• Composites Research
• /
• 제19권1호
• /
• pp.1-8
• /
• 2006

적층 복합재료에 가해지는 저속충격에 의한 동적 거동 및 손상의 예측은 복합재 구조물의 설계에 중요한 문제가 되고 있다. 특히 저속충격에 의한 손상을 기술하기 위하여 적층판 내의 면내응력 뿐만 아니라 층간응력이 중요한 역할을 하는데, 기존의 전통적인 접근 방법은 이들을 효과적으로 기술하지 못하는 단점이 있다 본 논문에서는 이러한 동적거동 및 손상을 기술하기 위한 수치해석 모델로서 내부 미시구조를 고려한 직접수치모사(DNS)방법을 이용하여 DNS 모델을 구성하였다. 그리고 이를 저속충격 문제에 적용하여 저속충격에 의한 동적 거동 및 재료내의 층간응력 해석을 미시적으로 접근하였다. 이때 기존의 거시적인 접근 방법에 따른 균질모델의 결과와 비교 해석을 보였다. 한편 복합재료 적층판의 효율적인 저속충격해석을 위하여 DNS 개념을 적용한 멀티스케일 모델을 개발하여 기존의 균질화된 모델에서 보일 수 없었던 충격 부위의 국부적인 동적 거동을 효과적으로 기술하였다.

• Composites Research
• /
• 제17권1호
• /
• pp.29-37
• /
• 2004

하니컴 샌드위치 복합재료(HSC) 구조물은 높은 강성 및 경량화가 요구되는 항공ㆍ우주 및 군수 산업 등에 폭 넓게 이용되고 있으며 하니컴 샌드위치 복합재료의 정확한 강도 해석에 있어서 하니컴 코어의 기계적 물성 예측이 필요하다. 본 연구에서는 하니컴 코어 벽의 굽힘, 축 방향 및 전단 변형을 고려한 에너지 법을 사용하여 하니컴 코어 재료의 각 방향 탄성계수 및 포아송 비와 같은 기계적 물성 값을 구하기 위한 예측식을 유도하고, 이 이론 예측값이 유한요소 해석 프로그램인 ABAQUS 6.3을 이용하여 구한 결과와 거의 일치하고 있음을 알았다. 또한 하니컴 샌드위치 복합재료 평판의 인장 실험 및 유한요소 시뮬레이션을 수행하여 변형 거동 예측 및 층간 응력을 해석하였다. 하니컴 코어층과 표면층 사이의 전단 응력의 증가는 HSC 평판의 층간분리 현상의 주원인임을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.192-197
• /
• 2004

The anisotropy in coefficient of thermal expansion (CTE) between the in-plane and out-of-plane of 3-dimensional thick composite structures induces residual stresses and the large void content due to insufficient compaction of fabric composites, which results in low interlaminar strengths. In order to reduce the through thickness CTE and the void content, in this work, carbon fabric phenolic laminates were compacted by pressure generated by autoclave and a compressive jig, from which the through-thickness CTEs and the void contents were measured. From the measurement, it was found that the through-thickness CTE and the void content had different characteristics from ordinary composites due to gas produced during the cure reaction of phenolic resin.

• Advances in aircraft and spacecraft science
• /
• 제9권6호
• /
• pp.507-523
• /
• 2022

This study is aimed to accurately predict the vibration response of two types of functionally graded sandwich plates, one with FGM core and another with FGM face sheets. The gradation in FGM layer is quantified by exponential method. An efficient zig-zag theory is used and the zigzag impacts are established via a linear unit Heaviside step function. The present theory fulfills interlaminar transverse stress continuity at the interface and zero condition at the top and bottom surfaces of the plate for transverse shear stresses. Nine-noded C-0 FE having 8DOF/node is utilized throughout analysis. The present model is free from the obligation of any penalty function or post-processing technique and hence is computationally efficient. Numerical results have been presented on the free vibration behavior of sandwich FGM for different end conditions, lamination schemes and layer orientations. The applicability of present model is confirmed by comparing with published results. Several new results are also specified, which will serve as the benchmark for future studies.

• Composites Research
• /
• 제14권1호
• /
• pp.8-14
• /
• 2001

복합재 적층판의 자유단 층간분리의 모드별 변형률 에너지 해방률을 구하는 간이 계산법을 제안하였다. 층간응력은 층간에서의 평형식으로부터 층간의멘트와 층간전단력으로 평가하였다. 적층판 자유단 층간분리의 변형은 일반화된 준3차원 고전적층이론에 의하여 계산하였다. 이 간이 계산법은 변형균 에너지 해방률의 세성분을 구하는 간편한 식으로 나타내었다 복합재 적층판이 일축인장을 받는 경우에 대하여 적층판 중앙면에 대칭과 비대칭인 층간분리가 발생한 경우에 대하여 해석을 행하였다. 해석결과는 가상분리진전법에 의한 유한요소해석결과와 잘 일치하였다.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.423-429
• /
• 1997

