• 품질경영학회지
• /
• 제17권1호
• /
• pp.11-18
• /
• 1989

A one-upper level warehouse n-Iower level retailer inventory distribution model is discussed. This paper presents the parallel-type inventory structure using an order-up-to-level invertory control system for analyzing the approximation of the expected units back ordered and the measure of service. We find that the total expected backorder units in system can substitute the expected back orders in the last two periods for the expected back orders in total periods. The rate of total expected back orders which is the measure of disservice, is given by dividing the improved units of total expected backorder into the total demand during an order cycle. The average annual total cost in system is obtained by considering the results, but from the viewpoint of this study the cost analysis is not described.

• 한국전자거래학회지
• /
• 제19권1호
• /
• pp.1-14
• /
• 2014

본 논문의 목적은 재고관리를 위한 RFID 시스템을 도입하는데 있어서 적합한 비용을 산출하여 경제성을 평가하고, SCM 환경에서 생산시점 재고관리 모형을 설계하는 것이다. 경제성 분석은 변화하는 태그의 가격에 따른 총 생산 순이익을 기준으로 하였으며, 초기투자가 필요한 시스템에 적용될 수 있게 결정 모델을 설정하였다. 재고관리 시스템은 900MHz 대역의 수동형 태그를 사용하는 RFID 리더와 4개의 안테나를 이용하여 구현하였다. 그 결과 태그가격의 한계치 설정에 따른 구현 시스템의 도입을 결정하는 도구를 개발하였으며, 안테나의 방향성 있는 배치에 의해서 성공적인 재고관리 시스템을 설계하였다.

• 제어로봇시스템학회논문지
• /
• 제3권5호
• /
• pp.532-541
• /
• 1997

This article derives an analytic solution to determine the optimal size of multiple noncontinuous process and storage units. The total cost to be minimized consists of the setup cost of noncontinuous processing units and the inventory holding cost of feedstock/product storages. A novel approach, which is called PSW(Periodic Square Wave) model, is applied to represent the material flow among non-continuous units and storages. PSW model presumes that the material flow between unit and storage is periodic square wave shaped. The resulting optimal unit size has similar characteristics with the classical economic lot sizing model such as EOQ(Economic Order Quantity) or EPQ(Economic Production Quantity) model in a sense that the unit size is determined as the balance between setup and inventory holding cost. However, the influence of inventory holding cost of PSW model is different from that of EOQ/EPQ model. EOQ/EPQ model includes only the product inventory holding cost but PSW model includes all inventory holding costs around the non-continuous unit with proportional contribution. PSW model is suitable for analyzing interlinked process-storage system. The optimal lot size of PSW model is smaller than that of EOQ/EPQ model. This is quitea remarkable result considering that the EOQ/EPQ model has been is widely used since last half century.

• 대한산업공학회지
• /
• 제37권1호
• /
• pp.1-9
• /
• 2011

This paper presents a new method that can solve the integrated problem of combined location routing and inventory problem (CLRIP) efficiently. The CLRIP is used to establish facilities from several candidate depots, to find the optimal set of vehicle routes, and to determine the inventory policy in order to minimize the total system cost. We propose a mathematical model for the CLRIP with budget constrained. Because this model is a nonpolynomial (NP) problem, we propose a endosymbiotic evolutionary algorithm (EEA) which is a kind of symbiotic evolutionary algorithm (SEA). The heuristic method is used to obtaining the initial solutions for the EEA. The experimental results show that EEA perform very well compared to the existing heuristic methods with considering inventory control decisions.

• 대한공간정보학회지
• /
• 제17권2호
• /
• pp.123-131
• /
• 2009

21세기 정보통신기술은 다양한 공간정보를 온라인으로 전송할 수 있는 수준에 이르고 있으며, 컴퓨터를 이용한 출력기술도 품질면에서 인쇄와 대등한 위치에 이르렀다. 이와 더불어 지도 사용자들 역시 다양한 공간정보를 온라인 상에서 직간접적으로 취득하길 원하고 있다. 그럼에도 불구하고 우리나라의 지형도 공급시스템은 오프라인 형태를 유지하고 있어 온라인 형태의 선진국에 비해 재고관리, 신속성, 경제성면에서 비효율성을 나타내고있다. 본 연구에서는 효율적인 지도공급시스템을 구축하기위해 현 공급체계의 문제점을 분석하고, 사용자요구지도제작, 온라인 결제 및 판매, 재고관리, 메타데이터구축, 보안모듈 등을 개발하였다. 개발된 시스템을 평가한 결과 기존의 방식에 비해 지도공급 및 관리의 효율성이 향상되었으며 사용자요구지도의 제작이 가능해졌다.

