• E2M - 전기 전자와 첨단 소재
• /
• 제7권2호
• /
• pp.100-106
• /
• 1994

A bilayer film consisting of a layer of a-Se$_{75}$ Ge$_{25}$ with a surface layer of silver -100[.angs.] thick and a monolayer film of a-Se$_{75}$ Ge$_{25}$ are irradiated with 9[keV] Ga$^{+}$ ion beam. The Ga$^{+}$ ion (10$^{16}$ [ions/cm$^{2}$] exposed a-Se$_{75}$ Ge$_{25}$ and Ag/a-Se$_{75}$ Ge$_{25}$ thin films show an increase in optical absorption, and the absorption edge on irradiation with shifts toward longer wavelength. The shift toward longer wavelength called a "darkening effect" is observed also in film exposure to optical radiation(4.5*10$^{20}$ [photons/cm$^{2}$]). The 0.3[eV] edge shift for ion irradiation films is about twice to that obtained on irradiation with photons. These large changes are primarily due to structural changes, which lead to high etch selectivity and high sensitivity.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.904-909
• /
• 2019

$100^{\circ}C$에 소성한 인듐 아연 산화막 (IZO)을 이온빔 처리하여, 균일할 수평 액정 배향을 구현하였다. 유리 기판 위에 코팅된 IZO 박막을 $100^{\circ}C$에 소성하고 액정 배향 기술로 이온빔을 사용하였다. 이것을 이용하여 얻어진 액정 배향의 특성을 분석하기 위해서, 편광 현미경과 결정 회전법을 사용하였다. 또한 이온빔 처리된 IZO 박막을 이용하여 만든 액정 셀이 높은 품질의 액정 소자에 충분한 열적 안정성을 가진다는 것을 확인할 수 있었다. 그리고 전계방출 주사 전자 현미경을 이용하여 이온빔의 IZO 박막의 표면에 미치는 영향을 분석하였다. 이것을 통하여 이온빔이 IZO 박막 표면의 거칠기를 변화시키고, 액정 배향에 영향을 준다는 것을 확인할 수 있었다. 마지막으로 IZO 박막으로 제작한 액정 셀의 전기-광학 특성을 측정하였다. 그리고 이것이 기존에 사용되는 러빙법 처리된 폴리이미드 박막으로 제작한 액정 셀보다 뛰어난 특성을 가진다는 것을 확인하였다. 또한 액정 고정 에너지를 측정하여 이것이 균일한 액정 배향을 구현하기 위한 적합한 특성을 가진다는 것을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제17권6호
• /
• pp.355-358
• /
• 2016

We present the alignment characteristics of LC (liquid crystal) molecules on solution-derived HLO (hafnium lanthanum oxide) films fabricated using IB (ion-beam) irradiation. We then demonstrated that LC molecules can be homogeneously and uniformly aligned on the HLO film irradiated at an IB incident energy of 1.2 keV. Physicochemical analysis methods such as atomic force microscopy and X-ray photoelectron spectroscopy were used to verify the LC alignment mechanism on the IB-irradiated HLO film. In addition, the electro-optical performance of a TN (twisted-nematic) cell fabricated using the IB-irradiated HLO film exhibited characteristics superior to those of the conventional TN cell fabricated using a rubbed polyimide layer.

• 한국표면공학회지
• /
• 제24권3호
• /
• pp.137-143
• /
• 1991

The relation between the ion irradiation induced grain growth and the basic parameters sinvolved in ion beam mixing process was studied. TEM micrographs showed that a significant grain growth has been induced by Ar+ irradiation at room temperature. The grain size increases rapidly in low dose region, while it approaches a saturated value in high dose region, and it has close relationship with nuclear energy deposition and thermodynamic properties such as cohesive energy ( Hc) and heat of mixing ( Hm). A model for the grain growth based on the thermal spike induced atomic migration was developed and applied to interpret experimental results.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.509-515
• /
• 2007

In order to fabricate adhesiveless 2-layer flexible copper clad laminate (FCCL) used for COF (chip on film) with high peel strength, polyimide (PI; Kapton-EN, $38\;{\mu}m$) surface was modified by reactive $O_2^+$ and $N_2O^+$ ion beam irradiation. 300 mm-long linear electron-Hall drift ion source was used for ion irradiation with ion current density (J) higher than $0.5\;mA/cm^2$ and energy lower than 200 eV. By vacuum web coating process, PI surface was modified by linear ion source and then 10-20 nm thick Ni-Cr and 200 nm thick Cu film were in-situ sputtered as a tie layer and seed layer, respectively. Above this sputtered layer, another $8-9{\mu}m$ thick Cu layer was grown by electroplating and subsequently acid and base resistance and thermal stability were tested for examining the change of peel strength. Peel strength for the FCCLs treated by both $O_2^+$ and $N_2O^+$ ion irradiation showed similar magnitudes and increased as the thickness of tie layer increased. FCCL with Cu (200 nm)/Ni-Cr (20 nm)/PI structure irradiated with $N_2O^+$ at $1{\times}10^{16}/cm^2$ ion fluence was proved to have a strong peel strength of 0.73 kgf/cm for as-received and 0.34 kgf/cm after thermal test.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.80-84
• /
• 2002