A simplified method for determining the mode components of the strain energy release rate of free-edge delaminations in laminated composite is proposed. The interlaminar stresses are evaluated as an interface moment and interface shear forces that are obtained from the equilibrium equations at the interface between the adjacent layers. Deformation of an edge-delaminated laminate is calculated by using a generalized quasi-three dimensional classical laminated plate theory developed by the authors. The analysis provides closed-form expression for the three components of the strain energy release rate. Comparison of results with a finite element solution using the virtual crack closure technique shows good agreement. In the present study, laminated composite with stacking sequences of [30/-30/90]$_{s}$ were examined. The simple nature of the method makes it suitable for primary design analysis for the delaminations of laminated composite.e.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.317-326
• /
• 1997

An investigation was performed to study the matrix cracking and delamination in laminated composite plates due to transverse impact. A model was developed for predicting the initiation of the matrix cracking and the shape and size of impact-induced delamination in laminated composite plates resulting from the ballistic impact. The model consists of a stress analysis and a failure analysis. A transient finite element analysis which was based on the higher-order shear deformation theory was adopted for calculating the stresses inside the laminated composite plates during impact. A failure analysis was used to predict the initial intraply matrix cracking and the shape and size of the interface delamination in the laminates. As a results, a shear matrix cracking which was governed by the transverse interlaminar shear stress occured at the middle layer near the midplane of laminates and a bending matrix cracking which was governed by the transverse inplane stress occured at the bottom layer near the surface of laminates. In a thick laminates, a shear matrix cracking generated first at the middle layer of laminates, but in a thin laminates, a bending matrix cracking generated first at the bottom layer of laminates.

• Composites Research
• /
• 제12권1호
• /
• pp.28-36
• /
• 1999

본 연구에서는 얇은 탄소섬유/에폭시 복합적층판(두께 1mm)의 냉각열응력으로 인한 자유경계단 근처의 파손을 유한요소 수치해석과 초음파 C-scan, 광학 및 전자현미경 관찰을 통하여 검토하였다. 수치해석 결과, 복합적층판의 자유단 근처의 내부층에서 층냄 및 층간응력이 크게 나타났다. 액체질소에 의한 저온담금질 실험결과, 적층강도가 $[0_2/90_2]_s,\;[45_2/-45_0]_s,\;[0_2/60_2]_s$인 적층판의 층간근처의 내부층 쪽에서만 모재 및 계면부에서 진전하는 층내균열이 발생하였다. 이들 결과는 위의 수치해석 결과와 일치했다.

• Advanced Composite Materials
• /
• 제17권4호
• /
• pp.373-407
• /
• 2008

This paper will examine the possibilities of the virtual tests of composite structures by simulating mechanical behaviors by using supercomputing technologies, which have now become easily available and powerful but relatively inexpensive. We will describe mainly the applications of large-scale finite element analysis using the direct numerical simulation (DNS), which describes composite material properties considering individual constituent properties. DNS approach is based on the full microscopic concepts, which can provide detailed information about the local interaction between the constituents and micro-failure mechanisms by separate modeling of each constituent. Various composite materials such as metal matrix composites (MMCs), active fiber composites (AFCs), boron/epoxy cross-ply laminates and 3-D orthogonal woven composites are selected as verification examples of DNS. The effective elastic moduli and impact structural characteristics of the composites are determined using the DNS models. These DNS models can also give the global and local information about deformations and influences of high local in-plane and interlaminar stresses induced by transverse impact loading at a microscopic level inside the materials. Furthermore, the multi-scale models based on DNS concepts considering microscopic and macroscopic structures simultaneously are also developed and a numerical low-velocity impact simulation is performed using these multi-scale DNS models. Through these various applications of DNS models, it can be shown that the DNS approach can provide insights of various structural behaviors of composite structures.

• 한국정밀공학회지
• /
• 제12권11호
• /
• pp.98-109
• /
• 1995

An investigation was performed to study the inner damage of laminated composite plates subjected to out-of-plane load. During the investigation, inpact velocity and equivalent static load relationship was derived. Reddy's higher-order shear deformation theory(HSDT) and Hashin's failure criteria were used to determine inner stresses and damaged area. And impact testing was carried out on laminated composite plates by air gun type impact testing machine. The CFRP specimens were composed of [ .+-. 45 .deg. ]$_{4}$and [ .+-. 45 .deg. /0 .deg. /90 .deg. ]$_{2}$ stacking sequences with 0.75$^{t}$ * 26$^{w}$ * 100$^{l}$ (mm) dimension. After impact testing. As a result, a relationship holds between damaged area and impact energy, and a matrix cracking was caused by the interlaminar shear stress in the middle ply and was caused by the inplane transverse stress in the bottom ply.