• Journal of the Korea Furniture Society
• /
• v.23 no.2
• /
• pp.214-221
• /
• 2012

Sustainable energy consumption and increasing $CO_2$ emissions stimulate Eco-friendly industry. Wood has positive various properties as alternative energy such as solar, wind and water. Wood provide lumber, pallet, paper, pulp and fuel through production process. Even Korea republic has 63.7% of forest rates, weather condition makes low forestry production capacity. For utilization of domestic small diameter log needs study mechanical properties. In this study, various properties tested on domestic Japanese Larch small diameter lumbers and make mechanical properties table for allowable stress calculation. Result of compressive test, allowable compressive stress is 13 MPa. Allowable bending stress is 12 MPa.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.42-55
• /
• 1984

The direction of scientific researches on tree improvement and forest management in several universities and research institutes in Japan can be summarized as follows: They put a great emphasis on sugi, Cryptomeria japonica and cypress, Chamaecyparus oblusa which are two major conifer species largerly planted in the Japanese forestry. In the research of sugi, a great concern has been made in evaluating inheritance of forest tree, quantitative characters and genetic parameter of growth, and in breeding for resistance to diseases and insects and to all the natural calamities. Interaction between environmental conditions and genetic nature of tree can be concerned factors in relation with forest damage, together with silvicultural conditions and pest infestation. Selfing hybrids of $F_1$ made from crossing twisted-leaf sugi, defomity leaf type and midori sugi, normal leaf type segregated the normal needle, twisted needle, green leaf and albino leaf type. It seemed that separation of many defomity individuals can be governed by two dominant complementary genes and from the near loci of which it was detected lethal genes. 52% of Japanese forestry is occupied by the small forest landowners like Korean forestry. This made difficulty for forest improvement such as progressive afforestation and for capital accumulation form forestry. The Forest Corporation was established at first in 1959 to aming at productive forestry structure and forest management, and afforestation. For these purpose, 35 Forest Corporations are at moment operating throughout Japan. However, investment in forestry business becomes less attractive since the wage in forest production duction increased in higher trend. than timber price. Therefore, an artifical afforestation becomes yearly decreased. At present. the self-sufficient rate of timber production in Japan is about 35%, and so a great effort is being made to increase self-sufficient rate of timber production.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.497-504
• /
• 2009

The characteristic changes in weight, moisture content, and dimension at the early adsorptiondesorption stage of PEG-treated Korean pine (Pinus koraiensis), Japanese larch (Larix kaempferi), mongolian oak (Quercus mongolica) and sargent cherry (Prunus sargentii) woods were investigated. The wood samples were treated with PEG 1000, 2000 and 4000, and conditioned at the relative 98%, 65% and 20% for humidities of one week. The weight of Korean pine, Japanese larch and sargent cherry woods treated with PEG 1000 and 2000 during the adsorption-desorption was significantly changed, but mongolian oak was slightly changed. Moisture content was highly Moisture content was highly fluctuated by the change of relative humidity in the three species except oak wood. Although the weight of PEG-treated wood; however, changes in dimension could be prevented by PEG treatment in all species tested.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.125-131
• /
• 2011

The characteristics of radio-frequency/vacuum drying Japanese larch boxed heart round logs with 150 mm and 210 mm in diameter and 2,500 mm in length, subjected to compressive loading, after the pretreatment of kerf were investigated. The results of this study were as the follows: The drying time of about 120 hours~130 hours was needed from green to about 15 percent of moisture content. The gradient of final moisture content for all specimens was very gentle in both longitudinal and transverse directions owing to dielectric heating. The surface checks seriously occurred although the occurrence extent of surface check for the kerfed specimens was slight compared with that for the control specimens because drying stress was relieved by kerf. The occurrence of surface checks for the L-specimen was more serious than that for the S-specimen.

• Research in Plant Disease
• /
• v.16 no.3
• /
• pp.219-223
• /
• 2010

Recently, the oak wilt diseases especially on Quercus mongolica, have been increasing in various districts of Korea. A collection of 38 strains of the oak wilt pathogen Raffaelea qeurcus-mongolicae and R. quecivora isolated from Quercus spp. in Korea and Japan was characterized by $\beta$-tubulin gene sequence and randomly amplified polymorphic DNA (RAPD) analysis. In cluster analysis based on $\beta$-tubulin gene sequence the strains were divided into 4 clusters, of which clusters 2 and 4 were composed of Japanese strains except for one Korean strain. RAPD analysis showed that they were also effectively differentiated by a strong RAPD fragments. On the basis of the two genetic analysis, significant differences were detected between Korean strains and Japanese strains.

