• Journal of Acupuncture Research
• /
• v.23 no.1
• /
• pp.187-215
• /
• 2006

Objectives : To determine whether the pragmatic acupuncture treatment provides more effective pain relief than treatment using the same acupuncture point to the all patients. Methods : We randomly allocated participants to treatment group 1 and 2. The group 1 is the pragmatic treatment group and the group 2 is using the same acupuncture point to the all patients. Primary outcomes were measured by the Western Ontario and McMaster Universities Osteoarthritis index(WOMAC) pain and function scores at 4, 8, and 14 weeks. Secondary outcomes were measured by 100mm VAS(Visual Analog Scale), ROM(Range of Motion) using Goniometer, and pain threshold using pressure algometer. Results : When patients were extension of the knee, they were statistically significant in improvement of the ROM in 14 weeks. Whole body condition and pain rate through VAS measurement were improved significantly in 14 weeks. Also pain score and function score of WOMAC were improved significantly in 14 weeks. We could get difference in pain score of two acupuncture groups significantly in 14 weeks. But we could not get difference in whole score of two acupuncture groups significantly. Local temperature using T.C thermometer was changed significantly in 14 weeks. But we could not get difference in whole score of two acupuncture groups significantly. Excluding above item, DITI, pain threshold, and ROM of the knee flexion were no difference in before and after treatment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.4
• /
• pp.269-279
• /
• 2003

This study investigated the mechanical properties of precious metal-ceramic alloy joined by the laser-welding and the soldering compared with the parent metal. Twenty-four tensile specimens were cast in precious metal-ceramic alloy and divided into three groups of eight. All specimens in the control group(group 1) were left in the as-cast condition. Group 2 and 3 were the test specimens, which were sectioned at the center. Eight of sectioned specimens were joined by soldering with a propane-oxygen torch, and the remaining specimens were joined by laser-welding. After joining, each joint diameter was measured, and then tested to tensile failure on an Instron machine. Failure loads were recorded, and then fracture stress(ultimate tensile strength), 0.2% yield strength and % elongation calculated. These data for three groups were subjected to a one-way analysis of variance(ANOVA). Neuman-Keuls post hoc test was then used to determine any significant differences between groups. The fracture locations, fracture surfaces were examined by SEM(scanning electron microscope). The results were as follows: 1) The tensile strength and 0.2% yield strength of the soldered group($280.28{\pm}49.35MPa$, $160.24{\pm}26.67MPa$) were significantly less than both the as-cast group($410.99{\pm}13.07MPa$, $217.82{\pm}17.99MPa$) and the laser-welded group($383.56{\pm}59.08MPa$, $217.18{\pm}12.96MPa$). 2) The tensile strength and 0.2% yield strength of the laser-welded group were about each 98%, 99.7% of the as-cast group. There were no statistically significant differences in these two groups(p<0.05). 3) The percentage elongations of the soldered group($3.94{\pm}2.32%$) and the laser-welded group($5.06{\pm}1.08%$) were significantly less than the as-cast group($14.25{\pm}4.05%$) (p<0.05). 4) The fracture of the soldered specimens occurred in the solder material and many porosities were showed at the fracture site. 5) The fracture of the laser-welded specimens occurred also in the welding area, and lack of fusion and a large void was observed at the center of the fracture surface. However, the laser-welded specimens showed a ductile failure mode like the as- cast specimens. The results of this study indicated that the tensile strengths of the laser-welded joints were comparable to those of the as-cast joints and superior to those of the soldered joints.

