• 대한전기학회논문지
• /
• 제40권3호
• /
• pp.243-249
• /
• 1991

Adaptive mesh refinement scheme is incorporated with the boundary element analysis in order to get accurate solution with relatively fewer unnowns for magnetostatic field analysis. A new andsimple posteriori local error estimate is also presented. The local error is defined as an integraktion over the element of the difference between solutions from quadratic interpolation functions and linear interpolation functions and is used as the criterion for mesh refinement. Case study with a singular point reveals that adaptive meshes are more efficient in accuracy of solutions than uniform meshs generated by dividing al the elements evenly. The adaptive meshes give much better rate of convergence in global errors than the uniform meshes.

• 한국전산유체공학회지
• /
• 제11권4호
• /
• pp.39-47
• /
• 2006

In this paper, the authors developed a multidimensional interpolation method inside a finite volume cell in the computation of high-order accurate numerical flux such as the fifth order WEND (weighted essentially non-oscillatory) scheme. This numerical method starts from a simple Taylor series expansion in a proper spatial order of accuracy, and the WEND filter is used for the reconstruction of sharp nonlinear waves like shocks in the compressible flow. Two kinds of interpolations are developed: one is for the cell-averaged values of conservative variables divided in one mother cell (Type 1), and the other is for the vertex values in the individual cells (Type 2). The result of the present study can be directly used to the cell refinement as well as the convective flux between finer and coarser cells in the Cartesian adaptive grid system (Type 1) and to the post-processing as well as the viscous flux in the Navier-Stokes equations on any types of structured and unstructured grids (Type 2).

• 전자공학회논문지B
• /
• 제31B권9호
• /
• pp.112-123
• /
• 1994

In this paper, inspection and subpixed alignment algorithms of SMD's (Surface Mounting Devices) using fuzzy morphology are proposed. First, camera calibration is performed and then the inspection algorithm detects defects such as lead bending and breaking using the ruler generated by fuzy morphology. The SMD having no defects is tested whether it is mounted in the specified position or not. The proposed subpixel alignment algorithm detects accurately orientation and position using subpixel interpolation. It consists of two parts: preprocessing and main processing steps, in which corner points and coarse orientation of a SMD are detected, and interpolation is used to obtain final parameters with wubpixel accuracy. The computer simulation shows that the proposed algorithms give more accurate parameters, and they can be applied to fast and accurate automatic surface mounting systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.621-628
• /
• 2000

A kinematic ball bar measuring system can analyze the various errors of a machine tool easil rapidly with only one measurement, But it cannot be used to measure the errors of the equipment the semiconductor manufacturing (e.g. chip mounter, PCB router etc.) not to use a cir interpolation. This paper presents the method to apply a kinematic ball bar measuring system tc machines which use merely a linear interpolation Also, the work of measuring and calibratir various errors of a chip mounter with a kinematic bal1 bar measurement system is accomplished

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.1011-1015
• /
• 2000

In this paper, the case studies of reducing rotational errors is theoretically done for a grinding spindle with an active magnetic bearing system. The rotational errors acting on the magnetic bearing spindle are due to mass unbalance of rotor, runout, grinding excitation and unmodeled nonlinear dynamics of electromagnets. The adaptive feedforward method based on LMS algorithm is discussed to compensate output and input disturbances, and investigated its effectiveness by numerical simulation. The feedforward control reduced external excitation and rotational error for specified frequency. The interpolation method using impulse function for cancelling the electrical 'uncut is studied. These methods show their effectiveness for the rotational accuracy of the improving magnetic bearing spindle through some simulation results of the rotational error decreased by them.

• 대한수학회지
• /
• 제51권2호
• /
• pp.267-288
• /
• 2014

We propose and analyze two-scale product approximation for semilinear heat equations in the mixed finite element method. In order to efficiently resolve nonlinear algebraic equations resulting from the mixed method for semilinear parabolic problems, we treat the nonlinear terms using some interpolation operator and exploit a two-scale grid algorithm. With this scheme, the nonlinear problem is reduced to a linear problem on a fine scale mesh without losing overall accuracy of the final system. We derive optimal order $L^{\infty}((0, T];L^2({\Omega}))$-error estimates for the relevant variables. Numerical results are presented to support the theory developed in this paper.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.17-22
• /
• 2007

Chimera grid Method is widely used in Computational Fluid Dynamics due to its simplicity in constructing grid system over complex bodies. Especially, Chimera grid method is suitable for unsteady flow computations with bodies in relative motions. However, interpolation procedure for ensuring continuity of solution over overlapped region fails when so-call orphan cells are present. We have adopted MLS(Moving Least Squares) method to replace commonly used linear interpolations in order to alleviate the difficulty associated with orphan cells. MSL is one of interpolation methods used in mesh-less methods. A number of examples with MLS are presented to show the validity and the accuracy of the method.

• 한국측량학회지
• /
• 제9권1호
• /
• pp.63-73
• /
• 1991

음향측심자료는 연직단면상의 연속자료이며 측심선사이에는 자료추출점이 없다. 본 연구에서는 음향측심자료에 대하여 측심선상에서 등간격으로 선형보간을 실시하고, 이 보간점을 자료점으로 하여 반분산으로 부터 유도된 크리깅 법으로 측심선 사이에 위치한 정규격자점의 수심을 보간하였다. 이와같은 계층적 보간법은 음향측심 자료에 있어서 기존의 이동평균법이나 크리깅법에 비해 정확도 향상과 보간소요시간절감 효과를 보였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.11-17
• /
• 2003

The new multi-dimensional higher order interpolation scheme called MHIS is developed. Firstly, multi-dimensional TVD condition is derived based on one-dimensional TVD condition. Using multi-dimensional TVD condition, 2nd, 3rd and 5th order MHIS are presented. By help of multi-dimensional TVD condition, it is possible to captured a discontinuity monotonically even in a multi-dimensional flow. It is verified through several test cases that the accuracy and the robustness of MHIS are enhanced in regions of shock discontinuities as well as boundary-layers.

• Structural Engineering and Mechanics
• /
• 제42권1호
• /
• pp.39-53
• /
• 2012

This paper presents an alternative way to derive the exact element stiffness matrix for a beam on Winkler foundation and the fixed-end force vector due to a linearly distributed load. The element flexibility matrix is derived first and forms the core of the exact element stiffness matrix. The governing differential compatibility of the problem is derived using the virtual force principle and solved to obtain the exact moment interpolation functions. The matrix virtual force equation is employed to obtain the exact element flexibility matrix using the exact moment interpolation functions. The so-called "natural" element stiffness matrix is obtained by inverting the exact element flexibility matrix. Two numerical examples are used to verify the accuracy and the efficiency of the natural beam element on Winkler foundation.