• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.68-69
• /
• 1998

Nano-crystalline silicon(nc-Si) thin films were directly depposited by ion beam assisted electron beam depposition (IBAED) method. The visibe luminescence in IBAED sampples were originated from not an oxygen bond but Si nano-crystallites. And we can conclude that the ion beam would be contribute to the suppression of the Si-O bond formation.

• 한국전기전자재료학회논문지
• /
• 제20권7호
• /
• pp.615-619
• /
• 2007

MgO layer plays an important role for plasma display panels (PDPs). In this experiment, ion beam assisted deposition (IBAD) methode was uesed to deposit a MgO thin film and the assisting oxygen ion beam energy was varied from 100 eV to 500 eV. In order to investigate the relationship between the secondary electron emission and the defect levels of the MgO layer, we measured the cathodoluminescence (CL) spectra of the MgO thin films, and we analyzed the CL peak intensity and peak transition. The results showed that the assisting ion beam energy played an important role in the peak intensity and the peak transition of the CL spectrum. The properties of MgO thin film were also analyzed using XRD and SEM, these results showed the assisting ion beam energy had direct effect on characteristics of MgO thin film.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 추계 학술발표 강연 및 논문 개요집
• /
• pp.59-59
• /
• 1993

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.4711-4717
• /
• 2011

PVD방식에 의한 TiN박막의 형성은 DC와 RF sputtering deposition 방식을 적용할 수 있지만, 플라즈마 생성을 위해 주입된 가스의 이온화율이 떨어져 박막성형 속도가 느려지며, 박막과의 접착력을 높이는 것에도 한계성을 가지고 있다. 이를 개선하기 위해 증착과 동시에 이온빔을 조사하는 이온빔 진공증착 IBAD(Ion beam assisted deposition)를 이용 하게 되면, 코팅 전에 소재 표면을 Ion beam으로 조사하기 때문에 표면cleaning의 효과가 크고, 접착력이 높은 박막을 얻을 수 있다. 또한 고 진공과 낮은 온도에서도 균일한 두께의 고순도의 박막을 얻을 수 있는 이점이 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.202-202
• /
• 1999

The Polyethylene (PE), Polystyrene (PS) and Polytetrafluoroethylene (PTFE) surface modification was investigated by hydrogen io assisted reaction (H-IAR) in oxygen environment. The IAR is a kind of surface modification techniques using ion beam irradiation in reactive gas environment. The energy of hydrogen ion beam was fixed at 1keV, io dose was varied from 5$\times$1014 to 1$\times$1017 ions/$\textrm{cm}^2$, and amount of oxygen blowing gas was fixed 4ml/min. Wettability was measured by water contact angles measurement, and the surface functionality was analyzed by x-ray photoelectron spectroscopy. The contact angle of water on PE modified by argon ion beam only decrease from 95$^{\circ}$ to 52$^{\circ}$, and surface energy was not changed significantly. But, the contact angle using hydrogen ion beam with flowing 4ml/min oxygen stiffly decreased to 8$^{\circ}$ and surface energy to 65 ergs/cm. In case of PS, the contact angle and surface energy changes were similar results of PE, but the contact angle of PTEE samples decreased with ion dose up to 1$\times$1015 ions/$\textrm{cm}^2$, increased at higher dose, and finally increased to the extent that no wetting was appeared at 1$\times$1017 ions/$\textrm{cm}^2$. These results must be due to the hydrogen ion beam that cleans the surface removing the impurities on polymer surfaces, then hydrogen ion beam was activated with C-H bonding to make some functional groups in order to react with the oxygen gases. Finally, unstable polymer surface can be changed from hydrophobic to hydrophilic formation such as C-O and C=O that were confirmed by the XPS analysis, conclusionally, the ion assisted reaction is very effective tools to attach reactive ion species to form functional groups on C-C bond chains of PE, PS and PTFE.

• 한국진공학회지
• /
• 제8권2호
• /
• pp.121-126
• /
• 1999

Cu thin film was deposited by a self-ion assisted beam source (SIAB) and the assessment of the Cu films was given. Some characteristics of the source and the experimental procedure are described at various conditions such as total power, ionization efficiency, and ion current vs. deposition rate. The dependence of crystalline structure, impurity concentration, and resistivity of the Cu films deposited by SIAB on acceleration voltage are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1791-1793
• /
• 1998

The thin film metal electrode for PDP needs low resistivity and strong adhesion. But the sputtered copper film is weak, in the adhesion between copper and glass. In this paper, we investigated the characteristics of resistivity and adhesion about Cu thin film using Ion Beam Assisted DC Planar Magnetron Sputtering(DCPM) Device.

• The Korean Journal of Ceramics
• /
• 제2권1호
• /
• pp.48-53
• /
• 1996

Ion beam assisted crystallization behavior of sol-gel derived $PbTiO_3$ thin films, deposited on bare silicon(100) substrates by spin-casting method, has been investigated. Ar ion bombardment was directly conducted on the spincoated film surface with or without heating the film from room temperature to $300^{\circ}C$. Ion dose was changed from $5{\times}10^{15}$ to $7.5{\times}10^{16}$ $Ar^-/cm^2$. Formation of (110) oriented perovskite phase was obseerved with ion dose above $5{\times}10^{16}\; Ar^+/cm^2$. Crystallization of $PbTiO_3$ thin film could be enhanced with increasing the Air ion dose, or heating the substrate during ion bombardment. Crystallization of the $PbTiO_3$ films by ion bombardment was related to the local heating effect during ion bombardment.

• 폴리머
• /
• 제26권6호
• /
• pp.718-727
• /
• 2002

본 연구에서는 최종 복합재료의 기계적 계면특성을 향상시키기 위하여 산소 분위기 하에서 반응성 기체를 사용하는 이온 보조 반응법에 의해 탄소섬유 표면에 Ar+ 이온 빔을 조사하였다. 그리고, 단일 섬유 pull-out 시험을 실시하여 가해진 이온 에너지 세기에 대한 수지 내의 섬유의 뽑힘 정도를 측정한 후 Greszczuk의 .기하학적 모델에 기초하여 섬유/매트릭스 간의 계면특성을 알아보고자 하였다. 그 결과, 탄소섬유를 이온 빔으로 처리함에 따라 섬유와 매트릭스 간의 부착력 증가의 원인이 되는 섬유축 방향으로의 표면 etching 및 반응성 그룹이 형성되어 계면 전단강도가 향상되었으며 0.8 keV 이온 빔 세기에서 최대값을 나타내었다.

• 한국진공학회지
• /
• 제17권2호
• /
• pp.96-101
• /
• 2008

MgO는 플라즈마 디스플레이 패널 (Plasma Display Panel, PDP)의 보호막으로 널리 쓰이고 있다. 기존의 산소 이온빔 보조 증착(Ion-Beam-Assisted Deposition, IBAD) 방법을 이용하여 MgO 보호막을 형성시킨 경우 이온빔의 충전에 의해 야기되는 아크(Arc) 문제 등이 있었다. 이 문제점을 해결하기 위하여, 산소 중성빔 보조증착(Neutral-Beam-Assisted Deposition, NBAD) 방법을 이용하여 MgO를 증착하였다. 그리고 산소 중성빔의 에너지를 변화시킴에 따라 MgO 보호막의 특성과 PDP 패널 방전 특성에 미치는 영향을 분석하였다. 이에 따른 실험 결과로부터 산소 중성빔 에너지가 300eV일 때, 최소 방전 개시 전압, 최고 발광 휘도 및 최고 발광 효율을 얻을 수 있었다.