• Nutrition Research and Practice
• /
• v.10 no.2
• /
• pp.212-220
• /
• 2016

BACKGROUND/OBJECTIVES: Curcumin, an active ingredient in turmeric, is highly consumed in South Asia. However, curry that contains turmeric as its main spice might be the major source of curcumin in most other countries. Although curcumin consumption is not as high in these countries as South Asia, the regular consumption of curcumin may provide a significant health-beneficial effect. This study evaluated whether the moderate consumption of curry can affect blood glucose and lipid levels that become dysregulated with age. SUBJECTS/METHODS: This study used data obtained from the Korea National Health and Nutrition Examination Survey, conducted from 2012 to 2013, to assess curry consumption frequency as well as blood glucose and blood lipid levels. The levels of blood glucose and lipids were subdivided by age, sex, and body mass index, and compared according to the curry consumption level. The estimates in each subgroup were further adjusted for potential confounding factors, including the diagnosis of diseases, physical activity, and smoking. RESULTS: After adjusting for the above confounding factors, the blood glucose and triglyceride levels were significantly lower in the moderate curry consumption group compared to the low curry consumption group, both in older (> 45) male and younger (30 to 44) female overweight individuals who have high blood glucose and triglyceride levels. CONCLUSIONS: These results suggest that curcumin consumption, in an ordinary diet, can have health-beneficial effects, including being helpful in maintaining blood glucose and triglyceride levels that become dysregulated with age. The results should be further confirmed in future studies.

• Journal of Food Hygiene and Safety
• /
• v.16 no.1
• /
• pp.37-40
• /
• 2001

Recently, consumer's demand for natural preservatives is increasing because of residual toxicity, mutagenicity and etc. of synthetic preservatives and th study of natural preservatives is being done. In this study, antimicrobial activity of spices was investigated. Fungi occurred in bread and d noodle without mustard after 3days and 4days, respectively. However, they didn't occured in bread and noodle with mustard ball. Temperature of the water used in mixing-up mustard powder didn't affect antimicrobial activity of mustard. Fungi occurred in bread with cinnamon, Japanese pepper or horseradish after 4days, 4days or 6days, respectively. However, there wasn't the occurrence of fungi in bread with mustard after 8days, yet. Mustard and horseradish of extracts by water of spices had a strong antimicrobial activity. But the extracts by ethanol had 1ow antimicrobial activity.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.208-222
• /
• 2015

For the performance-efficient integration of IPs on an SoC utilizing heterochronous multi-clock domains, we propose a synchronization scheme that causes low latency overhead when data are crossing clock boundaries. The proposed synchronization scheme is composed of a clock predictor and a synchronizer. The clock predictor of a sender clock domain produces a predicted clock that is used in a receiver clock domain to detect possible synchronization failures in advance. When the possible synchronization failures are detected, a synchronizer at the receiver delays data-capture times to avoid the possible synchronization failures. From the simulation of the proposed scheme through SPICE modeling using a Chartered $0.18{\mu}m$ CMOS process, we verified the functionalities and timing behavior of the clock predictor and the synchronizer. The simulation results show that the clock predictor produces a predicted clock before a synchronization failure, and the synchronizer samples data correctly using the predicted clock.

• Journal of Biomedical Engineering Research
• /
• v.29 no.5
• /
• pp.392-399
• /
• 2008

Thin-film transistor (TFT) arrays for an x-ray detector require quite different design concept from that of the conventional active-matrix liquid crystal devices (AM-LCDs). In this paper anew design of TFT array which uses only SiNx for passivation layer is described to meet the detector performance and the product availability simultaneously. For the purpose of optimizing the design parameters of the TFT array, a Spice simulation was performed. As a result, some parameters, such as the TFT width, the data line capacitance, and the storage capacitance, were able to be fixed. The other parameters were decided within a permissible range of the TFT process especially the photolithography process and the wet etch process. Then we adapted the TFT array which had been produced by the proposed design to our prototype model (FDXD-1417 and evaluated it clinically by comparing with a commercial model (EPEX, Hologic, Beford, USA). The results say that our prototype model is slightly better than EPEX system in chest PA images. So we can prove the technical usefulness and the commercial values of the proposed TFT design.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2148-2150
• /
• 1998

This paper proposes a constant frequency controlled zero voltage switching method that can reduce switching losses caused by emf on inductance in DC motor. The zero voltage switching method is used more than a zero current switching method because of reducing switching losses by capacitance of depletion region of MOSFET. To simplify the controller circuit, we propose constant frequency controlled zero voltage switching method in the paper. The control method is more stable than a variable frequency control method because it can optimize bandwidth of a closed-loop and reactances. Therefore, we construct a constant frequency controlled zero voltage switching converter and improve zero switching losses in high switching frequency. In the process, we can control low-losses in full range on variable voltage and load. We simulate the proposed converter with P-SPICE and compare results obtained through the experiment.

