The Journal of Korean Academy of Prosthodontics (대한치과보철학회지)

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지
DOI QR코드

DOI QR Code

Digital approach for fabrication of zirconia restoration with optimal gingival adaptation after tooth extraction: A case report

발치 후 지르코니아 보철물 제작에서 최적의 연조직 적합 형성을 위한 디지털 치료 증례

  • Mai, Hang Nga (Institute for Translational Research in Dentistry, Kyungpook National University) ;
  • Lee, Du-Hyeong (Institute for Translational Research in Dentistry, Kyungpook National University)
  • 마이항나 (경북대학교 치과대학 치과보철학교실) ;
  • 이두형 (경북대학교 치과대학 치과보철학교실)
  • Received : 2019.10.24
  • Accepted : 2019.12.11
  • Published : 2020.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

Conventionally, when a zirconia fixed dental restoration is planned, the interim restoration is made manually and the final restoration is fabricated by the silicone impression taking at the prosthodontic stage. This conventional workflow does not provide direct relation between interim and final restorations. Moreover, the predictability of the final restoration could be low. Nowadays, the CAD/CAM based restoration fabrication and related digital techniques are developed and being applied in dentistry in multiple ways. This case report introduces a digital workflow for fabricating an optimal gingival adaptation and predictability of monolithic zirconia restoration by using CAD/CAM interim restoration, intra oral scan, and image superimposition technique in a case that required tooth extraction.

발치 후 고정성 지르코니아 보철물을 제작하는 경우 통상적으로 임시레진 보철물을 수작업으로 제작하고 보철단계에서 인상채득하여 최종 보철물을 제작한다. 이러한 전통적인 방식은 임시보철물과 최종 보철물 사이의 연계가 부족하고 결과의 심미적 기능적 예측성이 낮을 수 있다. 현재 CAD/CAM 방식의 보철물 제작과 관련 디지털 기술이 발전하여 진료에서 다양하게 활용되고 있다. 본 증례에서 발치 후 고정성 단일구조 지르코니아 보철물을 계획하는 경우 CAD/CAM 방식 임시보철물, 발치와 치유 후의 구내스캔, 컴퓨터 영상중첩술을 이용하여 최적의 가공치 적합도를 가지며 치료의 결과 예측도가 향상된 디지털 방식을 소개하고자 한다.

Keywords

References

  1. Chappuis V, Araujo MG, Buser D. Clinical relevance of dimensional bone and soft tissue alterations post-extraction in esthetic sites. Periodontol 2000 2017;73:73-83. https://doi.org/10.1111/prd.12167
  2. Tallgren A. The continuing reduction of the residual alveolar ridges in complete denture wearers: a mixed-longitudinal study covering 25 years. 1972. J Prosthet Dent 2003;89:427-35. https://doi.org/10.1016/S0022-3913(03)00158-6
  3. Patras M, Naka O, Doukoudakis S, Pissiotis A. Management of provisional restorations' deficiencies: a literature review. J Esthet Restor Dent 2012;24:26-38. https://doi.org/10.1111/j.1708-8240.2011.00467.x
  4. Schmitz JH, Valenti M. Interim restoration technique for gingival displacement with a feather-edge preparation design and digital scan. J Prosthet Dent 2019 Jul 30. pii: S0022-3913(19)30341-5.
  5. Noh K, Kwon KR, Kim HS, Kim DS, Pae A. Accurate transfer of soft tissue morphology with interim prosthesis to definitive cast. J Prosthet Dent 2014;111:159-62. https://doi.org/10.1016/j.prosdent.2013.09.018
  6. Yilmaz B. A technique to transfer the contours of an interim implant restoration to the definitive cast. J Prosthet Dent 2015;113:645-7. https://doi.org/10.1016/j.prosdent.2015.01.015
  7. Tse RTO, Marchack BW. Injectable silicone-based gingival mask technique: Transferring the emergence profile of multiple implant restorations. J Prosthet Dent 2019;122:88-91. https://doi.org/10.1016/j.prosdent.2018.11.014
  8. Liu CL. Use of a modified ovate pontic in areas of ridge defects: a report of two cases. J Esthet Restor Dent 2004;16:273-81; discussion 282-3. https://doi.org/10.1111/j.1708-8240.2004.tb00052.x
  9. Lee JH, Lee CH. Completely digital approach to an ovate pontic. J Prosthet Dent 2016;115:792-4. https://doi.org/10.1016/j.prosdent.2016.01.005