Journal of Welding and Joining

The Korean Welding and Joining Society (대한용접접합학회)
권호 표지
DOI QR코드

DOI QR Code

An Experiment Study for S/N Ratio of Bead Geometry for Guaranteeing the Welding Quality in Bellows Weld Joint

벨로우즈 용접부의 품질확보를 위한 비드형상 S/N비에 관한 실험적 연구

  • Lee, Jong-Pyo (Department of Machanical Engineering, Mokpo University) ;
  • Kim, Ill-Soo (Department of Machanical Engineering, Mokpo University) ;
  • Park, Min-Ho (Department of Machanical Engineering, Mokpo University) ;
  • Jin, Byeong-Ju (Department of Machanical Engineering, Mokpo University) ;
  • Kim, In-Ju (Green Manufacturing Process R&D Center, Korea Institute of Industrial Technology) ;
  • Kim, Ji-Sun (Green Manufacturing Process R&D Center, Korea Institute of Industrial Technology)
  • 이종표 (목포대학교 기계공학과) ;
  • 김일수 (목포대학교 기계공학과) ;
  • 박민호 (목포대학교 기계공학과) ;
  • 진병주 (목포대학교 기계공학과) ;
  • 김인주 (한국생산기술연구원 그린가공공정그룹) ;
  • 김지선 (한국생산기술연구원 그린가공공정그룹)
  • Received : 2016.09.08
  • Accepted : 2017.01.31
  • Published : 2017.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

The automatic welding systems, have received much attention in recent years, because they are highly suitable not only to increase the quality and productivity, but also to decrease manufacturing time and cost for a given product. Automatic welding work in semiconductor or space industry to be carried out in pipe line and butt joint mostly and plasma arc welding(PAW) is actively applied. To get the desired quality welds in automated welding system is challenging, a mathematical model is needed that has complete control over the relevant process parameters in order to obtain the required mechanical properties. However, In various industries the welding process mathematical model is not fully formulated for the process parameter and on the welding conditions, therefore only partial variables can be predicted. Therefore, this paper investigates the interaction between the welding parameters and mechanical properties for predicting the weld bead geometry by analyzing the S/N ratio.

Keywords

References

  1. K. Pal and S. K. Pal, Soft computing methods used for the modelling and optimisation of gas metal arc welding, International Journal of Manufacturing Research, 6-1 (2011), 15-29
  2. N. Murugan and R. S. Parmar, Effects of MIG process parameters on the geometry of the bead in the automatic surfacing of stainless steel, Journal of Materials Processing, 41-4 (1994), 381-398
  3. I. S. Kim, A. Basu and E. Siores, Mathematical models for control of weld bead penetration in the GMAW process, International Journal of Advanced Manufacturing Technology, 12-6 (1996), 393-401
  4. P. S. Rao, O. P. Gupta, S. N. Murty, and A. B. Rao, Effect of process parameters and mathematical model for the prediction of bead geometry in pulsed GMA welding, International Journal of Advanced Manufacturing Technology, 45-5 (2009), 496-505
  5. David E. Gldberg, Genetic Algorithms in Search, Optimization and Machine Learning, Addison-Wesley, (1989)
  6. H. S. Park, T. H. Kim, and S. H. Rhee, Optimization of Welding Parameters for Resistance Spot Welding of TRIP Steel Using Response Surface Methodology, Journal of KWS, 21(2) (2003), 76-81 (in Korean)
  7. J. Y. Lee, J. W. Kim, and C. H. Kim, A study on the selection of fillet weld conditions by considering the tack welds, Journal of KWS, 24(5) (2006), 377-384, (in Korean)
  8. T. S. Li, C. T. Su, T. L. Chiang, Applying robust multiresponse quality engineering for parameter selection using a novel neural-genetic algorithm, Computers in Industry, 50-1 (2003), 113-122 https://doi.org/10.1016/S0166-3615(02)00140-9
  9. H.Nomura, J.E.Middle, Development and Application of Arc Sensor Control with a High Speed Rotating Arc Process, Sensors and Control Systems in Arc Welding, 28(1994), 247-256
  10. Dong-Chul Kim, Tae-Won Chang, Dong-Ryeol Yoon, Tae- Wuk Woo, Chang-Gook Park, Tandem Electrogas Welding of Higher-strength Hull Structural Steel, Proceeding of KWJS, (2006) 75-76 (in Korean)