• 제목/요약/키워드: Ion power supply

검색결과 101건 처리시간 0.023초

세계 지열에너지 활용 현황 및 전망 (Status and Outlook of World Geothermal Energy Utilization)

  • 송윤호
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.669-673
    • /
    • 2005
  • World geothermal resources potential is estimated to supply 189 EJ annually, which can take charge approximately a half of annual world energy consumpt ion, from considering identified resources and supplies in USA and Iceland. Present annual use of geothermal energy, on the other hand, is only $0.1\%$ of its potential, but still has $70\%$ share among total new renewables. World-wide installed capacity of geothermal power generation reaches 8,900 MWe and 27,825 MWt for direct uses in 2005 which is almost two-fold increase over 2000. This increase is mainly due to exploding expansion of geothermal heat pump utilization: USA and western European countries lead these trends. Although geothermal heat pump distribution in Korea is still in its starting phase, comparing to Swiss achievement in terms of areal utilization sense, we expect to come up with national supply of over 600,000 toe in near future.

  • PDF

전기자동차용 리튬이온전지를 위한 양극전극 분말 재료의 연구 동향 (Research Trends of Cathode Materials for Lithium-Ion Batteries used in Electric Vehicles)

  • 신동요;안효진
    • 한국분말재료학회지
    • /
    • 제26권1호
    • /
    • pp.58-69
    • /
    • 2019
  • High performance lithium-ion batteries (LIBs) have attracted considerable attention as essential energy sources for high-technology electrical devices such as electrical vehicles, unmanned drones, uninterruptible power supply, and artificial intelligence robots because of their high energy density (150-250 Wh/kg), long lifetime (> 500 cycles), low toxicity, and low memory effects. Of the high-performance LIB components, cathode materials have a significant effect on the capacity, lifetime, energy density, power density, and operating conditions of high-performance LIBs. This is because cathode materials have limitations with respect to a lower specific capacity and cycling stability as compared to anode materials. In addition, cathode materials present difficulties when used with LIBs in electric vehicles because of their poor rate performance. Therefore, this study summarizes the structural and electrochemical properties of cathode materials for LIBs used in electric vehicles. In addition, we consider unique strategies to improve their structural and electrochemical properties.

미세유체칩 내 자기조립화된 나노입자로 이루어진 이온교환막을 이용한 역전기투석 에너지 발전 (Energy Harvesting from Reverse Electrodialysis in Ion-Selective Membrane Formed with Self-Assembled Nanoparticles)

  • 최은표;권길성;김대중;박정열
    • 대한기계학회논문집B
    • /
    • 제38권5호
    • /
    • pp.437-441
    • /
    • 2014
  • 본 논문은 미세유체 시스템에서 농도차에 의한 역전기투석을 이용하여 에너지발전을 할 수 있는 장치를 제안한다. 역전기투석을 위한 이온교환막은 미세유체칩의 적정 위치에 자기조립화된 나노입자 사이의 공극으로 이루어지며, 이는 마이크로 용량의 나노입자가 분산된 용액 방울을 제어함으로써 쉽고 저렴한 방법으로 제작이 가능하다. 본 제안 시스템은 미세유체칩의 형상을 변형하거나 나노입자의 사이즈, 혹은 나노입자의 종류를 손쉽게 바꿔가며 최대 파워와 에너지 변환 효율을 향상 시킬 수 있다는 장점이 있다. 앞으로, 본 연구에서 제안하는 디바이스는 랩온어칩 시스템에서 다른 미세장치로 에너지를 공급하는 매개체로 이용 될 수 있을 뿐 아니라 더 다양한 재료를 이용함으로써 이온 교환현상 및 에너지 발전의 기초 연구에 활용될 수 있을 것이라 기대한다.