• Smart Structures and Systems
• /
• v.14 no.2
• /
• pp.247-266
• /
• 2014

Conventional cantilevered piezoelectric energy harvesters (PEHs) are usually fabricated with continuous electrode configuration (CEC), which suffers from the electrical cancellation at higher vibration modes. Though previous research pointed out that the segmented electrode configuration (SEC) can address this issue, a comprehensive evaluation of the PEH with SEC has yet been reported. With the consideration of delivering power to a common load, the AC outputs from all segmented electrode pairs should be rectified to DC outputs separately. In such case, theoretical formulation for power estimation becomes challenging. This paper proposes a method based on equivalent circuit model (ECM) and circuit simulation to evaluate the performance of the PEH with SEC. First, the parameters of the multi-mode ECM are identified from theoretical analysis. The ECM is then established in SPICE software and validated by the theoretical model and finite element method (FEM) with resistive loads. Subsequently, the optimal performances with SEC and CEC are compared considering the practical DC interface circuit. A comprehensive evaluation of the advantageous performance with SEC is provided for the first time. The results demonstrate the feasibility of using SEC as a simple and effective means to improve the performance of a cantilevered PEH at a higher mode.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.285-290
• /
• 2010

In this paper, a dynamic range(DR) extension technique based on a 3-transistor active pixel sensor(APS) and dual image sampling is proposed. The feature of the proposed APS is that the APS uses two or more photodiodes with different sensitivities, such as a high-sensitivity photodiode and a low-sensitivity photodiode. Compared with previously proposed wide DR(WDR) APS, the proposed approach has several advantages, such as no-external equipments or signal processing, no-additional time-requirement for additional charge accumulation, simple operation and adjustable DR extension by controlling parasitic capacitance and sensitivity of two photodiodes. Approximately 16 dB of DR extension was evaluated from the simulation for the situation of 10 times of sensitivity difference and the same size of parasitic capacitance between those two photodiodes.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.3
• /
• pp.373-379
• /
• 2019

Nowadays, the IoT portable electronic devices have become more useful and diverse, so they require various supply voltage levels to operate. This paper presents a DC-DC buck converter with pulse width modulation (PWM) for portable electronic devices. The proposed step-down DC-DC converter consists of passive elements such as capacitors, inductors, and resistors and an integrated chip (IC) for signal control to reduce power consumption and improves ripple voltage with the resolution. The proposed DC-DC converter is simulated and analyzed in PSPICE circuit design platform, and implemented on the prototype PCB board with a Texas Instruments LM5165 IC. The proposed buck converter is showed 92.6% of peak efficiency including a load current range of 4-10 mA, 3.29 mV of the voltage ripple at 5 V output voltage for the supply voltage 12 V. Measured and Simulated power efficiency are made good agreement with each other.

• Journal of Fashion Business
• /
• v.28 no.1
• /
• pp.51-67
• /
• 2024

Recently, as the "Kidult" culture has become the culture of life, the vintage fashion doll market is rapidly emerging. This change, coupled with a tendency to cherish childhood memories among adults, shows a phenomenon that vintage dolls are gaining popularity. This study explored the possibility of creative fashion doll clothing design, aiming to satisfy consumers' more diverse and unique emotional needs and provide new perspectives and inspiration to the doll fashion industry and the fashion doll industry. Therefore, this study attempted to propose a fashion doll costume design using the Y2K fashion style that is currently popular. Based on publications and prior research considerations, the Y2K fashion style could be categorized into four main styles: 'Future Technology', 'The Matrix', 'Millennium Spice Girl', and 'Harajuku'. Based on characteristics of these four styles, this study designed and produced eight stylish doll costumes incorporating the Y2K style under themes of 'Ex Machina', 'Digital Warrior', 'Rebelious Sugar', and 'Harajuku Dopamine'. This can inspire fashion doll costume design and production based on trendy styles. This study can be a useful foundation for presenting more diverse directions for fashion doll costume design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.2
• /
• pp.114-121
• /
• 2001

A circuit model for active-controlled field emitter array(ACFEA) as an electron source of active-controlled field emission display(ACFED) has been proposed. The ACFEA with hydrogenated amorphous silicon thin-film transistor(a-Si:H TFT) and Spindt-type molibdenum tips (Spindt-Mo FEA) has been fabricated monolithically on the same glass. A-Si:H TFT is used as a control device of field emitters, resulting in stabilizing emission current and lowering driving voltage. The basic model parameters extracted from the electrical characteristics of the fabricated a-Si:H TFT and Spindt-Mo FEA were implemented into the ACFEA model with a circuit simulator SPICE. The accuracy of the equivalent circuit model was verified by comparing the simulated results with the measured one through DC analysis of the ACFEA. The transient analysis of the ACFEA showed that the gate capacitance of FEA along with the drivability of TFT strongly affected the response time. With the fabricated ACFEA, we obtained a response time of 15$mutextrm{s}$, which was enough to make 4bit/color gray scale with the pulse width modulation (PWM).