• 한국국방경영분석학회지
• /
• 제3권2호
• /
• pp.79-89
• /
• 1977

The purpose of this thesis is to overcome the shortcomings of the existing system which lacks cost-conciousness and does not consider the essentiality or the importance of an item, and to seek the method of providing effective, efficient and economic supply which is the objective of the military inventory management. Selective management technique and lot size model whose demand, and order and shipping time are distributed, are intorduced, and required distributions and parameters are analyzed. Finally hypothetical data are utilized to obtain the model output, which are compared with the existing model and analyzed.

• 한국컴퓨터정보학회논문지
• /
• 제12권5호
• /
• pp.273-284
• /
• 2007

본 논문은 재구성가능생산시스템 환경에서 e-MarketPlace를 통한 거래상황을 도입한 주기적 검토 재고모형을 연구한다. 의사결정권자는 고객의 확률적 수요를 만족시키기 위해서 생산용량/생산량을 확장/축소하거나 e-Marketplace를 통해 긴급으로 재고를 보충/처리한다. e-MarketPlace로부터의 거래 시 재고의 보충/처리에 걸리는 리드타임은 시스템의 생산리드타임보다 짧지만, 단위거래비용(구매/판매비용)은 생산용량/생산량을 한 단위 확장/축소하는 비용보다 높기 때문에 각 대안들의 비용-리드타임간의 trade-off가 고려된다. 추가적으로 e-MarketPlace로부터 재고를 보충하거나 생산용량을 확장하는 경우 그 수량에 따른 규모의 경제를 고려하기 위해 고정 비용이 포함된다. 우리는 제안되는 모형의 최적 정책형태를 규정하기 위해 동적계획모형과 K-convexity 기법을 적용하고, base stock policy와 (s,S) type policy의 조합으로 구성된 최적 생산-재고관리 정책을 제시한다.

• 한국시뮬레이션학회논문지
• /
• 제12권2호
• /
• pp.1-11
• /
• 2003

In this paper, we focus an optimal policy focus optimal class of (s, S) inventory control systems. To this end, we use the perturbation analysis and apply a stochastic optimization algorithm to minimize the average cost over a period. We obtain the gradients of objective function with respect to ordering amount S and reorder point s via a combined perturbation method. This method uses the infinitesimal perturbation analysis and the smoothed perturbation analysis alternatively according to occurrences of ordering event changes. Our simulation results indicate that the optimal estimates of s and S obtained from a stochastic optimization algorithm are quite accurate. We consider that this may be due to the estimated gradients of little noise from the regenerative system simulation, and their effect on search procedure when we apply the stochastic optimization algorithm. The directions for future study stemming from this research pertain to extension to the more general inventory system with regard to demand distribution, backlogging policy, lead time, and review period. Another directions involves the efficiency of stochastic optimization algorithm related to searching procedure for an improving point of (s, S).

• 품질경영학회지
• /
• 제11권1호
• /
• pp.2-9
• /
• 1983

For the optimal achievement of system goals through a systematic analysis of the complex problems, systems engineering provides us the concepts and methodology that include comprehensive interpretability (or understandability), universal applicability, and feasibility. Under this aspect, the main objective of this study is that it introduces mathematical system theory (MST) as the fundamental tool of SE into the Inventory Control among the related parts with IE, and review it's applicability. Through its work, we can find that it has the alternative aspects with which it can replace other existing methods for problem-solving in understanding and analyzing structurally systems in themselves as well as being considerable of the time evolutionary process of a given system.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2104-2125
• /
• 2021

This paper presents the verification and validation (V&V) of a calculation module for isotope inventory prediction to control the back-end cycle of spent nuclear fuel (SNF). The calculation method presented herein was implemented in a two-step code system of a lattice code STREAM and a nodal diffusion code RAST-K. STREAM generates a cross section and provides the number density information using branch/history depletion branch calculations, whereas RAST-K supplies the power history and three history indices (boron concentration, moderator temperature, and fuel temperature). As its primary feature, this method can directly consider three-dimensional core simulation conditions using history indices of the operating conditions. Therefore, this method reduces the computation time by avoiding a recalculation of the fuel depletion. The module for isotope inventory calculates the number densities using the Lagrange interpolation method and power history correction factors, which are applied to correct the effects of the decay and fission products generated at different power levels. To assess the reliability of the developed code system for back-end cycle analysis, validation study was performed with 58 measured samples of pressurized water reactor (PWR) SNF, and code-to-code comparison was conducted with STREAM-SNF, HELIOS-1.6 and SCALE 5.1. The V&V results presented that the developed code system can provide reasonable results with comparable confidence intervals. As a result, this paper successfully demonstrates that the isotope inventory prediction code system can be used for spent nuclear fuel analysis.