• 한국운동역학회지
• /
• 제16권1호
• /
• pp.1-10
• /
• 2006

The purpose of this study was to identify critical parameters of a putting performance using jerk cost function. Jerk is the time rate of change of acceleration and it has been suggested that a skilled performance is characterized by decreased jerk magnitude. Four elite golfers($handicap{\leq}2$) and 4 novice golfers participated in this study for the comparison. The 3D kinematic data were collected for each subject performing 5 trials of putts for each of these distances (random order): 1m, 3m, 5m The putting stroke was divided into 3 phases such as back swing. down swing and follow-through. In this study, it was assumed that there exist smoothness difference between elite and novice golfers during putting. The distance and jerk-cost function of Putting stroke for each phase were analyzed Results showed that there was a significant difference in jerk cost function at putter toe (at media-lateral direction) and at the center of mass between two groups by increasing putting distance. From these it could be concluded that jerk can be used as a kinematic parameter for distinguishing elite and novice golfers.

• International Journal of Control, Automation, and Systems
• /
• 제5권6호
• /
• pp.614-620
• /
• 2007

This paper considers vibration suppression of a mechanical transfer system, where the work is connected with the hand flexibly. We adopt the idea of jerk reduction of the hand. From the equation of motion, we first derive a state equation including the jerk and acceleration of the hand, but excluding the displacement and velocity of the work. Then, we design optimal state feedback for a suitable cost function, and show by simulation that jerk reduction of the hand is effective for vibration suppression of the work and improvement of the settling time. Since state feedback including the jerk and acceleration is not practical, we propose a computation method for optimal feedback using displacements and velocities in the state only.

• 한국운동역학회지
• /
• 제24권4호
• /
• pp.349-357
• /
• 2014

The purpose of this study was to examine the differences in the performance of dancing motions depending on the level of skill by investigating pulmonary functions, ground reaction force, and jerk cost. The subjects of this study were 12 professional dancers (career: 16 yrs) and 12 amateur dancers (career: 9 yrs) who had similar physical conditions. We selected four motion phases which included the diagonal line motion, the deep flexion motion, the breath motion, and the turn motion with one leg after a small step walking motion, with Goodguri Jangdan. In the experiment, 6 infrared cameras were installed in order to analyze the value of the jerk costs and the force plate form. Finally, we measured the pulmonary functions of the subjects. For data analysis, independent t-tests according to each event, were carried out in the data processing. According to the results of FVC % Predicted, the professional dancers showed greater lung capacities than the amateur dancers, indicating that the level of dancing skill influences lung capacity. Based on the result of the balance test, the professional dancers used more vertical power than did the amateur dancers when performing maximal flexion motion. The professional dancers used a propulsive force of pushing their body forward by keeping the center of body higher while the amateur dancers used a braking power by keeping their bodies backward. When performing medial-lateral movements, the amateur dancers were less stable than the professional dancers. There were no differences in values of jerk costs between the amateur dancers and the professional dancers.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.185-190
• /
• 2007

The purpose of this study was to investigate the effects that breathing, thoracic and abdominal, had on the smoothness while performing ballet pour de bra. Five skilled ballet dancers(age: $24{\pm}1$, height: $163.4{\pm}2.88$, weight: $44.4{\pm}1.34$) with experience of over 10 years participated in this study. Each participant performed the ballet movement three times with abdominal respiration and with thoracic respiration. The kinematic data was recorded at 60 Hz with three digital cameras (Sony VX-2100). The pour de bra movement consists of two phases, up and down. The up phase is defined as the movement from the en bas through the en avant to the en haut. The down phase is defined as the movement from the en haut through the $\grave{a}$ la seconde to the en bas. During these two phases the Jerk Cost (JC) factor was calculated for the shoulder, elbow and wrist to quantify the smoothness. The group who performed the movement while abdominal respiration had a lower JC factor and so it was concluded that while abdominal respiration the smoothness of the movement was increased as opposed to the thoracic respiration.

• 한국운동역학회지
• /
• 제29권2호
• /
• pp.53-60
• /
• 2019

Objective: The purpose of this study was to investigate the differences of smoothness and coordination of the fingers and upper extremities between skilled and non-skilled players during receiving the basketball. Method: Ten male recreational basketball players (age: $23.2{\pm}2.7yrs.$, career: $8.6{\pm}1.6yrs.$, height: $177.3{\pm}6.0$, weight: $72.9{\pm}8.5kg$) careering over five years and ten non-skilled males (age: $27.3{\pm}1.5yrs.$, height: $173.7{\pm}5.6$, weight: $73.2{\pm}12.6kg$) were participated in this study. Then, participants were asked to perform basketball receiving movement for ten times. The receiving movements were recorded by eight infrared cameras (Oqus 300, Qualisys, Sweden). The collected rad data were calculated to duration of basketball receiving, Jerk-Cost, CRP and CRP variability. Results: The CRP of MCP-Wr, Wr-El in skilled group were greater than non-skilled group (p<.05). The CRP variability of El-Sh in non-skilled group was greater than skilled group (p<.05). Conclusion: These results suggest that skilled players perform more effective movement for impact absorption from the basketball. Moreover, the skilled players have consistent movement patterns during basketball performance. Lastly, it is important to train finger sensation and cognitive ability of thrown basketball from the passer.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1757-1762
• /
• 2007

