• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.747-754
• /
• 2014

In spite of its usefulness for health monitoring of structures on steady external load, the statistical pattern recognition technology (SPRT), based on Mahalanobis distance theory (MDT), is not good enough for the health monitoring of structures on large variability external load like earthquake. Damage is usually determined by the difference between the average measured value of undamaged structure and the measure value of damaged one. So when external variability gets larger, the difference gets bigger along, which is thus easily mistaken for a damage. This paper aims to overcome the problem and develop an improved Mahalanobis distance theory (IMDT), that is, a SPRT with revised MDT in order to decrease external variability so that we will be able to continue to monitor the structure on uncertain external variability. This method is experimentally tested to see if it precisely evaluates the health of a cable-stayed bridge on each general random load and earthquake load. As a result, the IMDT is found to be valid in locating structural damage made by damaged cables by means of data from undamaged cables. So it is proved to be effectively applicable to the health monitoring of bridges on external load of variability.

• Clinical and Experimental Pediatrics
• /
• v.50 no.3
• /
• pp.277-283
• /
• 2007

Purpose : Acute renal failure (ARF) is an important complication of rhabdomyolysis. The purpose of this study was to identify the major causes of rhabdomyolysis in children and to identify the factors associated with the developmet of ARF. Methods : A retrospective chart review between January 1997 to June 2005 was conducted of 60 patients with a diagnosis of rhabdomyolysis. Rhabdomyolysis was defined by an elevation of serum creatine phosphokinase (CK) greater than 1,000 IU/L with a MM fraction more than 95% or serum myoglobin>300 mg/dL or positive urine myoglobin. Patients were excluded if they had evidence of myocardial ischemia, or cerebrovascular insufficiency. Results : Sixty patients (37 males, 23 females) were enrolled, with the median age of 4.25 year. The most common causes of rhabdomyolysis were repiratory tract infection (9), seizure (7), hypoxia or asphyxia (6). Fifteen patients (25.0%) developed ARF and ten of them (66.0%) died. The initial serum creatinine, uric acid, potassium, pH and peak serum creatinine, initial systolic blood pressure, and mental status were statistically correlated with the development of ARF. The peak serum CK was associated with mortality of rhabdomyolysis. Conclusion : Acute renal failure was significant complication of rhabdomyolysis in children. Several clinical and laboratory factors were statistically associated with the development of ARF and death.

• Journal of Korean society of Dental Hygiene
• /
• v.5 no.1
• /
• pp.1-13
• /
• 2005

The study aimed to estimate the importance of job tasks, job training requirement and work satisfaction felt by dental hygienists to help dental hygienists work efficiently and effectively. A total of 142 dental hygienists working in dental hospitals located in J participated in the study. A SPSS 10.10 for Windows was used for statistical analysis. The statistical significance was defined as ${\alpha}$=.05. The results of the study are summarized as follows: 1. The mean score for the importance of job tasks was 4.09. The respondents considered dental clinic management and assistance to dentists the most important among their job descriptions showing the mean score of 4.44. The need for job training was 4.15 in average. The respondents wanted to have training on how to make a dental health insurance claim to receive payment other than any training with the mean score of 4.42. The work satisfaction of the respondents was 3.65 in average. The respondents were most satisfied with their work in dental assistance. 2. By the category of job tasks, the levels of importance of job tasks, job training requirement and work satisfaction were higher in plague removal with an ultrasonic scaler related to clinical oral prophylaxis, pit and fissure sealants related to preventive dental treatment and instruction in the correct usage of toothbrush related to public dental health education 3. In dealing with dental radiation machines, the radiation protection was considered the most important. While the training for periapical radiography was most needed, the respondents were satisfied with working in the same area. The levels of job importance, training requirement and work satisfaction were high in preventive dental care in the community performed in relation to the public dental health care. 4. In the dental health insurance claim category, the levels of importance of job task, training requirement and work satisfaction were higher in insurance claiming. The levels of job importance and training requirement were high in dental clinic management and assistance to dentists performed for preventive dental treatment. The work satisfaction was higher in maintaining medical chart records. The levels of job importance, training requirement and work satisfaction were higher in dental assistance in relation to dental protection. 5. There was significant relationship between the level of importance and work experience. Those with a longer period of work experience had higher levels of job importance in dental health insurance claim, dental clinic management and assistance to dentists and the overall task(pE0.05). 6. A significant relationship was observed between the need for job training in dental cleaning and preventive dental treatment and work experience. Those with more than 8 years of work experience demonstrated that job training is most needed(pE0.05). 7. The work satisfaction level was higher in the group with more than 8 years of work experience, compared with those in other work experience periods(pE0.05). 8. A positive correlation was seen between the level of importance and the need for job training among three variables.