• Journal of Korean Medicine Rehabilitation
• /
• v.27 no.3
• /
• pp.61-70
• /
• 2017

Objectives The purpose of this review is to analyse the trend in papers related with Korean Medicine Treatment after musculoskeletal disorder surgery. Methods We reviewed Korean Medicine papers by searching Korean web databases 'Korea Traditional Knowledge Portal', 'Scientific and Technological Information Integration Service (NDSL)', 'Academic Research Information Service (RISS)', 'Korea Medical Informati on Portal (OASIS)'. We classified the papers by the year of publishment, the title of journals, the type of study, surgery region, chief complain after surgery, main treatment, periods after surgery, assessment for outcomes. Results 1. Korean Medicine treatment after musculoskeletal disorder surgery has received more attention than in the past and there are attempts to do various studies besides the case reports. 2. 41 research papers were divided in to 3 original articles, 3 review articles, 35 case reports. But almost presented a low level of evidence. 3. Pain was the most common symptom after the musculoskeletal disorder surgery. Pain should be the primary goal of Korean rehabilitation treatment after musculoskeletal disorder surgery. 4. Assessment tools for outcome were concentrated in questionnaries, VAS and NRS. In order to evaluate better, it is necessary to evaluate the overall condition of the patient such as the quality of life evaluation and patient satisfaction. Conclusions In this study, we expect that the development and clinical application of Korean rehabilitation treatment program after musculoskeletal disorder surgery will be actively pursued.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.642-653
• /
• 2006

Purpose : The purpose of this study was to investigate the effect of the output energy(voltage) of laser welding on the strength and properties of joint of cast titanium(CP Gr II) and titanium alloy(Ti-6Al-4V). Material and method : Cast titanium and its alloy rods(ISO6871) were prepared and perpendicularly cut at the center of the rod. After the cut halves were fixed in a jig, and the joints welded with a laser-welding machine at several levels of output voltage of $200V{\sim}280V$. Uncut specimens served as the non-welded control specimens The pulse duration and pulse spot size employed in this study were 10ms and 1.0mm respectively. Tensile testing was conducted at a crosshead speed of 0.5mm/min. The ultimate tensile strength(MPa) was recorded, and the data (n=6) were statistically analyzed by one-way analysis of variance(ANOVA) and Scheffe's test at ${\alpha}$=0.05. The fracture surface of specimens investigated by scanning electron microscope (SEM). Vickers microhardness was measured under 500g load of 15seconds with the optimal condition of output voltage 280V. Results : The results of this study were obtained as follows, 1. When the pulse duration and spot size were fixed at 10ms and 1.0mm respectively, increasing the output energy(voltage) increased UTS values and penetration depth of laser welded to titanium and titanium alloy. 2. For the commercial titanium grade II, ultimate tensile strength(665.3MPa) of the specimens laser-welded at voltage of 280V were not statistically(p>0.05) different from the non-welded control specimens (680.2MPa). 3. For the titanium alloy(Ti-6Al-4V), ultimate tensile strength(988.3MPa) of the specimens laser-welded at voltage of 280V were statistically(p<0.05) different from the non-welded control specimens (665.0MPa). 4. The commercial titanium grade II and titanium alloy(Ti-6Al-4V) were Vickers microhardness values were increased in the fusion zone and there were no significant differences in base metal, heat-affected zone.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.2
• /
• pp.91-97
• /
• 2014

With Pb-free solder joints containing Sn-Ag-Cu-based ternary alloys (Sn-1.0 wt.%Ag-0.5Cu and Sn-4.0Ag-0.5Cu) and Sn-Ag-Cu-In-based quaternary alloys (Sn-1.0Ag-0.5Cu-1.0In, Sn-1.2Ag-0.5Cu-0.4In, Sn-1.2Ag-0.5Cu-0.6In, and Sn-1.2Ag-0.7Cu-0.4In), fracture-mode change, shear strengths, and fracture energies were observed and measured under a high-speed shear test of 500 mm/s. The samples in each composition were prepared with as-reflowed ones or solid-aged ones at $125^{\circ}C$ to 500 h. As a result, it was observed that ductile or quasi-ductile fracture modes occurs in the most of Sn-Ag-Cu-In samples. The happening frequency of a quasi-ductile fracture mode showed that the Sn-Ag-Cu-In joints possessed ductile fracture properties more than that of Sn-3.0Ag-0.5Cu in the high-speed shear condition. Moreover, the Sn-Ag-Cu-In joints presented averagely fracture energies similar to those of Sn-Ag-Cu joints. While maximum values in the fracture energies were measured after the solid aging for 100 h, clear decreases in the fracture energies were observed after the solid aging for 500 h. This result indicated that reliability degradation of the Sn-Ag-Cu-In solder joints might accelerate from about that time.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.45-50
• /
• 2017