• Journal of Forest and Environmental Science
• /
• v.27 no.2
• /
• pp.113-118
• /
• 2011

This study was carried out to analyze annual diameter growth characteristics for major 11 tree species using the data for Gangwon province of the National Forest Resources Inventory in 2007. The annual diameter growth of coniferous species was 5.02 mm, 4.70 mm, and 3.90 mm in Korean white pine, Japanese larch, and Korean red pine, respectively. In growths of the deciduous trees, dogwood, basswood, and cork oak had 3.55 mm, 3.48 mm and 3.01 mm, respectively. Average of the annual diameter growths for all species was 3.38 mm. The relationship between diameter growth and age class showed that the growth rate decreased for all species as age increased. The age class II had the highest annual diameter rate. In relation of the stand density(trees per hectare) and diameter growth, the diameter growth tended to decrease as the stand density increased for most species, especially Korean white pine, cork oak, and basswood. Finally age had the highest value in the correlation coefficients between measurement factor and growth rate regardless of species.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.4
• /
• pp.409-418
• /
• 2017

This work attempted to manufacture glued-laminated timber (Glulam) bonded with melamine-urea-formaldehyde (MUF) resin adhesives at various melamine contents from 20% to 50% under high frequency (HF) heating for a very short time. Two preparation methods were employed to prepare MUF resin adhesives with different melamine contents: one-batch method of synthesizing MUF resins in a single batch, and two-batch method of mixing urea-formaldehyde (UF) resin with melamine-formaldehyde (MF) resin that had been synthesized separately. As the melamine content increased, the gelation time and peak temperature of MUF resins decreased. The adhesion performance of plywood showed that the one-batch MUF resin adhesive with 50% melamine content only satisfied the standard requirement of water resistance. Thus, the one-batch MUF resin adhesive with 50% melamine content was applied for bonding wood lamina from four softwood species such as Japanese larch, Korean red pine, Korean pine and Japanese cedar to manufacture Glulam under HF heating. All Glulam samples bonded with the one-batch MUF resin adhesives with 50% melamine content except those from Korean Red Pine satisfied the requirement in water soaking or boiling water delamination test as an exterior grade Glulam. The presence of rosin in Korean Red Pine was believed to be responsible for its poor adhesion. These results showed that the one-batch MUF resin adhesives with 50% melamine content provided acceptable water resistance with exterior grade Glulam manufactured under HF heating.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.753-761
• /
• 2017

The heartwood (HW) of Japanese cedar (Cryptomeria japonica) has usually a reddish color. But some trees have black-colored heartwood (BHW). BHW of Japanese cedar has a low commercial value because of the appearance. Therefore, in this study, a comparative analysis was conducted to evaluate the differences in the physical, mechanical, and inorganic element properties, and decay resistance of red-colored heartwood tree (RHW) and BHW. The physical properties showed significant difference between sapwood (SW) and HW, but there was no significant difference between RHW and BHW. From the results of mechanical properties, no significant difference was recognized in SW of RHW, HW of RHW, SW of BHW, and HW of BHW. There were decay resistance differences between RHW and BHW in HW, and between HW and SW in both RHW and BHW, respectively. The magnesium (Mg), potassium (K), and calcium (Ca) contents had significant differences between SW and HW in both RHW and BHW. In this present study, the decay resistances and the contents of Mg and K were higher in HW than in SW both for RHW and BHW, while these measurements were lower in RHW than in BHW. Therefore, BHW was considered to be worthy as a high-quality material as RHW.

• Journal of Ecology and Environment
• /
• v.47 no.4
• /
• pp.241-249
• /
• 2023

Background: This study analyzed the drought responses of five forest tree species grown in Korean peninsula, Korean fir Abies koreana (Ak), eastern white pine Pinus strobus (Ps), keyaki Zelkova serrata (Zs), tulip tree Liriodendron tulipifera (Lt), and Japanese elm Ulmus japonica (Uj). Physiological (chlorophyll, root collar diameter [RCD]) and biochemical responses (non-structural carbohydrates, proline, lipid peroxidase and abscisic acid [ABA]) of the plants grown under mild (MD) and severe drought (SD) were compared. Results: In this study, three soil moisture regimes: control (100% precipitation), MD (60% reduction in precipitation) and SD (20% reduction in precipitation) were applied. Soil moisture content showed high water content in control site compared to MD and SD. A decline in RCD was found for Korean fir, keyaki, and tulip plants, with eastern white pine and Japanese elm showing no significant decline to the prolonged drought exposure (both MD and SD). Total chlorophyll showed a significant decline in Korean fir and tulip, with the sugar levels indicating a significant increase in Korean fir and keyaki species under SD compared to control plants. Non-significant decline in sugar level was noted for eastern white pine and Japanese elm. High accumulation of ABA, malondealdehyde and proline was noted in Korean fir, tulip, and keyaki under SD compared to control. Signs of tree mortality was only observed in Korean fir under MD (38%) and SD (43%). Conclusions: The observed findings indicate the drought responses of five tree species. The majority of the morpho-physiological (especially mortality) and biochemical variables assessed in our study indicate superior long-term drought resistance of Ps and Uj compared to the highly sensitive Ak, and moderately sensitive Lt and Zs. The results provided will help species selection for afforestation programs and establishment of sustainable forests, especially of drought-tolerant species, under increased frequency and intensity of spring and summer droughts.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.306-309
• /
• 2000

The black pine bast scale (BPBS), Matsucoccus thunbergianae, causes serious damage to Japanese black pine forests in the southern part of Korean peninsula. After first detection of its damage in Kohung, Chonnam Province in 1963, the distribution has been expanding gradually year by year. Since 1983, extensive surveys for BPBS distributions have been carried out by Korea Forest Research Institute. We used cumulative data for BPBS distribution and analyzed the dispersal pattern. We divided expansions into three directions such as north along the west coast, northeast towards the inland, and east along the south coast. In the direction of northeast the dispersal rate was approximately 4.3km per year in dense forests of Japanese black pine, but it slowed down since the early 1990s. The annual dispersal rates were approximately 5.9 and 3.3km in north and east directions, respectively.