• Journal of Hospice and Palliative Care
• /
• v.3 no.1
• /
• pp.60-73
• /
• 2000

Purpose : The purpose of this study was to describe a total pain model in patients with terminal cancer and to identify factors relating to total pain using the Twycross Pain Management Model, which included physical, psycho-social and spiritual pain. Method : The study was a retrospective descriptive study. The first stage included 87 patients who received hospice service at Y hospital in 1997. The second stage included five model patients who suffer severe pain as selected by the four hospice nurses. Data collection was from 1) chart analysis and 2) in-depth interviews with the hospice nurses about their selected patients. Data analysis was performed using SPSS-WIN and content analysis. Result : 1) The main problems of 3 patient with terminal cancer were pain(77%), constipation (25.3%), family coping(35.6%), psycho-spiritual distress(17.2%)and other symptoms. 2. The Twycross model was a useful model. However, new items were added; loneliness, depression, and no improvement in condition as depression factors. In anger, new items were anger due to family neglect, at God and in relationships. The case studies identified the followsing; 1) Patient suffer from physical pain as well as multiple other symptoms when cancer is advanced. 2) Body concept, role change, threat to self concept, fear of pain, fear of death, anxiety, family conflict, financial burden, spiritual distress, hope for a cure, are all affected. Conclusion : 1) It is believed that the Twycross model is useful but further tests and revisions are necessary for deciding priorities in the care plan. 2) Pain management must improve culturally appropriate and family support, psychological, spiritual care are imperative for patient with terminal cancer. 3) Further study is recommended to test correlations of depression, anxiety, spiritual distress and family coping using valid instruments. A qualitative study on the spiritual journey of the patient with terminal cancer is also recommended.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.1 s.47
• /
• pp.12-26
• /
• 2007

We have studied orientational characteristics of vertical rift and grain planes developing in 108 quarries for Mesozoic granites. Orientations of these planes vary in different localities. In general, orientations of these planes are predominantly NNE in South Korea. From the regional distribution chart, orientations of these planes show three dominant sets in terms of frequency orders: (1) $N2{\sim}10^{\circ}E(1st-order),\;(2)\;N15{\sim}25^{\circ}E(2nd-order),\;(3)\;N45{\sim}70^{\circ}E,\;N10{\sim}30^{\circ}W\;and\;N70{\sim}80^{\circ}W(3rd-order)$. These granite quarries are classified by the relative difference in the easiness of rock splitting between horizontal and vertical quarrying planes into: R-type, G-type, and H-type. The results showed that quarries for Triassic granites belong to R and G-types;those for Jurassic granites belong to R, G and H-types. In addition, quarries for Cretaceous granites belong mainly to R-type. Among these quarry types, the most diverse type was identified in the quarries for Jurassic granites. R-type (77.8%) shows a higher distribution ratio compared with G and H-types (22.2%). In general, anisotropy of physical properties is found in granitic rocks and there exists close correlation between orientations of granitic rock splitting planes and those of the open microcracks. Meanwhile, it has been reported that preferred orientations of open microcracks suggest maxinum principal stress orientations.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.3
• /
• pp.153-164
• /
• 2015

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. we have mainly discussed the structual anisotropy formed by microcracks. The phases of distribution of microcracks were well evidenced from the enlarged photomicrographs(${\times}6.7$) of the thin section. The planes of principal set of microcracks are parallel to the rift plane and those of secondary set are parallel to the grain plane. These rift and grain microcracks are mutually near-perpendicular on the hardway planes. From the directional angle(${\theta}$) - total length($L_t$), number(N) and density(${\rho}$) chart, the curve patterns of the above microcrack parameters reflect the phases of distribution of microcracks. Microcrack parameters such as number, length and density show an order of rift > grain > hardway. These results indicate a relative magnitude of the rock cleavage. Meanwhile, brazilian tensile strengths were measured with respect to the six directions. The results revealed a strong correlation between mechanical property with the above microcrack parameters. These general results correspond to those of the previous study for Jurassic granites from Pocheon and Hapcheon. Image processing technique for the enlarged photomicrograph of the thin section was carried out. The grain 1(G1) microcrack arrays developed in quartz and feldspar grains show excellent distribution on the photomicrograph. In particular, the directional angle of each microcrack set can be ascertained easily by brief image processing for the above photomicrograph.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.4
• /
• pp.679-690
• /
• 2011

Two widely used approaches for improving the quality of the output of a process are statistical process control (SPC) and automatic process control (APC). In recent hybrid processes that combine aspects of the process and parts industries, process variations due to both the inherent wandering and special causes occur commonly, and thus simultaneous application of APC and SPC schemes is needed to effectively keep such processes close to target. The simultaneous implementation of APC and SPC schemes is called integrated process control (IPC). In the IPC procedure, the output variables are monitored during the process where adjustments are repeatedly done by its controller. For monitoring the APC-controlled process, control charts can be generally applied to the output variable. However, as an alternative, some authors suggested that monitoring the input variable may improve the chance of detection. In this paper, we evaluate the performance of several monitoring statistics, such as the output variable, the input variable, and the difference variable, for efficiently monitoring the APC-controlled process when we assume IMA(1,1) noise model with a minimum mean squared error adjustment policy.