GPS를 이용한 옥외용 증강현실 시스템 개발 (The Development of Outdoor Augmented Reality System by GPS)

  • 최태종;장병태;한상휘;김정국;허웅
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(3)
    • /
    • pp.153-156
    • /
    • 2000
  • In this paper, we developed an outdoor augmented reality system which has remote real scenes acquisition ability. The real scenes acquisition system consists of Image acquisition system, tracking system, wireless data transceiver and power supply. The tracking system consists of Tans Vector and RT-20 which measures a position and attitude of the CCD camera that attached to the remote control helicopter. Wireless data transceiver system is utilized for data transmission of remote system that of attitude, position information, and real scenes data that acquired by the CCD camera. Maximum propelling power of remote control helicopter is 15Kg, so we used 7.2V li-ion cell as a power supply for system minimize. As the results of experiment, the developing system presented application possibility of remote information acquisition system such as construction simulation & estimation, broadcasting, tour guide.

  • PDF

UBM 마그네트론 스퍼터 시스템을 이용한 구리 타겟의 이온전류밀도 향상 연구 (Development of UBMS(Unbalanced Magnetron Sputtering) System and Ion Current Density Measurement of Copper Target)

  • 강충현;주정훈
    • 한국표면공학회지
    • /
    • 제50권3호
    • /
    • pp.192-197
    • /
    • 2017
  • A 6-way-cross consisting of a 2.75-inch CF flange was used as a main chamber on a PFEIFFER VACUUM TMP station based on a 67 l / sec turbo molecular pump and a diaphragm pump to produce a magnet array with a volume ratio of 5.5: 1.A 1-inch diameter copper target and graphite target were fabricated using MDX-1.5K from Advanced Energy Industries, Inc as a DC power supply. Ion current density of copper target and graphite target was measured by unbalanced magnetron sputtering. The basic pressure condition was $6.3{\times}10^{-7}mbar$ and the process pressure was Ar 50 sccm at $1.0{\times}10^{-2}mbar$ (7.5 mTorr) in the Ar atmosphere. Therefore, the relative density of copper ions reaching the substrate with the measured ion current density was derived.

와이어 전극과 평행판에서 발생되는 이온풍 특성 연구 (A Study on an Ion Wind Created by a Wire Electrode and Parallel Plates Assembly)

  • 안영철;황필재;이재근
    • 설비공학논문집
    • /
    • 제16권4호
    • /
    • pp.318-323
    • /
    • 2004
  • When a strong electric field is applied between a sharply curved electrode and a blunt surface, the corona may result in a gas movement in the electrode gap which is directed toward the blunt surface. That is called the corona wind. It enhances heat and mass transfer between the surface and the surrounding gas. Moreover such enhancement causes no noise or vibration, which can be applied in complex, isolated geometries, and allows simple control of surface temperatures. This paper examines the relationship between the corona wind and the relative humidity. The facility consists of high voltage power supply thin tungsten wire, plate electrode, multimeter, microammeter and flow meter. Gas velocity is a linear function of voltage, relative humidity and is proportional to the square root of the current. The maximum velocities for the positive and negative corona discharge are 1.9 m/s (2.74 CMM/m), 1.5 m/s(2.15 CMM/m), respectively.

갈륨 소스를 이용한 집속이온빔 컬럼 개발 (Development of Focused Ion Beam Column Using Ga Source)

  • 김창조;이재승;최윤;최은하;박철우;김종국;김영권;엄창용
    • 대한기계학회논문집A
    • /
    • 제33권3호
    • /
    • pp.185-189
    • /
    • 2009
  • Focused ion beam system was designed, which includes LMIS, electrostatic lens and high voltage power supply. Control program is updated for high speed image processing. The details of vibration-free vacuum system and other important electrical parts were trouble-shooted for appropriately controlling high acceleration voltages.

