• 대한치과보철학회지
• /
• 제58권3호
• /
• pp.217-220
• /
• 2020

발치 후 고정성 지르코니아 보철물을 제작하는 경우 통상적으로 임시레진 보철물을 수작업으로 제작하고 보철단계에서 인상채득하여 최종 보철물을 제작한다. 이러한 전통적인 방식은 임시보철물과 최종 보철물 사이의 연계가 부족하고 결과의 심미적 기능적 예측성이 낮을 수 있다. 현재 CAD/CAM 방식의 보철물 제작과 관련 디지털 기술이 발전하여 진료에서 다양하게 활용되고 있다. 본 증례에서 발치 후 고정성 단일구조 지르코니아 보철물을 계획하는 경우 CAD/CAM 방식 임시보철물, 발치와 치유 후의 구내스캔, 컴퓨터 영상중첩술을 이용하여 최적의 가공치 적합도를 가지며 치료의 결과 예측도가 향상된 디지털 방식을 소개하고자 한다.

• The Journal of Advanced Prosthodontics
• /
• 제13권3호
• /
• pp.144-151
• /
• 2021

PURPOSE. The purpose of this in vitro study was to investigate the wear resistance and surface roughness of three interim resin materials, which were subjected to chewing simulation. MATERIALS AND METHODS. Three interim resin materials were evaluated: (1) three-dimensional (3D) printed (digital light processing type), (2) computer-aided design and computer-aided manufacturing (CAD/CAM) milled, and (3) conventional polymethyl methacrylate interim resin materials. A total of 48 substrate specimens were prepared. The specimens were divided into two subgroups and subjected to 30,000 or 60,000 cycles of chewing simulation (n = 8). The wear volume loss and surface roughness of the materials were compared. Statistical analysis was performed using one-way analysis of variance and Tukey's post-hoc test (α=.05). RESULTS. The mean ± standard deviation values of wear volume loss (in mm³) against the metal abrader after 60,000 cycles were 0.10 ± 0.01 for the 3D printed resin, 0.21 ± 0.02 for the milled resin, and 0.44 ± 0.01 for the conventional resin. Statistically significant differences among volume losses were found in the order of 3D printed, milled, and conventional interim materials (P<.001). After 60,000 cycles of simulated chewing, the mean surface roughness (Ra; ㎛) values for 3D printed, milled, and conventional materials were 0.59 ± 0.06, 1.27 ± 0.49, and 1.64 ± 0.44, respectively. A significant difference was found in the Ra value between 3D printed and conventional materials (P=.01). CONCLUSION. The interim restorative materials for additive and subtractive manufacturing digital technologies exhibited less wear volume loss than the conventional interim resin. The 3D printed interim restorative material showed a smoother surface than the conventional interim material after simulated chewing.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.265-270
• /
• 2017

PURPOSE. This study is to evaluate the internal fit of the crown manufactured by CAD/CAM milling method and 3D printing method. MATERIALS AND METHODS. The master model was fabricated with stainless steel by using CNC machine and the work model was created from the vinyl-polysiloxane impression. After scanning the working model, the design software is used to design the crown. The saved STL file is used on the CAD/CAM milling method and two types of 3D printing method to produce 10 interim crowns per group. Internal discrepancy measurement uses the silicon replica method and the measured data are analyzed with One-way ANOVA to verify the statistic significance. RESULTS. The discrepancy means (standard deviation) of the 3 groups are $171.6\;(97.4){\mu}m$ for the crown manufactured by the milling system and 149.1 (65.9) and $91.1\;(36.4){\mu}m$, respectively, for the crowns manufactured with the two types of 3D printing system. There was a statistically significant difference and the 3D printing system group showed more outstanding value than the milling system group. CONCLUSION. The marginal and internal fit of the interim restoration has more outstanding 3D printing method than the CAD/CAM milling method. Therefore, the 3D printing method is considered as applicable for not only the interim restoration production, but also in the dental prosthesis production with a higher level of completion.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.27.1-27.12
• /
• 2019

