• 한국안전학회지
• /
• 제13권4호
• /
• pp.96-101
• /
• 1998

J-R curve tests were performed on 1T compact specimens of SA516 Gr. 70 carbon steels under reverse cyclic loading. A Direct-Current Potential Drop (DCPD) method, one of the nondestructive techniques to detect flaw of structure, is being increasingly used for monitoring crack initiation and stable crack growth in typical fracture mechanics specimens for J-R testing. In many aspects this method is simpler than the unloading compliance method. The objective of this paper is to evaluate the J-R Curve according to the crack length measurement techniques under reverse cyclic loading. In order to prove the reliability and repeatability of the DCPD method, the crack length measured by using DCPD method was compared to one determined from unloading compliance. Consequently, this DCPD method correlated well with J-R curves and crack extension measurements determined from unloading compliance method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.98-100
• /
• 1995

This paper deals with development of high torque and high accurate stepping motor and control system which is adopted heavy equipment engine speed control. In the process of development, only pure domestic technics is involved, all the parts are supplied in domestic industries, and successfully accomplished to mass production. In order to confirm product liability, circumferential test,such as vibration test impact test,thermal test,and field test are thoroughly fulfilled.

• 대한수학회보
• /
• 제57권6호
• /
• pp.1541-1565
• /
• 2020

Let f be a meromorphic function of finite order ρ with few poles in the sense S_λ(r, f) := O(r^λ+ε) + S(r, f), where λ < ρ and ε ∈ (0, ρ - λ), and let g(f) := Σ^k_j=1b_j(z)f^(k_j)(z + c_j) be a linear delay-differential polynomial of f with small meromorphic coefficients b_j in the sense S_λ(r, f). The zero distribution of fⁿ(g(f))^s - b₀ is considered in this paper, where b₀ is a small function in the sense S_λ(r, f).

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1796-1808
• /
• 1997

In order to perform leak-before-break design of nuclear piping systems and integrity evaluation of reactor vessels, full stress-strain curves and fracture resistance(J-R) curves are required. However it is time-consuming and expensive to obtain J-R curves experimentally. To resolve these problems, three different methods for predicting J-R curves from tensile data were proposed by the authors previously. The objective of this paper is to develop a computer program based on those J-R curve prediction methods. The program consists of two major parts ; the main program part for the J-R curve prediction and the database part. Several case studies were performed to verify the program, and it was shown that the predicted results were, in general, in good agreement with the experimental ones.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1786-1795
• /
• 1997

In order to perform leak-before-break design of nuclear piping systems and integrity evaluation of reactor vessels, full stress-strain curves and fracture resistance (J-R) curves are required. However it is time-consuming and expensive to obtain J-R curves experimentally. The objective of this paper is to modify two J-R curve prediction methods previously proposed by the authors and to propose an additional J-R curve prediction method for nuclear piping materials. In the first method which is based on the elastic-plastic finite element analysis, a blunting region handling procedure is added to the existing method. In the second method which is based on the empirical equation, a revised general equation is proposed to apply to both carbon steel and stainless steel. Finally, in the third method, both full stress-strain curve and finite element analysis results are used for J-R curve prediction. A good agreement between the predicted results based on the proposed methods and the experimental ones is obtained.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.476-484
• /
• 2002

The aim of this study is to investigate the ductile fracture behavior under mixed mode (I/II) loading using SA533B pressure vessel steel. Anti-symmetric 4-point (AS4P) bending tests were performed to obtain the J-R curves under two different mixed mode (I/II) loadings. In addition, finite element analysis using Rousselier Ductile Damage Theory was carried out to predict the J-R curves under mixed mode (I/II) loadings. In conclusions, the J-R curves under. Mixed Mode (I/II) loading were located between those of Mode I and Mode II loading. When the mixity of mixed mode (I/II) loading was high, the J-R curve of mixed mode (I/II) loading approached that of pure mode I loading after some amount of crack propagation. In contrast with the above fact, if the mixity was low, the J-R curve took after that of pure mode II loading. Finally, it was found that the predicted J-R curves made a good agreement with the test data through the tuning procedures of $\beta$ values at the different mixed mode (I/II) loading.

• Kyungpook Mathematical Journal
• /
• 제59권4호
• /
• pp.603-615
• /
• 2019

Let R be an associative unital ring with an endomorphism α and α-derivation δ. The constant products of elements in Ore extension rings, when the coefficient ring is reversible, is investigated. We show that if f(x) = ∑ⁿ_i=0 a_ixⁱ and g(x) = ∑^m_j=0 b_jx^j be nonzero elements in Ore extension ring R[x; α, δ] such that g(x)f(x) = c ∈ R, then there exist non-zero elements r, a ∈ R such that rf(x) = ac, when R is an (α, δ)-compatible ring which is reversible. Among applications, we give an exact characterization of the unit elements in R[x; α, δ], when the coeficient ring R is (α, δ)-compatible. Furthermore, it is shown that if R is a weakly 2-primal ring which is (α, δ)-compatible, then J(R[x; α, δ]) = N iℓ(R)[x; α, δ]. Some other applications and examples of rings with this property are given, with an emphasis on certain classes of NI rings. As a consequence we obtain generalizations of the many results in the literature. As the final part of the paper we construct examples of rings that explain the limitations of the results obtained and support our main results.

• 대한수학회지
• /
• 제52권4호
• /
• pp.839-851
• /
• 2015

A *-ring R is called (strongly) *-clean if every element of R is the sum of a projection and a unit (which commute with each other). In this note, some properties of *-clean rings are considered. In particular, a new class of *-clean rings which called strongly ${\pi}$-*-regular are introduced. It is shown that R is strongly ${\pi}$-*-regular if and only if R is ${\pi}$-regular and every idempotent of R is a projection if and only if R/J(R) is strongly regular with J(R) nil, and every idempotent of R/J(R) is lifted to a central projection of R. In addition, the stable range conditions of *-clean rings are discussed, and equivalent conditions among *-rings related to *-cleanness are obtained.

• 대한수학회논문집
• /
• 제35권4호
• /
• pp.1045-1056
• /
• 2020

Let R be a commutative ring with unity. The extension of annihilating-ideal graph of R, $^{\bar{\mathbb{AG}}}$(R), is the graph whose vertices are nonzero annihilating ideals of R and two distinct vertices I and J are adjacent if and only if there exist n, m ∈ ℕ such that IⁿJ^m = (0) with Iⁿ, J^m ≠ (0). First, we differentiate when 𝔸𝔾(R) and $^{\bar{\mathbb{AG}}}$(R) coincide. Then, we have characterized the diameter and the girth of $^{\bar{\mathbb{AG}}}$(R) when R is a finite direct products of rings. Moreover, we show that $^{\bar{\mathbb{AG}}}$(R) contains a cycle, if $^{\bar{\mathbb{AG}}}$(R) ≠ 𝔸𝔾(R).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2182-2184
• /
• 2002

In this paper we describe a prototype Control Rod Control System(CRCS). The CRCS controls the motion of the full length rod drive mechanisms in response to signals from the Reactor Operator and the Reactor Control System. Each mechanism belongs to either Shutdown Banks or Control Banks. The CRCS also provides information regarding the rod motion, rod position, and the status of the Rod Control System. The prototype CRCS will be used to obtain the requirements for detailed design of a full-scale CRCS.