통신해양기상위성 전력계 예비설계 (COMS Electrical Power Subsystem Preliminary Design)

  • 구자춘;김의찬
    • 한국위성정보통신학회논문지
    • /
    • 제1권2호
    • /
    • pp.95-100
    • /
    • 2006
  • 통신해양기상위성의 전력계는 향상된 Eurostar 3000 버전에 바탕을 두고 있다. Eurostar 3000 전력계는 정상상태 또는 하나의 결함에서도 자율적으로 동작하며 높은 수준의 재구성 능력 및 유연성을 제공한다. 본 논문에서는 통신해양기상위성 전력계 예비설계 결과를 소개한다. 통신해양기상위성 전력계는 하나의 배터리, 태양전지어레이 윙, 전력공급기, 파이로 유닛 및 태양전지어레이 구동기 그리고 릴레이 및 퓨즈 브래킷 들로 구성된다. 통신해양기상위성 전력계는 3 kW의 버스 전력을 제공할 수 있다. 태양전지어레이는 2개의 태양전지판으로 구성된 전개할 수 있는 윙으로 구성된다. 태양전지는 GaAs/Ge 3중 접합 셀로 선정되었다. Li-ion 배터리는 10개의 직렬 연결된 셀 모듈로 구성되며 각 모듈은 셀 5개가 병렬로 연결된다. 전력공급기는 태양전지어레이 및 배터리와 함께 50 V로 완전 정류된 하나의 전력 버스를 생성한다. 전력 버스는 릴레이 및 퓨즈 브래킷 들에 의해 중앙 집중되어 보호되고 분배된다. 파이로 유닛은 점화 작동기 장치로 전력을 공급한다. 태양전지어레이는 자세제어계의 제어로 태양전지어레이 구동기에 의해 회전된다. 전력계의 제어 및 감시는, 특히 배터리, 전력공급기와 탑재 소프트웨어의 결합으로 수행된다.

  • PDF

전력품질 안정화용 비대칭 하이브리드 슈퍼커패시터 셀 및 모듈 특성 (The Characteristics of Asymmetric Hybrid Supercapacitor Cells and Modules for Power Quality Stabilization)

  • 이병관;맹주철;이종규;윤중락
    • 전기학회논문지
    • /
    • 제65권4호
    • /
    • pp.617-621
    • /
    • 2016
  • In addition to the energy storage facilities based on high power technologies, Electric double layer capacitors(EDLC) are today's candidate for power quality stabilization. However, its low energy density is often inhibiting factor for application of electric power industry. Hybrid supercapacitor is an promising energy storage device that positioned between conventional EDLC and Li-ion battery. This paper describes the preparation and characteristics of a hybrid supercapacitor and module for power quality stabilization. A cylindrical 3200F hybrid supercapacitor ($60{\times}74.5mm$) was assembled by using the $Li_4Ti_5O_{12}$ electrode as an anode and activated carbon as a cathode. It shows 2.5 times higher energy density than conventional EDLC with the same volume. In order to determine the characteristics of the hybrid supercapacitor Module for uninterruptible power supply (UPS), hybrid supercapacitor cells were connected in series with active balancing circuit. At even the high current density of 14A(10C), Module prepared by 18 cells showed the capacitance of 170F at 30~50V, suggesting the applicability for UPS.

전기추진 비행기용 하이브리드 추진시스템 패시브 전력제어 하드웨어 시뮬레이션 (Hardware passive power control simulation of hybrid propulsion system for electric propulsion aircraft)

  • 박부민;이강엽;황오식;김영문;김춘택
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.544-547
    • /
    • 2011
  • 한국항공우주연구원에서 개발 중인 중형 전기추진 무인기의 추진시스템에 대하여 하드웨어 통합 패시브 전력제어 시뮬레이션을 수행하였다. 이 추진시스템은 태양전지, 연료전지 및 배터리를 통합하여 전력원으로 사용하는 하이브리드 시스템이다. 연료전지는 I-V 커브를 모사하는 모사기를 제작하여 사용하였으며, 나머지 구성품들은 실제 탑재품들을 사용하였다. 시험 결과 각 전력원들은 요구전력 변화에 대해서 고유의 특성을 보이면서 원활히 동작되며, 안정적으로 운전됨을 확인하였다.

  • PDF