This case report describes a technique in which endodontic treatment and permanent indirect restoration were completed in the same clinical appointment with the aid of a computer-aided design/computer-aided manufacturing (CAD/CAM) system. Two patients were diagnosed with irreversible pulpitis of the mandibular first molar. After access preparation, root canals were located, irrigation was performed until bleeding ceased, and the coronal tooth structure was prepared for indirect restoration. Then, utilizing an interim 3-mm build-up of the endodontic access cavity, a hemi-arch digital scan was performed with an intraoral scanner. Subsequent to digital scanning, restoration design was performed simultaneously with the endodontic procedure. The root canals were shaped using the Race system under irrigation with 2.5% sodium hypochlorite followed by root canal filling. The pulp chamber was subsequently filled with a 3-mm-thick composite resin restoration mimicking the interim build-up previously utilized to facilitate block milling in the CAD/CAM system. Clinical try-in of the permanent onlay restoration was followed by acid etching, application of a 5th generation adhesive, and cementation of the indirect restoration. Once the restoration was cemented, rubber dam isolation was removed, followed by occlusal adjustment and polishing. After 2 years of follow-up, the restorations were esthetically and functionally satisfactory, without complications.

• The Journal of Advanced Prosthodontics
• /
• 제13권2호
• /
• pp.71-78
• /
• 2021

Purpose. This study aims to compare the volumetric change, degree of conversion (DOC), and cytotoxicity of 3D-printed restorations post-cured under three different conditions. Materials and Methods. 3D-printed interim restorations were post-cured under three different conditions and systems: 5 min, 30 min, and 24 h. Three-unit and six-unit fixed dental prostheses (n = 30 for each case) were printed; ten specimens from each group were post-cured and then scanned to compare their volumetric changes. Root-mean-squared (RMS) values of the data were acquired by superimposing the scanned files with original files. Thirty disk-shaped specimens were printed to evaluate the DOC ratio. Fourier transform infrared spectroscopy was used to compare the DOCs of 10 specimens from each group. Human gingival fibroblasts were used to measure the cell viability of every specimen (n = 7). The data from this experiment were employed for one-way analysis of variance and Tukey's post-hoc comparisons. Results. Differences between the three-unit restorations were statistically insignificant, regardless of the post-curing conditions. However, for the six-unit restorations, a high RMS value was acquired when the post-curing duration was 30 min. The average DOC was approximately 56 - 62%; the difference between each group was statistically insignificant. All the groups exhibited cell viability greater than 70%, rendering them clinically acceptable. Conclusion. The post-curing conditions influenced the volume when the length of the restoration was increased. However, this deviation was found to be clinically acceptable. Additionally, post-curing did not significantly influence the DOC and cytotoxicity of the restorations.

• The Journal of Advanced Prosthodontics
• /
• 제14권6호
• /
• pp.360-368
• /
• 2022

PURPOSE. This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging. MATERIALS AND METHODS. Three groups of interim dental restorative materials (N = 20) were tested. The first group (CO) was fabricated using a conventional manual method. The second group (ML) was prepared from prefabricated resin blocks for the milling method and cut into specimen sizes using a cutting disc. The third group (3D) was additively manufactured using a digital light-processing (DLP) 3D printer. Aging acceleration treatments using toothbrushing and thermocycling simulators were applied to half of the specimens corresponding to three years of usage in the oral environment (N = 10). Surface roughness (Ra), Vickers microhardness, 3-point bending, sorption, and solubility tests were performed. A 2-way analysis of variance (ANOVA) and Fisher's multiple comparison test were used to compare the results among the groups. RESULTS. The mean surface roughness (Ra) of the resin after accelerated aging was significantly higher in the CO and ML groups than that before aging, but not in the 3D group. All groups showed reduced hardness after accelerated aging. The flexural strength values were highest in the 3D group, followed by the ML and CO groups after accelerated aging. Accelerated aging significantly reduced water sorption in the ML group. CONCLUSION. According to the tested material and 3D printer type, both 3D-printed and milled interim restoration resins showed higher flexural strength and modulus, and lower surface roughness than those prepared by the conventional method after accelerated aging.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.330-337
• /
• 2018