We investigated effect of Zn content on shear strengh of Sn-0.7Cu-xZn and OSP surface finished solder joints. Five pastes of Sn-0.7Cu-xZn (x=0, 0.5, 1.0, 1.5, 2.0 wt.%) solders were fabricated by mixing of solder powder and flux using planatary mixer. $180{\mu}m$ diameter solder balls were formed on OSP surface finished Cu electrodes by screen print method, and the reflow process was performed. The shear strength was evaluated with two high shear speeds; 0.01 and 0.1 m/s. The thickness of the intermetallic compound(IMC) layer was decreased with increasing Zn content in Sn-0.7Cu-xZn solder. The highest shear strength was 3.47 N at the Zn content of 0.5 wt.%. As a whole, the shear strength at condition of 0.1 m/s was higher than that of 0.01 m/s because of impact stress. Fracture energies were calculated by F-x (Force-displacement) curve during high speed shear test and the tendency of fracture energy and that of shear strength were good agreement each other. Fracture took place within solder matrix at lower Zn content, and fracture occured near the interface of OSP surface finished Cu electrode and solder at higher Zn content.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.117-126
• /
• 2001

In this research, evaluation of adhesion in tension property of SBR-modified concrete to ordinary portland cement concrete was conducted with uniaxial direct tensile bond test which was proposed by Kuhlmann. A test set-up was fabricated in order to minimize the eccentric force by introducing a joint which might fully rotate. The main experimental variables were cement-latex ratios, surface preparations and moisture levels. The results obtained were as follows: The LMC specimen at 15% latex-cement ratio increased the adhesion in tension by range of 37% compared to that of conventional cement concrete. This might be due to latex film formed between cement paste and aggregate. The effects of surface preparation on bond of latex modified concrete to conventional concrete were significant at the conditions by sand paper and wire brush. A better bond could be achieved by rough surface rather than smooth. The saturated and surface dry (SSD) condition were considered to be the most appropriate moisture level followed by wet, finally by dry. Thus, a proper surface preparation and moisture level are quite necessity in order to obtain better bonding at LMC overlay.

• Korean journal of communication and information
• /
• v.16
• /
• pp.168-206
• /
• 2001

This study attempts to examine the relationships between the major market-based media and the government after closing military regime era, 1961-1987. After the military regime was collapsed, while the mass media in Korea obtained independence and autonomy from government, they have been confronted with the terrible competition not so much comparatively as before. The watchdog role in the traditional liberalism, which is regarded as normative relationship between the media and the government would be transformed in accordance with the market condition and the maturity of democracy. Thus, the watchdog metaphor has been variously deviated in rower-centered society; lap dog, guard dog, attack dog. liberalists argue that the primary democratic role of the media is to art as a public watchdog overseeing the state. Social democrats, however, criticize them as simplistic conception which could be only applied to the government. They argue that the media should be seen as a source of redress against the abuse of all forms of power over others; the home, the economy, and the civil society. The lap dog view is that the media is overwhelmingly dependent on the established power structure contrary to the watchdog. While the guard dog perspective is a means to preserve the power structure alarming with playing 'conflict role', the attack do8 aims to the private interest of the media in intruding into the politics. The attack dog perspective by T. Patterson could be composed of the interpretive style of report, the game schema report over the policy schema in the election, and the negativism against politics and government. The market-dominant press has been likely to transform from lap-guard dog into attack-guard dog. In Roh Tae Woo government(1988-1992), while the press was a lessened lap-guard dog before three parties merger in 1990, after merger the press had been transformed as the reinforced lap-guard dog because this merger entailed joint, party-to-party negotiations, and the formation of the new party preceded by dissolution of the ruling blot. In the early stage of Kim Young Sam government(1993-1997), the press has kept in pace with the reform movement drive-forced by the government. However, the press withdrew the support of Kim's reform in reaching the level of threat to ruling bloc. The press coalesced only circumstantially with government and was interested in preserving some margin of independence. The failure of Kim's reform proved the political muscle of the press in post-autho-ritarianism. In the middle stage of Kim Dae Jung government (1998-) that resulted in the shift of power structure as once-opposition party leader, the stress has been a manifested attack-guard dog owing to the anti-cold war policy, the realignment policy of power, and the minority-base of Kim's government. The press has endeavored to hold political communication within limits relatively less threatening to the established order.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.601-605
• /
• 2005

