• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.3976-3982
• /
• 2013

This paper presents a temperature analysis of the chaotic behavior in the voltage controlled CMOS chaotic circuit. The circuit is based on a simple nonlinear function block which is needed for chaotic signal generation. It consists of a NFB (nonlinear function block), a level shifter and non-overlapping two-phase clock for sample and hold. By SPICE simulation, chaotic dynamics such as frequency spectra and bifurcations according to the temperature variations were analyzed. And, it was showed that the circuit can generate discrete chaotic signals within control voltage in the range from 1.2 V to 2.3 V in a specific temperature condition of $25^{\circ}C$.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.4
• /
• pp.275-281
• /
• 2003

A new neural oscillator has been designed and fabricated in an 0.5 ${\mu}{\textrm}{m}$ double poly CMOS technology. The proposed neural oscillator consists of a nonlinear variable resistor with negative resistance as well as simple transconductors and capacitors. The variable negative resistor which is used as a input stage of the oscillator consists of a positive feedback transconductors and a bump circuit with Gaussian-like I-V curve. The proposed neural oscillator has designed in integrated circuit with SPICE simulations. Simulations of a network of 4 oscillators which are connected with excitatory and inhibitory synapses demonstrate cooperative computation. Measurements of the fabricated oscillator chip with a $\pm$ 2.5 V power supply is shown and compared with the simulated results.

• Journal of Information Technology Application
• /
• v.3 no.4
• /
• pp.119-134
• /
• 2001

Improving software product quality is a key to increasing user satisfaction and to achieving competitive edge. There are two approaches to assure high software product quality; development process-oriented and product-oriented. There have been many efforts for improving software quality through process certification, for example, CMM, ISO 9000 family, ISO/IEC 12207, SPICE and Bootstrap. However, a good process alone cannot guarantee good product quality. A need for the evaluation of software product quality by an independent third party is growing rapidly for several reasons. We are concerned with an application of Statistical Quality Control (SQC) to the evaluation of software product quality to obtain the efficiency of evaluation processes and the objectivity of evaluation results. Methods for selecting test cases using a random sampling approach have been discussed and methods for selecting acceptance criteria with respect to software product quality have also been suggested.

• Journal of Korean Medical classics
• /
• v.23 no.1
• /
• pp.279-302
• /
• 2010

Spices are used to enhance the taste of Korean food. The term "Yangnyeom" contains a wishful meaning that it would be as good for health as medicine when eaten. It is prescribed as a medicine to heal disease according to the ancient medical books. Fifteen spices in Korean food such as vinegar, liquor, honey, water, wheat-gluten, sesame, sesame oil, garlic, green onion, ginger, mustard, pepper, cinnamon, soy sauce, salt, cheoncho, and others are prescribed as medicine for internal and external uses for almost every disease. To examine these spices, the subjects were treated with either the spice-boiled water or spice-mixed water, or applied externally. It is suggested that spices that are produced through peculiar traditional cooking method, fermenting, and those that have long-growth period, grew in the natural environment, and the like have efficacy as medicine. Spices can be sufficiently applied as emergency medicine, disease-treatment, subsidiary supplement, and preventive medicine.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.411-415
• /
• 2011

DC/DC switching power converters are commonly used to generate a regulated DC output voltages with high efficiencies from different DC input sources. The voltage mode DC/DC converter utilizes MOSFET (metal-oxide semiconductor field effect transistor), inductor, and a PWM (pulse-width modulation) controller with oscillator, amplifier, and comparator, etc. to efficiently transfer energy from the input to the output at periodic intervals. The fundamental boost converter and a buck converter containing a switched-mode power supply are studied. In this paper, the electrical characteristics of DC/DC power converters are simulated by program of SPICE, and the PWM controller is implemented to check the operation. In addition, power efficiency is analyzed based on the specification of each component.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.83-91
• /
• 1990