무치악 환자에게 임플란트 지지 고정성 보철수복 치료는 그 효용성이 검증되었으나, 복잡한 치료과정이 수반된다. 반면, 현대 치의학에서 디지털 기술력은 나날이 발전하여 현재 무치악 환자의 임플란트 수복치료까지 그 범위를 확장하였다. 본 증례에서는 66세 하악 무치악 환자의 임플란트 고정성 보철 수복에 대하여 진단부터 수술, 임시수복물 및 최종수복물의 디자인과 제작까지 디지털 시스템을 모든 단계에 이용하였다. 수술 전 진단단계에서 구강스캐너를 이용한 점막스캔과 환자의 안정적인 기존 총의치 교합을 토대로 임시수복물을 디자인하였다. 수술가이드를 이용하여 무절개 임플란트 식립 후에 사전제작한 임시수복물을 임플란트와 연결하여 즉시 임시수복물로써 사용하였다. 디지털 기술을 이용하여 안정적인 교합이 형성된 임시수복물의 수직고경과 중심위를 이전하여 최종수복물을 디자인 및 제작 하였다. 디지털 기술을 활용하여 환자의 수직고경과 교합을 보전하는 방법을 사용함으로써 무치악환자에서 복잡할 수 있는 임플란트 치료의 간단한 프로토콜을 정립하였기에 보고하는 바이다.

• 구강회복응용과학지
• /
• 제32권2호
• /
• pp.135-140
• /
• 2016

사고로 인하여 갑자기 치아를 상실하게 된 환자에게 정신적 안정, 심미성과 기능을 회복하기 위하여 빠른 임시 보철물 수복이 필요하다. 본 증례는 외상으로 인하여 예상치 못한 치아 상실이 발생한 환자에게 열형성 기술(thermoforming technique)을 이용한 수복을 시행하여 만족할 만한 결과를 얻었기에 보고하는 바이다.

• The Journal of Advanced Prosthodontics
• /
• 제4권4호
• /
• pp.243-247
• /
• 2012

The velopharynx is a tridimensional muscular valve located between the oral and nasal cavities, consisting of the lateral and posterior pharyngeal walls and the soft palate, and controls the passage of air. Velopharyngeal insufficiency may take place when the velopharyngeal valve is unable to perform its own closing, due to a lack of tissue or lack of proper movement. Treatment options include surgical correction, prosthetic rehabilitation, and speech therapy; though optimal results often require a multidisciplinary approach for the restoration of both anatomical and physiological defect. We report a case of 56 year old male patient presenting with hypernasal speech pattern and velopharyngeal insufficiency secondary to cleft palate which had been surgically corrected 18 years ago. The patient was treated with a combination of speech therapy and palatal lift prosthesis employing interim prostheses in various phases before the insertion of definitive appliance. This phase-wise treatment plan helped to improve patient's compliance and final outcome.

• 환경영향평가
• /
• 제18권6호
• /
• pp.411-417
• /
• 2009

Lately the master plan for the Four Major Rivers Restoration Project has been released by the Ministry of Land and Maritime Affairs and relevant ministries. According to the master plan compared with the interim report made on 15 December 2008, the number of weirs for irrigation has increased from 5 to 16, the amount of dredging has increased from 220 million cubic metres to 570 million cubic metres, and the total cost estimated has increased from 14 trillion won to 22 trillion won. A critical review of the master plan by some research group will be summarized focused upon budget, objectives, securing water resource, dredging, and flood control etc. After various experts' forums and field surveys, it is concluded that the government should implement a joint-research program on assessing the impact of the project together with experts and citizens' groups as co-partners, in order to truly save or restore the four major rivers.