Three lines of White Leghorn (WL) chickens (IWJ, IWG and IWC) maintained at Central Avian Research Institute, Izatnagar (UP), were used for chorioallantoic membrane (CAM) and liver tumour (LT) assay. Eleven-day-old embryos of each line were partitioned into three groups and inoculated with 0.2 ml of subgroup A, subgroup C and an equal mixture of subgroup A and C Rous sarcoma virus (RSV). Subgroup virus receptor on the cell surface membrane for subgroup A is coded for by tumour virus a (tva) locus and for subgroup C by tumour virus c (tvc) locus. The random association of the genes at the tva and tvc loci in IWJ and IWC line was assessed and the $x^2$-values for phenotypic classes were found to be significant, indicating the linkage between the tva and tvc loci. The linkage value was estimated to be 0.09 on pooled sex and pooled line basis. On the basis of four subclass tumour phenotypes a 4-allele model was proposed for tva locus having $a^{s1}$, $a^{s2}$, $a^{r1}$ and $a^{r2}$ alleles and the frequencies were calculated as 0.47, 0.13, 0.13 and 0.27 for IWJ line, 0.31, 0.33, 0.14 and 0.22 for IWG line and 0.44, 0.11, 0.21 and 0.24 for IWC line, respectively. Similarly, for tvc locus the frequencies of four alleles i.e. $c^{s1}$, $c^{s2}$, $c^{r1}$ and $c^{r2}$ were calculated as 0.42, 0.20, 0.21 and 0.17 for IWJ line, 0.42, 0.17, 0.27 and 0.14 for IWG line and 0.30, 0.21, 0.16 and 0.33 for IWC line, respectively. The $x^2$-values for all classes of observations were not significant (p>0.05), indicating a good fit to the 4-allele model for the occurrence of 4-subclass tumour phenotypes for tva and tvc loci. On the basis of the 2-allele model both tva and tvc locus carries three genotypes each. But, on the basis of the 4-allele model tva and tvc locus carries 10 genotypes each. The interaction between A-resistance and C-resistance (both CAM and LT death) was ascertained by taking the 10 genotypes of tva locus and 3 genotypes of tvc locus by pooling the lines and partitioning the observations into 3 classes. The $x^2$-values for the genotypic classes of CAM (-) LT (+) and CAM (-) LT (-) phenotypes to mixed virus (A+C) infection were found to be highly significant (p<0.01), indicating increased resistance, which indicates the joint segregation of $a^r$ and $c^r$ genes, suggesting the existence of close linkage between the tva and tvc loci. Therefore, an indirect selection approach using subgroup C viruses can be employed to generate stocks resistant to subgroup A LLV, obviating contamination with the most common agent causing LL in field condition.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.133-141
• /
• 2007

The excavation damaged zone (EDZ) is an area around an excavation where in situ rock mass properties, stress condition, displacement, groundwater flow conditions have been altered due to the processes induced by the excavation. Various studies have been carried out on EDZ, but most studies have focused on the mechanical bahavior of EDZ by in situ experiment. Even though the EDZ could potentially form a high permeable pathway of groundwater flow, only a few studies were performed on the analysis of groundwater flow in EDZ. In this study, the 'hydraulic EDZ' was defined as the rock zone adjacent to the excavation where the hydraulic aperture has been changed due to the excavation by using H-M coupling analysis. Fundamental principles of distinct element method (DEM) were used in the analysis. In the same groundwater level, the behavior of hydraulic aperture near the cavern was analyzed for different stress ratios, initial apertures, fracture angles and fracture spacings by using a two-dimensional DEM program. We evaluate the excavation induced hydraulic aperture change. Using the results of the study, hydraulic EDZ was defined as an elliptical shape model perpendicular to the joint.