• Archives of Reconstructive Microsurgery
• /
• 제10권1호
• /
• pp.18-22
• /
• 2001

Purpose : The purpose of this study was to evaluate stress fracture of vascularized fibular grafts(VFG) by analyzing factors associated with stress fracture and the treatment results. Materials and Methods : From June 1985 to May 1998, 7 patients with stress fractures in the 38 patients with long bone defect who had vascularized fibular graft were evaluated with clinical and radiologic methods including grafted fibular length and hypertrophic index of de Boer. The average age of the patients was 35 years(range, $14{\sim}60$ years). The mean follow-up period was 20 months(range, $16{\sim}32$ months). Results: 7(18.4%) stress fractures occurred in 38 patients. Characteristics of the fractures were (1) all occurred at lower extremity of male patients treated with VFG for long bone defected caused by infected nonunion; (2) all occurred 10 months at the average(range, $4{\sim}17$ months) after VFG; and (3) the length and hypertrophic index of grafted fibula had no influence on the incidence of stress fracture. Union was obtained in 3 patients by conservative treatment. 4 patients obtained union by internal fixation; one at immediately onset of fracture; and three after failure of conservative treatment who had fracture around the knee joint. Conclusion : Stress fracture may occur during the first one year after vascularized fibular graft and more attention must be paid for prevention of it, especially in the cases of infected nonunion. Stress fracture around the knee joint was expected to lead to a good result of early union by operative treatment.

• 대한임상전기생리학회지
• /
• 제5권2호
• /
• pp.85-93
• /
• 2007

Summary of background data: It is researched until now and the researches against the effect of position cold treatment the effect which pain threshold, change of skin temperature, researches the effective stiffness, the coldness in the patient it applied and relax an inflammation do the researches against were insufficient. Purpose: This project was to see how much it gives effect by using the cold air therapy an inflammation relief of rheumatoid arthritis patient. Methods: The medical subjects were 10 people from standard to diagnosis category of American College of Rheumatology(ACR) who had rheumatoid arthritis and to inspect informations about inflammation relief, have inspected ESR(erythrocyte sedimentation rate) and WBC(white blood cells). The experiment method was to let the patient bend the joint and lay down flat and treat with cold air from 10 cm away from joint line repeating 5 minutes treatment 1 minute rest and 3 minutes treatment. ESR and WBC cold air therapy reported with 5 days gap and each patient has been applied for 3 times. Result: The 5th day and 10th days ESR and WBC value shows when using cold air therapy, there was a reduction on rejected group but didn't last long, but 15th day it showed only on WBC it had its attention. Conclusions: So the cold air therapy shows it has positive effects on inflammation relief of rheumatoid arthritis patient.

• 대한예방한의학회지
• /
• 제4권2호
• /
• pp.142-151
• /
• 2000

Objectives and Methods : This study was conducted to investigate chief complaints among famers. The subjects of this study were 640 famers who live in the rural area in Wanju-gun Jeonbuk province. They were received medical treatment by oriental doctors who visited each village from July 1996 to June 1999. The data of this study were collected from their medical charts . Results and Conclusions : The number of female patients was 449(70.16%) and the number of male patients was 191(29.84%). The group of patients above 70 years was 32.81%, 60-69 years 32.03%, 50-59 years 20.15%, 40-49 years 8.90%, and bellow 39 years 6.09%. The most frequent complaint in farmers was low back pain(27.16%) the second was knee joint pain(16.14%), the third was shoulder Pain(12.06%), and the fourth was headache-dizziness(9.59%). The frequency of musculoskeletal disease(64.48%) was most high, and cardiovascular disease(11.33%) was the second, gstrointestinal disease(10.73%) was the third, respiratory disease(3.42%) was the fourth. It is necessary to pay attention to musculoskeletal disease-especially low back pain and knee joint pain- in study and treatment of farmer's disease.