VOC(coltage controlled oscillator) circuits are necessary in applications such at the demodul-ation of FM signals, frequency synthesizer, and for clock recovery from digital data. In this paper, we designed the VCO circuit based on a OTA(operational transconductance amplifier) and the OP amp which using a differential amplifier by BiCMOS circuit. It consists of a OTA, voltage contorolled integrator and a schmitt trigger. Conventional VCO circuits are designed using the CMOS circuit, but in this paper we designed newly BiCMOS VCO circuit which has a good drive avlity, As a result of SPICE simulation, output frequency is 141KHz at 105KHz, and sensitivity is 15KHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.439-446
• /
• 1998

This paper presents design of SD adder and PD adder on Multi-Valued Logic. For implementing of Multi-valued logic circuits we use Current-mode CMOS circuits and also use Voltage-mode CMOS circuits partially. The proposed arithmetic circuits was estimated by SPICE simulation. At the SD(Signed-Digit) number presentation applying Multi-Valued logic the carry propagation is always limited to one position to the left this number presentation allows fast parallel operation. The addition method that add M operands using PD( positive digit number) is effective not only for the realization of the high-speed compact arithmetic circuit, but also for the reduction of the interconnection in the VLSI processor. therefor, if we use PD number representation, the high speed processor can be implementation.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.4
• /
• pp.387-396
• /
• 1999

Dog meat was begun to be edible by the Chinese, Japanese, the French, Belginan, German Philippines Vietnamese, North-Americans African-Indians Canadian-aborigines Alaskan aborigines including Kor-eans. According to the record, Korea has a long history to have eaten dog meat from the era of Sam-kug(three kingdoms BC 57∼AC 668) and so there are numerous languages proverbs, and customs re-lated to the dog meat. Over the long history there have been many records and recipes about the edib-leness of dog meat. But at present time only the way of cooking such as Bosintang(a soup) Suyuk(a boiled meat) Duruchighi(boiled meat added spice and slightly roasted) Muchim(boiled meat added by spice and mixed) Gaesoju(an extract) Jeongol(boiled meat mixed with spices vegetables and water on the pot) remains. Koreans eat dog meat following the traditional customs n the Boknal(hottest day in summer). Also the areas of Buyo. Sochon, Boryong adn Chongyang of Chungnam province and the ad-jacent areas like Kongju, Iksan, and Nonsan have customs to kill the dog and offer dog meat to the gue-sts in time of small or big occasions such as funeral ceremony Hoigap(anniversary of one's 60th birth-day) and one's birthday. This range of customs is expanding larger and larger. These areas are the cen-ter of past Baekche(BC 57∼AC 660). In spite of this it is unreasonable, and excessive action for foreig-ner to fine fault with the dog meat or Korean food culture.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1037-1040
• /
• 1998

In this paper, current conveyor building block is introduced and CMOS realization of this block is given. The input-impedance characteristics, current-transfer characteristics and voltage-transfer characteristics of this proposed current conveyor circuit are given. This characteristics of the CMOS current conveyor circuit is useful of the various applications which require a wideband. Using the Spice tool, the circuit is designed and the characteristics of CMOS current conveyor circuit is considered. Finally, refer to the simple applications.

• Journal of Korea Multimedia Society
• /
• v.3 no.5
• /
• pp.535-541
• /
• 2000

In this paper, we analyzed the characteristics of schottky junction to develop the voltage swing of ISL, and simulated the characteristics with the programs at this junctions. Simulation programs for analytic characteristics are the SUPREM V, SPICE, Medichi, Matlab. The schottky junction is rectifier contact between platinum silicide and silicon, the characteristics with programs has simulated the same conditions. The analytic parameters were the turn-on voltage, saturation current, ideality factor in forward bias, and has shown the results of breakdown voltage between actual characteristics and simulation characteristics in reverse bias. As a result, th forward turn-on voltage, reverse breakdown voltage, barrier height were decreased but saturation current and ideality factor were increased by substrates increased concentration variations.