• Journal of radiological science and technology
• /
• v.25 no.2
• /
• pp.57-64
• /
• 2002

The recent development of embodiment technology of the medical images makes most medical institutions introduce PACS(Picture Archiving and Communication System) in haste. However lots of PACS solutions, currently developed and distributed, haven't been able to serve the convenience of users and to satisfy user's demand because of economic limitations and administrator-oriented considerations in the process of development. So we have developed MIH(Medical Image History), by which we can search and refer to the patient's medical images and information with few restrictions of time and space for diagnosis and treatment. This program will contribute to the improvement in the medical environment and meet the clients' need. We'll make more effort to develop the application which insures the better quality of medical images. MIH manages the patient's image files and medical records like film chart in connection with time. This trial will contribute to the reduction of the economical loss caused by unnecessary references and improve the quality in the medical services. The demand on the development or the program which refers to the medical +ata quickly and keeps them stable will be continued by the medical institute. This will satisfy the client's demand and improve the service to the patients in that tile program will be modified from the standpoint of the users. MIH is trying to keep user-oriented policy and to apply the benefit of the analog system to the digital environment. It is necessary to lead the public to the better understanding that the systematic management and referring of the medical images is as important as the quality of the images.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.3
• /
• pp.327-331
• /
• 2011

Purpose: The purpose of this study was an accurate grasp of the astigmatic change due to eyes accommodation on near vision and suggested problems occurring accommodative astigmatism using near glasses. Methods: 154 subjects(308eyes) from 20 to 40 years selected for this study who had many opportunity of near vision. First, far vision corrective refraction measured using the phoropter, and then both eyes opened simultaneously for maintaining the function of binocular put away dot chart 40 cm. One eye was fogging and the other eye measured near vision astigmatism axis and degrees astigmatism using cross cylinder, and then compared with far astigmatism. Results: Increased degree of astigmatism persons on near vision more than decreased or did not changed degree of astigmatism persons, which could affect visual acuity more than 0.75 diopters in 30 eyes with an increase of 9.7% of total subjects. Direct astigmatism and oblique astigmatism were increased on near vision. Astigmatic axes were rotated base in direction on both eyes and 66.9% of subjects were more than ${\pm}$5$^{\circ}$ rotation. Due to the rotation axis of astigmatism, residual astigmatism is expected to occur and expect to adversely affect the eyes. Conclusions: Long-term using the glasses without correction of increased astigmatic and rotated axis on near vision should occur new residual astigmatism and increase the asthenopia also. Considered to be taken astigmatic change on near vision during near refraction examination.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.2
• /
• pp.151-163
• /
• 2016

The characteristics of the rock cleavage in Jurassic granite from Geochang were analysed. The evaluation for the three directions of rock cleavages was performed using the parameters such as (1) frequency of microcrack spacing(N), (2) total spacing(${\leq}1mm$), (3) mean spacing($S_{mean}$), (4) difference value($S_{mean}-S_{median}$) between mean spacing($S_{mean}$) and median spacing($S_{median}$), (5) density of spacing(${\rho}$), (6) difference value between two exponents for the whole range of the diagrams(${\lambda}_H-{\lambda}_L$), (7) mean value of exponent(${\lambda}_M$), (8) mean value of exponential constant($a_M$), (9) difference value between two exponents for the section under the initial points of intersection(${\lambda}t_H-{\lambda}t_L$), (10) mean value of exponent(${\lambda}t_M$) and (11) mean value of exponential constant($at_M$). The results of correlation analysis between the values of parameters for three rock cleavages and those for three planes are as follows. The values of (I) parameters(1, 2, 7 and 8) and (II) parameters(3, 4 and 5) are in orders of (I) H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2) and (II) R < G < H. On the contrary, the values of the above two groups(I~II) of parameters for three planes show reverse orders. Besides, the values of parameter $6({\lambda}_H-{\lambda}_L)$, parameter $9({\lambda}t_H-{\lambda}t_L)$, parameter $10({\lambda}t_M)$ and parameter $11(at_M)$ for three planes are in orders of R(rift plane, (G1 + H2)/2) < H(hardway plane, (R2 + G2)/2) < G(grain plane, (R1 + H2)/2), H < G < R, H < R < G and R < H < G, respectively. The values of the above four parameters for three rock cleavages show the various orders of R < H < G, R < H < G, H < G < R and H < G < R, respectively. Meanwhile, the spacing values equivalent to the initial points of contact and intersection between the two directions of diagrams were derived. The above spacing values for three rock cleavages are in order of rift(R1 and R2) < grain(G1 and G2) < hardway(H1 and H2). The spacing values for three planes are in order of rift plane(G1 and H1) < hardway plane(R2 and G2) < grain plane(R1 and H2). In particular, the intersection angles for three rock cleavages and three planes are in order of rift and rift plane < hardway and hardway plane < grain and grain plane. Consequently, the two diagrams of rift(R1 and R2) and rift plane(G1 and H1) show higher frequency of the point of contact and intersection. These characteristics of change were derived through the general chart for three planes and three rock cleavages. Lastly, the correlation analysis through the values of parameters along with the distribution pattern is useful for discriminating three quarrying planes.