) combustion, and get the basic data for the development of electric moxibustion apparatus, the average temperature, peak temperature, average gradient temperature, maximum gradient temperature and combustion time of heating period on the three moxa materials were measured. 1. The average combustion temperature was high in order of Dogi, Sangi and Bong, and these were acknowledged to have a significant difference each other in the average temperature. 2. The peak combustion temperature among those was high in order of Dogi, Sangi and Bong, and Bong was acknowledged to have significant differences with Dogi and Sangi. Sangi and Dogi however were not acknowledged to have difference each other. 3. The average gradient temperature among those was high in order of Dogi, Sangi and Bong, and Bong was proved to have significant differences with Dogi and Sangi. Sangi and Dogi however were not proved to have difference each other. 4. The maximum temperature among those was high in order of Dogi, Sangi and Bong, bong was acknowledged to have signigicant differences with Dogi and Sangi, but Sangi and Dogi were not proved to have difference each other. 5. The combustion time was short in order of Dogi, Sangi and Bong. Bong was acknowledged to have significant differences with Dogi and Sangi, but Sangi and Dogi were not. In order to understand well the characteristics of combustion, it is required to have a quantitative interpretation of combustion calory, and, in the future, we expect it is required to have a consistent study for the clinical effectiveness and the mutual relationship according to the combustion characteristics.

• Restorative Dentistry and Endodontics
• /
• v.28 no.2
• /
• pp.178-183
• /
• 2003

The purpose of this study was to investigate the frequency of 7 putative pathogens in endodontic infections. The specimens were collected from infected pulpal tissue of patients who were referred for root canal treatment to the department of conservative dentistry, Chosun University Samples were collected aseptically using a barbed broach and a paper point. The cut barbed broaches and paper points were transferred to an eppendorf tube containing 500 ml of 1 X PBS. DNAs were extracted from the samples by direct DNA extraction method using lysis buffer (0.5% EDTA, 1% Triton X-100). Identification of 7 putative pathogens was performed by PCR based on 16S rDNA. The target species were as follows : Porphyromonas endodontalis, Porphyromonas gingivalis, Prevotella intermedia, Prevotella nigrescens, Bacteroides forsythus, Actinobacillus actinomycetemcomitans, and Treponema denticola. Our data revealed that the prevalence of P. endodontalis was found in 88.6% (39/54), P. ginivalis 52.3% (23/44), P. nigrescens 18.2% (8/44), P intermedia 15.9% (7/44) B. forsythus 18.2% (8/44), A. actinomycetemcomitans 3.3% (1/44), T. denticola 25% (l1/44) of the samples. The high prevalence of P. endodontalis and P. ginivalis suggests that they may play an important role in the etiology of endodontic infections.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.474-482
• /
• 2000

Currently frequency-dependent type electronic apex locators have been widely used to determine the working length in endodontic treatment. But, accuracy of electronic apex locators is controversial. The purpose of this study was to evaluate the accuracy of Root-ZX(Morita Co., Japan) at different kinds of conditions of root canals compared with the radiographic working length. The 40 extracted human anterior teeth with fully formed apices and without any caries were used. The radiographs were taken for working length with the 0.5mm short of #15 K-file tip just visible at the foramen under the surgical microscope(Carl Zeiss Co. Germany) at 25X. Then the electronic working lengths were determined with Root-ZX at the different kinds of conditions of root canals according to the presence of electrolyte and Crown-down pressureless technique. The results were as follows ; 1. There was no significant statistical difference in working length between radiograph and Root-ZX. 2. There was no significant statistical difference in electronic working length between the canal with electrolyte and without electrolyte. 3. There was no significant statistical difference in electronic working length between the canal without any instrumentation and after Crown-dow pressureless technique. 4. Of the total 40 root canals, 85% in Group I, 92.5% in Group II, 95% in Group III and 95% in Group IV using Root-ZX showed coincidence within 0.5mm accuracy compaing with the radiographic working length. The results showed that the Root-ZX can be use effectively for measuring the working length of root canal after instrumentation with Crown-down pressureless technique regardless of the presence of electrolyte in root canal.