• 대한간호학회지
• /
• 제37권2호
• /
• pp.249-256
• /
• 2007

Purpose. Tai Chi exercise, an ancient Chinese martial art, has drawn more and more attention for its health benefits. The purpose of the study was to identify the effects of a Sun-style Tai Chi exercise on arthritic symptoms (joint pain and stiffness), motivation for performing health behaviors, and the performance of health behaviors among older women with osteoarthritis. Methods. Total of 72 women with the mean age of 63 years old were recruited from outpatients clinic or public health centers according to the inclusion criteria and assigned randomly to either the Tai Chi exercise group or the control. A Sun-style Tai Chi exercise has been provided three times a week for the first two weeks, and then once a week for another 10 weeks. In 12 weeks of study period, 22 subjects in the Tai Chi exercise group and 21 subjects in the control group completed the posttest measure with the dropout rate of 41 %. Outcome variables included arthritic symptoms measured by K-WOMAC, motivation for health behavior, and health behaviors. Results. At the completion of the 12 week Tai Chi exercise, the Tai Chi group perceived significantly less joint pain (t = -2.19, P = 0.03) and stiffness (t = -2.24, P = 0.03), perceived more health benefits (t = 2.67, P = 0.01), and performed better health behaviors (t = 2.35, P = 0.02), specifically for diet behavior (t = 2.06, P = 0.04) and stress management (t = 2.97, P = 0.005). Conclusion. A Sun-style Tai Chi exercise was found as beneficial for women with osteoarthritis to reduce their perceived arthritic symptoms, improve their perception of health benefits to perform better health behaviors.

• 대한정형도수물리치료학회지
• /
• 제12권2호
• /
• pp.11-20
• /
• 2006

Low back pain is often experienced by many people who are in an activity flag. Their work and daily life are affected by low back pain. There are many causes of low back pain. Among those many causes, this study was focused on a relation between low back pain and the tightness of iliopsoas. The study was implemented by measuring the angles of the hip joints in subjects consisting of a 30 patients group, who had been selected from the outpatients at the Median Hospital, and a 30 people control group from the outpatients at the M Hospital and employee of M hospital. The patients group consists of the patients with low back pain who have intermittently or continuously experienced low back pain within the last 6 months. The group also had no symptom of spondylolysis or spondylolithesis and no muscular abnormality in terms of pathology without any experience of disc or spine fusion operation. The control group consisted out of persons who had never experienced lower back pain and had never been subjected to physical therapy due to lower back pain. The hip joint angles of the subjects of this study were measured by means of the modified Thomas test position. Data was analysed by independent sampling t-test using SPSS 11.0. The following results were obtained: 1. The measured angles of patient's both hip joints were significantly smaller than the control group's. 2. In the males group, The angles of patients' both hip joints were smaller than the controls'. In the females group, The angles of patients' both hip joints were smaller than the controls'. In conclusion, this study demonstrates that there is a significant difference in the tightness of the iliopsoas muscles when comparing the patient group with the control group. We should therefore pay more attention in releasing the muscle tightness of iliopsoas muscles when performing physical therapy with patients with lower back pain.

• The Journal of Korean Physical Therapy
• /
• 제31권6호
• /
• pp.333-338
• /
• 2019

Purpose: Although previous studies on the screw-home movement (SHM) for autopsy specimen and walking of living persons conducted, the possibility of acquiring SHM based on inertial measurement units received little attention. This study aimed to investigate the possibility of measuring SHM for the non-weighted bearing using a micro-electro-mechanical system-based wearable motion capture system (MEMSS). Methods: MEMSS and camera-based motion analysis systems were used to obtain kinematic data of the knee joint. The knee joint moved from the flexion position to a fully extended position and then back to the start point. The coefficient of multiple correlation and the difference in the range of motion were used to assess the waveform similarity in the movement measured by two measurement systems. Results: The waveform similarity in the sagittal plane was excellent and the in the transverse plane was good. Significant differences were found in the sagittal plane between the two systems (p<0.05). However, there was no significant difference in the transverse plane between the two systems (p>0.05). Conclusion: The SHM during the passive motion without muscle contraction in the non-weighted bearing appeared in the entire range. We thought that the MEMSS could be easily applied to the acquisition of biomechanical data on the knee related to physical therapy.

