Composites Research

The Korean Society for Composite Materials (한국복합재료학회)
권호 표지
DOI QR코드

DOI QR Code

Direct Numerical Simulation of Composite laminates Under low velocity Impact

저속충격을 받는 적층복합재료 평판의 직접 수치모사

  • 지국현 (서울대학교 기계공학부 대학원) ;
  • 김승조 (서울대학교 기계공학부,비행체특화센터)
  • Published : 2006.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Prediction of damage caused by low-velocity impact in laminated composite plate is an important problem faced by designers using composites. Not only the inplane stresses but also the interlaminar normal and shear stresses playa role in estimating the damage caused. But it is well known that the conventional approach based on the homogenization has the limit in description of damage. The work reported here is an effort in getting better predictions of dynamic behavior and damage in composite plate using DNS approach. In the DNS model, we discretize the composite plates through separate modeling of fiber and matrix for the local microscopic analysis. In the view of microscopic mechanics with DNS model, interlaminar stress behaviors in the inside of composite materials are investigated and compared with the results of the homogenized model which has been used in the conventional approach to impact analysis. Also the multiscale model based on DNS concept is developed in order to enhance the effectiveness of impact analysis, and we present the results of multiscale analysis considering micro and macro structures simultaneously.

적층 복합재료에 가해지는 저속충격에 의한 동적 거동 및 손상의 예측은 복합재 구조물의 설계에 중요한 문제가 되고 있다. 특히 저속충격에 의한 손상을 기술하기 위하여 적층판 내의 면내응력 뿐만 아니라 층간응력이 중요한 역할을 하는데, 기존의 전통적인 접근 방법은 이들을 효과적으로 기술하지 못하는 단점이 있다 본 논문에서는 이러한 동적거동 및 손상을 기술하기 위한 수치해석 모델로서 내부 미시구조를 고려한 직접수치모사(DNS)방법을 이용하여 DNS 모델을 구성하였다. 그리고 이를 저속충격 문제에 적용하여 저속충격에 의한 동적 거동 및 재료내의 층간응력 해석을 미시적으로 접근하였다. 이때 기존의 거시적인 접근 방법에 따른 균질모델의 결과와 비교 해석을 보였다. 한편 복합재료 적층판의 효율적인 저속충격해석을 위하여 DNS 개념을 적용한 멀티스케일 모델을 개발하여 기존의 균질화된 모델에서 보일 수 없었던 충격 부위의 국부적인 동적 거동을 효과적으로 기술하였다.

Keywords

References

  1. Abrate, S., 'Impact on Laminated Composite Supported materials,' Applied Mechanics Review, Vol. 44, 1991, pp. 155-190 https://doi.org/10.1115/1.3119500
  2. Cantwell, W.J. and Morton, J., 'The Impact Resistance of Composite Materials - a Review,' Composites, Vol. 22, No.5, 1991, pp. 347-362 https://doi.org/10.1016/0010-4361(91)90549-V
  3. Liu, D., Sun, C.T., and Malvern, L.E., 'Structural Degradation of Impacted Graphite/Epoxy Laminates,' The 56th Shock & Vibration Bulletin, 1986, pp. 51-60
  4. Madan, R.C., 'Influence of Low-Velocity Impact on Compoiste Structures,' Composite Materials: Fatigue and Fracture, Vol. 3, ASTM STP 1110, 1991, pp. 457-475
  5. Cristescu, N., Malvern, L.E., and Sierakowski, R.L., 'Failure Mechanics in Composite Plates Impacted by Blunt-Ended Penetrator,' ASTM STP 568, 1975, pp. 159-172
  6. Clark, G. 'Modeling of Impact Damage in Composite Laminates,' Composites, Vol. 20, 1989, pp. 209-214 https://doi.org/10.1016/0010-4361(89)90335-2
  7. D.Liu, 'Impact-Induced Delamination - A view of Bending Stiffness Mismatching,' Journal of Composite Materials, Vol. 22, July 1988, pp. 674-692 https://doi.org/10.1177/002199838802200706
  8. Chang, F.K., Choi, H.Y. and Jeng, S.T., 'Study on Impact Damage in Laminated Composites,' Mechanics of Materials, Vol. 10, 1990, pp. 83-95 https://doi.org/10.1016/0167-6636(90)90019-C
  9. Aboudi, J., Mechanics of Composite Materials: A Unified Micro-Mechanical Approach, Elsevier, New York, 1991
  10. Sun, C.T. & Vaidya, R.S., 'Prediction of Composite Properties from a Representative Volume Element,' Composites Science and Technology, Vol. 56, 1996, pp. 171-179 https://doi.org/10.1016/0266-3538(95)00141-7
  11. Kim, S.,J., Lee, C.S., Yeo, HJ., Kim, J.H. and Cho, J.Y., 'Direct Numerical Simulation of Composite Structures,' Journal of Composite Materials, Vol. 36, No. 24, 2002, pp. 2765-2785 https://doi.org/10.1177/002199802761675610
  12. Pagano, N.J. and Hatfield, S.J., 'Elastic Behavior of Multilayered Bidirectional Composites,' AIAA Journal, Vol. 10, 1972, pp. 931-933 https://doi.org/10.2514/3.50249
  13. Lajczok, M.R., 'New Approach in the Determination of Interlaminar Shear Stresses from the Results of MSC/NASTRAN,' Computers and Structures, Vol. 24, 1986, pp. 651-656 https://doi.org/10.1016/0045-7949(86)90204-X
  14. Tolson, S. and Zabaras, N., 'Finite Element Analysis of Progressive Failure in Laminated Composite Plates,' Computers and Structures, Vol. 38, 1991, pp. 361-376 https://doi.org/10.1016/0045-7949(91)90113-Z
  15. Lo, K.H., Christensen, R.M. and Wu, E.M., 'Stress Solution Determination for Higher Order Plate Theory,' IJSS, Vol. 14, 1978, pp. 655-662
  16. Redd, J.N., 'A Refined Nonlinear Theory of Plates with Transverse Shear Deformation,' IJSS, Vol. 20, 1984, pp. 881-896
  17. LS-DYNA3D User's Manual ver.936, Livermore Software Technology Corporation, 1995
  18. Ji, K.H., Paik, S.H, and Kim,S.J., 'Impact and Failure Analysis of Composite Plates by Multiscale modeling,' 14th ICCM, July 2003, San Diego, CA, USA