Silver species other than the silver ion were formed by UV irradiation on polymer electrolyte membranes containing silver salts and their effect on complexation behavior between the silver and olefin was investigated through the separation performance of olefin/paraffin mixtures. The ideal propylene/propane separation factor reached 350 and the separation coefficient was ca.15 due to the high loading amount of silver ions into poly(2-ethyl-2-oxazoline) (POZ) without UV irradiation. On UV irradiation either in air or under nitrogen, the silver-POZ membranes became yellow-brown initially due to the formation of colloidal silver particles, and finally black and metal-like luster. Even when Ag$^{+}$ was converted, to some extent, to Ag$^{\circ}$ by UV irradiation in air at the early stage, the separation coefficient of olefin/paraffin mixtures was maintained. This suggests that silver species other than the silver ion is active for olefin carrier for facilitated transport. Meanwhile the steady decrease of the separation coefficient was observed in the silver/POZ membranes irradiated under $N_2$. It is suggested that the reduction of silver ions in POZ goes through a different photoreduction mechanism with UV irradiation depending on the environment.t.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3063-3070
• /
• 2014

In this study, poly(N-methylol methacrylamide) (NMMAAm) and poly(N-methylol methacrylamide/vinyl sulphonic acid) (NMMAAm-VSA) hydrogels were synthesized by $^{60}Co-{\gamma}$ ray irradiation at an ambient temperature. The graphs belonging to the gelation percent- percent-dose and swelling curves were drawn by using data which were obtained from water and different pH solutions. Characterization of hydrogels was performed by FTIR and DSC-TGA analysis. Heavy metal ion ($Ni^{2+}$, $Co^{2+}$) removal capacities of hydrogels were investigated in aqueous solutions, which had different concentrations (100-1500 mg/L). In metal ion removal studies, pH value of aqueous medium was kept constant at 5.0. Maximum metal ion removal values were obtained for NMMAAm-VSA (1:3 mole ratio) hydrogels. Metal ion removal capacities of NMMAAm-VSA (1:3 mole ratio) hydrogels were found as 82 mg/g and 98 mg/g for $Ni^{2+}$ and $Co^{2+}$ ions, respectively.

• Nuclear Engineering and Technology
• /
• 제51권8호
• /
• pp.1983-1990
• /
• 2019

Spray deposited Molybdenum trioxide (MoO₃) thin film of thickness nearly 379 nm were irradiated with 200 MeV Ag¹⁵⁺ ion beam at different fluences (Ø) of 5 ×10¹¹, 1 × 10¹², 5 × 10¹² and 1 × 10¹³ ions/㎠. The X-ray diffraction (XRD) pattern of the pristine film confirms orthorhombic structure and the crystallinity decreased after irradiation with the fluence of 5 × 10¹¹ ions/㎠ due to irradiation induced defects and became amorphous at higher fluence. In pristine film, Raman modes at 665, 820, 996 cm^-1 belong to Mo-O stretching, 286 cm^-1 belong to Mo-O bending mode and those below 200 cm^-1 are associated with lattice modes. Raman peak intensities decreased upon irradiation and vanished completely for the ion fluence of 5 ×10¹² ions/㎠. The percentage of optical transmittance of pristine film was nearly 40%, while for irradiated films it decreased significantly. Red shift was observed for both the direct and indirect band gaps. The pristine film surface had densely packed rod like structures with relatively less porosity. Surface roughness decreased significantly after irradiation. The electrical transport properties were also studied for both the pristine and irradiated films by Hall effect. The results are discussed.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.16-19
• /
• 2009

We have studied the liquid crystal alignment properties for various alignment methods on the homogeneous polyimide surface. Suitable liquid crystal alignment for one-side alignment cell on the polyimide surface by all alignment method was observed. Highly pre-tilt angle of the NLC for both-side rubbing cell was measured. But, low pre-tilt angle of the NLC for one-side ion beam and UV irradiation cell was observed. We consider that the pre-tilt angle of NLC for one-side ion beam and UV irradiation on the PI surface is lower than that of the PI surface with rubbing. Also, the suitable transmittance-voltage curves for the one-side rubbing TN-LCD on the PI surface with one-side UV irradiation were measured. Also, good response time characteristics of the one-side rubbing TN-LCD on the polyimide surface with one-side UV irradiation can be measured.

• Journal of Information Display
• /
• 제4권2호
• /
• pp.35-42
• /
• 2003

The field emission and luminescent properties of carbon nanotubes (CNTs) that were straightened by argon ion irradiation were investigated. Argon ion irradiation permanently straightened both as-grown and screen-printed CNTs (SP-CNTs) in the presence of a strong electric field. The straightening process enhanced the emission properties of as-grown CNT films by showing a decrease in turn-on field, an increase in total emission current, and a stable emission. Recurring problems associated with SP-CNTs, such as bent or/and buried CNTs and the degradation in binder-residue-induced emission, were improved by the permanent straightening of CNTs and protruding CNTs from binders by the irradiation treatment, in addition to its surface cleaning effect. Furthermore, we confirmed that the number of emission sites increases by observing the luminescent properties of CNT films after the straightening. These findings here suggest that ion irradiation treatment is an effective method for achieving uniform field emission and to reduce the electrical aging time.