• 복식
• /
• 제50권6호
• /
• pp.47-58
• /
• 2000

This paper analyses the geometric aspect of Soma Delaunay's works on the basis of design elements and principles. Geometric pattern is one of the distinct features of early 20th century avant-garde works. The significance of its pattern and colour comes from the fact that it has not only influenced the contemporary fine art but also offered the basic principle of modern costume design. In 1925 she was designing clothes which could be worn today without appearing old-fashioned. She foresaw the future trends in fashion and interior decoration, One might claim she belongs to the avant-garde even today and no less astonishing a phenomenon than she was in 1925. Soma Delaunay's art was one of the first expressions of abstract painting and her "simultaneous contrasts"are among the earliest example of the aesthete. In Delaunay's geometric abstraction it is found that the technique of"simultaneous contrasts" is exploited almost without exception. colour as well as collage was the favourite technique Delnaunay used in creating a distinct simultaneity, Many "inobjective" paintings as she herself called unite the rigour of simple geometric forms with an inner life and poetry which emanate from the richness of the colour, the musicality of the rhythm, the vibrant breadth of the execution.rant breadth of the execution.

• 한국축산식품학회지
• /
• 제36권4호
• /
• pp.538-546
• /
• 2016

This study was carried out to evaluate the effects of fat level on the microwave cooking properties of ground pork patties with NaCl (1.5%). Ground pork patties were processed from pork hams to achieve fat levels of 10%, 15%, 20%, and 25%, respectively. Each patty was cooked from a thawed state to 75℃ in a microwave oven at full power (700 W). After microwave cooking, protein content, moisture content, fat retention, and shear force values in patties decreased as fat level increased from 10 to 25%. As fat level increased, cooking time decreased but total cooking loss and drip loss were increased, whereas slight differences in diameter reduction and thickness of patties were observed. In raw patties, 10% fat patties had lower L* values and higher a* values compared to patties with more fat, but these differences were reduced when patties were cooked. Patties with 10% fat showed a more pink color on the surface and interior than patties with a higher fat content but more air pockets were noted in higher-fat patties. Higher-fat patties were more tender, juicy, and oily than lower-fat patties.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.724-729
• /
• 2009

Generally the window of the building is an objective of mining and having a distant view and also for a circulation it will can open and shut because becomes the structure insulation, the meat detailed drawing it does a very difficult portion, it is. To reduce the loss of the energy which leads, to an air conditioning energy and an expense increase problem the color which the interior furniture and the clothing due to the augmentation and the corpse ultraviolet rays of the unpleasant feeling which is caused by with the transient one solar energy influx which leads the window will burn, it joins in the window and it confronts and the novel solution is demanded.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.43-51
• /
• 2015

This research was performed to investigate the quality of leaflets provided with newspapers. The leaflets were classified according to business types and regions. The physical and strength properties were analyzed. The sizes of leaflets were 2, 4, 8 jeoljis of crown octavo, A3, A4, A5, and B3, B4, B5. Most of them were color printed and both-sides printing was much more popular than one-side printing. The leaflets about electronics, educations, and clothing showed lower density than restaurant business and other areas. The leaflets of electronics, educations, and clothing, and large stores showed lower tensile strength, and those of restaurant businesses and building trades showed relatively high tensile strengths. No differences on the quality of leaflets except for large stores were found according to business areas. Large markets made the leaflets with various types of papers, and low quality papers were also included.

• 한국가구학회지
• /
• 제13권1호
• /
• pp.71-83
• /
• 2002

This study was carried out to develop colored-wood furniture using veneer, small-round log and fiberboard to protect forest resources through the study of minimalism. which advocates the environmental issue inherent to contemporary furniture in the postmodern era. Based on the historical and theoretical context of minimalism closely related to the environmental protection, this study suggested the technical way how to produce the environment-friendly furniture with the least use of valuable and natural log. Finally, the color-wooden furniture was developed based on the asceticism, simplification, and repetition of the minimalism in a trend of contemporary furniture design. By soaking a veneer, Psuedotsuga menziesii and small-round log, Pinus densiflora into a very-diluted organic dye, the environment-friendly and colored-wood furniture could be created in harmony with contemporary interior space, which has showed various colors such as yellow, blue, red, and green with a pastel tone. The spring wood of the colored softwood was deeply stained, while the summer wood was lightly done. By utilizing such valueless used woods which have been little in furniture production, it was possible to decrease the consumption of precious raw log such as zelkova, ebony, rose, maple, cherry, mahogany and so on. Thus, it became obvious to be able for contemporary furniture designers to produce beautiful furniture with dyed fiberboard and small-round logs pregnant with minimalism.

• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.77-85
• /
• 2010

본 논문은 LED 램프를 사무소 건물에 효과적으로 사용하기 위하여 새로운 통합적 에너지 시뮬레이션을 수행한 연구 결과이다. 일반적으로 LED 램프는 다른 램프에 비하여 에너지 절감효과가 매우 우수하지만 현재 형광램프보다 낮은 광속과 좁은 광분포 등 아직 사무소 건물에 적용하기는 다각적인 검토가 필요하다. 연구결과 냉난방에너지가 20[%] 증가하고 현재 형광등을 대체하기 위해서는 90[lm/$m^2$] 이상으로 설계해야 한다. 따라서 LED램프를 사무소 건물에 적용하기 위해서 광에너지, 냉난방에 미치는 영향 및 사무실환경에 미치는 광분포를 통합적으로 해석하였으며 앞으로 이 결과는 LED 램프를 통한 효과적인 에너지절약 환경을 구축하는 데 중요한 자료를 제공할 것으로 확신한다.

• 디자인학연구
• /
• 제12권4호
• /
• pp.251-262
• /
• 1999

본 연구는 장애인의 이용도가 높은 환경을 개선하고자 하는 궁극목표를 위한 단계적 연구 중 '국외법규 고찰 및 사례분석'에 관한 것이다. 이를 위해 장애인 복지에 관한 규범과 기술적인 기초를 북구에서 가장 먼저 미련하였던 스웨덴을 연구대상으로 하여 건축법규와 장애인 관련 지침을 고찰하고 스톡홀름과 오슬로의 교통시설의 환경디자인 요소를 분석하였다. 그 결과, 스웨덴의 건축법규(BBR 94)는 그 기본 개념이 접근성 안정성 효율성에 있으나, 의무사항으로 규정된 항목이 매우 적고 구체적인 세부지침도 미흡하였으며, 국립 스웨덴 장애인 연구소에서 더욱 상세한 세부지침을 제공하고 있었다. 사례분석 결과,4개의 대상시설이 정도와 방법의 차이는 있으나 건축법규에서 의무화하거나 권장하고 있는 사항보다 실내 환경에서의 접근성 적용성 안정성 이동성 지원성에서 치수 색채 재료 조명 등의 세부요소를 이용하여 다양하게 해결안을 모색하고 있는 것으로 평가되었다.

• 펄프종이기술
• /
• 제40권1호
• /
• pp.23-28
• /
• 2008

Functional hanji was manufactured using the bast fiber of Broussonetia kazinoki and various inorganic compounds such as kaolin, talc, elvan, and ocher, and the physical and optical properties were investigated. The residual percentages of kaolin, talc, elvan and ocher in the functional hanji were above 50%. The density of the hanji increased with the increase of the content of inorganic compounds. The hanji manufactured using ocher showed the highest density. The breaking length and burst factor decreased with the increase of inorganic materials, indicating that physical properties of hanji were not improved by adding inorganic materials. The emission rates of far-infrared radiation increased in the hanji manufactured using inorganic materials. The higher emission rates were observed in the hanji with elvan or ocher. Addition of inorganic compounds to hanji showed the flame retardative effect. The colorfastness to light of the hanji with elvan or ocher was the degree of 4, which explained by the characteristic color of the inorganics.

• 펄프종이기술
• /
• 제43권1호
• /
• pp.1-10
• /
• 2011

To investigate the combination dyeing properties of natural dyes, the combination dyeing using gallnut,-Al, Cu, Fe-sappan wood, and gallnut-Al, Cu, Fe-gardenia was performed on bast fiber of mulberry, cotton, silk, and their K/S values, colors, and sunlight fastness were measured. The gallnut-Al, Cu, Fe-gardenia dyeing showed the highest K/S values when the dyeing concentration of gallnut is 3%. It tended to show the higher K/S values than gallnut-Al, Cu, Fe-sappan wood. The silk showed the highest values of in K/S, and then followed by cotton, and bast fiber of mulberry. The mordants developed different colors on the bast fiber and the cotton treated with gallnut-Al, Cu, Fe-sappan wood. However, the silk showed a series of YR, showing no effect of the mordants on the development of color. The combination dyeing of gallnut-Al, Cu, Fe-gardenia showed a series of Y. The results showed that sappan wood could develop various colors but gardenia could develop a series of Y. No distinct improvement on sunlight fastness of the combination dyeing was observed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.138-139
• /
• 2020

With the rapid progress of industrialization, indoor air quality is a very important factor for modern people who spend most of their day indoors. The recent issue of fine dust and radon on the portal site's popularity search shows that interest in indoor air quality has increased. Fine dust causes respiratory diseases, and radon causes severe lung cancer. The new material was tested using plant activated carbon, palm activated carbon and bamboo activated carbon. Both palm activated carbon and bamboo activated carbon are porous materials and generate smooth physical adsorption. As a result of the experiment, both the activated carbon tends to gradually decrease in strength and fluidity as the replacement ratio increases. The reason for this is that both activated carbons have the property of absorbing moisture, so it is judged that the strength is lowered by absorbing moisture necessary for curing. In the case of fluidity, it is judged that the fluidity is reduced by absorbing the moisture required for the flow. In the future, if the problem of the color of the finished cured body is compensated, it will be possible to manufacture a functional finishing board to replace the existing interior finishing material.