• The Journal of Korean Physical Therapy
• /
• 제21권2호
• /
• pp.103-108
• /
• 2009

Purpose: Electrical stimulation is one of several treatments recommended for RA patients. Electrical stimulation of RA patients, reduces pain, or facilitates joint motion prior to exercises. However, there is still limited evidence on the efficacy of electrical stimulation and thus any conclusions drawn about this method remain controversial. Recently, Microcurrent Electrical Neuromuscular Stimulation (MENS) has received significant attention as a potential method of electrical stimulation. In this study, we investigated the effect of microcurrent treatment in rheumatoid arthritis rat. Methods: Subjects were allocated either to the control group or experimental group, which was subject to microcurrent stimulation. Interleukin-1 expression in the metatarsophlangeal joint and the oedema index in the ankle were used for classification and subsequent evaluation of pathology. Subjects were assessed at 1, 7 and 14 days after inducing rheumatoid arthritis through adjuvant injection. Thirty-six subjects, 18 in each group, were used in this study. Statistical analysis was performed by calculating the differences between the two groups and between each interval assessment. Categorical variables were compared between the two groups with the paired-T test. The one-way ANOVA test was performed to assess changes in ordinal variables. Results: Baseline characteristics were similar in both groups. Statistically significant differences were found between the two groups. The biological marker of pro-inflammatory cytokine and oedema index were decreased in response to this treatment. Conclusion: These data show that treatment of rheumatoid arthritis with a microcurrent stimulation device reduced the oedema index and pro-inflammatory cytokine IL-1.

• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.43-51
• /
• 2017

The automatic welding systems, have received much attention in recent years, because they are highly suitable not only to increase the quality and productivity, but also to decrease manufacturing time and cost for a given product. Automatic welding work in semiconductor or space industry to be carried out in pipe line and butt joint mostly and plasma arc welding(PAW) is actively applied. To get the desired quality welds in automated welding system is challenging, a mathematical model is needed that has complete control over the relevant process parameters in order to obtain the required mechanical properties. However, In various industries the welding process mathematical model is not fully formulated for the process parameter and on the welding conditions, therefore only partial variables can be predicted. Therefore, this paper investigates the interaction between the welding parameters and mechanical properties for predicting the weld bead geometry by analyzing the S/N ratio.

• 전자공학회논문지
• /
• 제51권12호
• /
• pp.30-45
• /
• 2014

최근 유비쿼터스 컴퓨팅 환경과 광대역 접속 환경을 필요로 하는 멀티미디어 어플리케이션 사용자가 급속히 증가하고 있으며, 이들에게 효율적인 네트워크 서비스를 제공할 수 있는 차세대 무선 네트워킹을 위한 핵심기술로서 무선 메쉬 네트워크가 주목받고 있다. 다수의 네트워크의 플로우들이 동시에 전송되는 경우, 각 플로우들의 경로 설정을 위한 경로 탐색과 각 플로우들의 전송을 위한 링크의 자원 할당은 네트워크의 효율성에 직접적으로 영향을 주는 요소 중 하나이다. 본 논문에서는 STDMA 기반의 무선 메쉬 네트워크에서 수리적 모델링을 사용하여 경로 탐색과 링크의 자원할당 문제를 동시에 고려하여 주어진 각 플로우들의 전송률을 최대로 수용할 수 있는 계층간 최적화 설계 기법을 이용한 알고리즘을 제안한다. 그리고, 성능 분석을 통하여 제안한 알고리즘이 다중 홉 무선 메쉬 네트워크를 경유하는 플로우들의 수가 늘어날 때 주어진 대역폭 자원을 최대로 활용하여 전송 성능을 향상 시킬 수 있음을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권7호
• /
• pp.3412-3432
• /
• 2019

Recent advances in radio frequency (RF) power transfer provide a promising technology to power sensor nodes. Adoption of mobile chargers to replenish the nodes' energy has recently attracted a lot of attention and the mobility assisted energy replenishment provides predictable and sustained power service. In this paper, we study the joint optimization of mobile charging and data gathering in sensor networks. A wireless multi-functional vehicle (WMV) is employed and periodically moves along specified trajectories, charge the sensors and gather the sensed data via one-hop communication. The objective of this paper is to maximize the uplink throughput by optimally allocating the time for the downlink wireless energy transfer by the WMV and the uplink transmissions of different sensors. We consider two scenarios where the WMV moves in a straight line and around a circle. By time discretization, the optimization problem is formulated as a 0-1 programming problem. We obtain the upper and lower bounds of the problem by converting the original 0-1 programming problem into a linear programming problem and then obtain the optimal solution by using branch and bound algorithm. We further prove that the network throughput is independent of the WMV's velocity under certain conditions. Performance of our proposed algorithm is evaluated through extensive simulations. The results validate the correctness of our proposed theorems and demonstrate that our algorithm outperforms two baseline algorithms in achieved throughput under different settings.