Recently, the demand for the low cost power conversion equipment is rapidly increased. To develop this three phase voltage source inverter, optimum power conversion equipment to system is designed. The optimum operation method to minimize the power loss also satisfy the life time of the power electronics that is request in the present industry. In this paper, the efficient operating method to change of the acceleration, jerk, and switching frequency in the interval of acceleration is selected to optimize the power loss and life time of the power electronics by using the elevator model. So, we proposed the method that 50[A] rating power electronics is adopted in 9[kW] load.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.25.3-25
• /
• 2001

This paper describes a control method of a robot cooperating with a human. A task in which a robot and a human move an object cooperatively is considered. To develop the force controller of the robot, the characteristics of human arm are investigated. The arm is forced to move along a trajectory in the experiment and the exerted force and the displacement are analyzed, It is found the force characteristics of the human arm is regarded as an optimal damper with minimizing a cost function. Then, the model is implemented to a robot and the cooperation of the robot and a human operator is examined. The effectiveness of the derived model is investigated and the experimental results show that the human moves the object supported by the robot with a minimum jerk trajectory.

• 감성과학
• /
• 제13권4호
• /
• pp.613-620
• /
• 2010

본 연구의 목적은 차량 통제 변인과 동작의 부드러움 변인을 이용하여 동시 과제 수행이 운전 수행 능력에 미치는 영향을 정량적으로 제시하는 것이다. 1~2년의 운전 경력을 가진 피험자 20명이 실험에 참여하였다. 피험자는 동작분석을 위해 상지(shoulder, elbow, wrist) 및 하지(knee, ankle, toe)에 9개의 마커를 부착한 후, 운전 시뮬레이터를 이용하여 80km/hr로 주행하는 선행 차량과 30m의 간격을 유지하며 직선 주행하도록 하였다. 동시과제는 문자 메시지 보내기와 네비게이션 검색으로 선정하였다. 실험 시간은 2분으로 운전 시작 후 1분은 운전만을, 다음 1분은 운전과 동시과제를 함께 실시하도록 하였고, 각각 운전구간과 동시과제구간으로 정의하였다. 차간거리(Anterior-Posterior Coefficient of Variation, APCV) 및 차선이격거리의 분산계수(Medial-Lateral Coefficient of variation, MLCV)와 저크비용함수(Jerk-cost function, JC)를 이용하여 운전 수행 능력을 평가하였다. APCV는 운전구간에 비해 운전 중 네비게이션 검색 시 222.1% 증가하였다. MLCV는 문자 메시지 전송 과제를 수행할 경우, 318.2%, 네비게이션 검색 과제를 수행할 경우 309.4%가 증가하였다. JC는 운전구간에 비해 동시과제 수행 시, 팔꿈치, 무릎, 발목, 발가락에서 유의하게 증가하였고, 하지마커 전체의 평균값은 문자과제 수행 시 218.2%, 네비게이션 과제 수행 시 294.7%가 증가하였다. 운전 중 동시과제의 수행은 JC를 증가시켜 운전자의 동작의 부드러움을 감소시키고, APCV와 MLCV를 증가시켜 차량의 횡적 종적 통제를 어렵게 한다고 결론 내릴 수 있다.

• 한국운동역학회지
• /
• 제21권4호
• /
• pp.405-410
• /
• 2011

The purpose of this study was to compare the differences in kinematic variables and grip forces among professionals(PG), amateurs(AG), and novice group(NG) during golf putting. The participants consisted of 3 groups based on their playing ability: 8 professional golfers (handicap<5), 8 amateurs (handicap<18) and 8 novice. Each subject attempted 2.1m putts from the hole. 3D motion analysis system(Motion analysis Corp., USA) with 6 high speed cameras and grip force measurement system(Kim et al., 2007) were used to acquired kinematic and force data, respectively. To compare differences among groups, joint angles of upper limbs, trajectory and smoothness by jerk cost function(JC) of putter head and grip forces were used in this study. Results showed that there were significant differences among groups in most of variables such as joint angles, trajectory & smoothness of putter head, and distribution of grip force in both hands. In brief, we confirmed that putting stroke in PG was more accurate and smooth than that in other groups, especially NG, due to their well-controlled upper limbs and keeping grip forces constant in both hands. It can be concluded that due to skilled levels, fundamental differences of putting movement could be identified and these differences might be helpful for improving one's putting skills.

• 한국정밀공학회지
• /
• 제29권10호
• /
• pp.1110-1118
• /
• 2012

In this study, for reducing the residual vibration in high speed motion control stage, an improved 5th order polynomial motion profile was developed. When a stage is moving, the current through the motor coils has the same profile of input motion profile of acceleration, therefore the characteristics of the acceleration input profile directly affect on the performance of the amplifier that includes the current control loop. Commonly low cost amplifier and motor has a narrow current control bandwidth, therefore the proposed algorithm was designed based on this practical constraint. Simulation and experimental results showed that the proposed algorithm clearly has low residual vibration characteristics than conventional 5th order polynomial motion profile on the same drive condition.