Comparing volumetric and biological aspects of 3D-printed interim restorations under various post-curing modes |
Song, Gun
(Department of Conservative Dentistry, School of Dentistry, Chonnam National University)
Son, Ji-Won (Department of Conservative Dentistry, School of Dentistry, Dental Science Research Institute, Chonnam National University) Jang, Ji-Hyun (Department of Conservative Dentistry, School of Dentistry, Dental Science Research Institute, Chonnam National University) Choi, Sung-Hyeon (Department of Conservative Dentistry, School of Dentistry, Dental Science Research Institute, Chonnam National University) Jang, Woo-Hyung (Department of Prosthodontics, School of Dentistry, Chonnam National University) Lee, Bin-Na (Department of Conservative Dentistry, School of Dentistry, Dental Science Research Institute, Chonnam National University) Park, Chan (Department of Prosthodontics, School of Dentistry, Chonnam National University) |
1 | Reymus M, Fabritius R, KeBler A, Hickel R, Edelhoff D, Stawarczyk B. Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study. Clin Oral Investig 2020;24:701-10. DOI |
2 | Par M, Marovic D, Attin T, Tarle Z, Taubock TT. The effect of rapid high-intensity light-curing on micromechanical properties of bulk-fill and conventional resin composites. Sci Rep 2020;10:10560. DOI |
3 | Dawood A, Marti Marti B, Sauret-Jackson V, Darwood A. 3D printing in dentistry. Br Dent J 2015;219:521-9. DOI |
4 | Abduo J, Lyons K, Bennamoun M. Trends in computer-aided manufacturing in prosthodontics: a review of the available streams. Int J Dent 2014;2014:783948. DOI |
5 | Barazanchi A, Li KC, Al-Amleh B, Lyons K, Waddell JN. Additive technology: update on current materials and applications in dentistry. J Prosthodont 2017;26: 156-63. DOI |
6 | Quan H, Zhang T, Xu H, Luo S, Nie J, Zhu X. Photo-curing 3D printing technique and its challenges. Bioact Mater 2020;5:110-5. DOI |
7 | Seime L, Hardeberg JY. Characterisation of LCD and DLP projection displays. Color Imaging Conf Final Progr Proc 2002:277-82. |
8 | Tahayeri A, Morgan M, Fugolin AP, Bompolaki D, Athirasala A, Pfeifer CS, Ferracane JL, Bertassoni LE. 3D printed versus conventionally cured provisional crown and bridge dental materials. Dent Mater 2018; 34:192-200. DOI |
9 | van Noort R. The future of dental devices is digital. Dent Mater 2012;28:3-12. DOI |
10 | McGurk M, Amis AA, Potamianos P, Goodger NM. Rapid prototyping techniques for anatomical modelling in medicine. Ann R Coll Surg Engl 1997;79:169-74. |
11 | Favero CS, English JD, Cozad BE, Wirthlin JO, Short MM, Kasper FK. Effect of print layer height and printer type on the accuracy of 3-dimensional printed orthodontic models. Am J Orthod Dentofacial Orthop 2017; 152:557-65. DOI |
12 | Taft RM, Kondor S, Grant GT. Accuracy of rapid prototype models for head and neck reconstruction. J Prosthet Dent 2011;106:399-408. DOI |
13 | Goodacre BJ, Goodacre CJ, Baba NZ, Kattadiyil MT. Comparison of denture base adaptation between CAD-CAM and conventional fabrication techniques. J Prosthet Dent 2016;116:249-56. DOI |
14 | Steinmassl O, Dumfahrt H, Grunert I, Steinmassl PA. CAD/CAM produces dentures with improved fit. Clin Oral Investig 2018;22:2829-2835. DOI |
15 | Park SH, Lee CS. The difference in degree of conversion between light-cured and additional heat-cured composites. Oper Dent 1996;21:213-7. |
16 | Susila AV, Balasubramanian V. Correlation of elution and sensitivity of cell lines to dental composites. Dent Mater 2016;32:e63-72. DOI |
17 | Samanidou VF, Kerezoudi C, Tolika E, Palaghias G. A simple isocratic HPLC method for the simultaneous determination of the five most common residual monomers released from resin-based dental restorative materials. J Liq Chromatogr Relat Technol 2015; 38:740-9. DOI |
18 | Reymus M, Stawarczyk B. In vitro study on the influence of postpolymerization and aging on the Martens parameters of 3D-printed occlusal devices. J Prosthet Dent 2020;19:S0022-3913(20)30077-9. |
19 | Bourbia M, Ma D, Cvitkovitch DG, Santerre JP, Finer Y. Cariogenic bacteria degrade dental resin composites and adhesives. J Dent Res 2013;92:989-94. DOI |
20 | Reymus M, Lumkemann N, Stawarczyk B. 3D-printed material for temporary restorations: impact of print layer thickness and post-curing method on degree of conversion. Int J Comput Dent 2019;22:231-7. |
21 | Leloup G, Holvoet PE, Bebelman S, Devaux J. Raman scattering determination of the depth of cure of light-activated composites: influence of different clinically relevant parameters. J Oral Rehabil 2002;29:510-5. DOI |
22 | Kalberer N, Mehl A, Schimmel M, Muller F, Srinivasan M. CAD-CAM milled versus rapidly prototyped (3D-printed) complete dentures: an in vitro evaluation of trueness. J Prosthet Dent 2019;121:637-43. DOI |
23 | Kang SY, Park JH, Kim JH, Kim WC. Accuracy of provisional crowns made using stereolithography apparatus and subtractive technique. J Adv Prosthodont. 2018;10:354-60. DOI |
24 | Schaefer O, Watts DC, Sigusch BW, Kuepper H, Guentsch A. Marginal and internal fit of pressed lithium disilicate partial crowns in vitro: a three-dimensional analysis of accuracy and reproducibility. Dent Mater 2012;28:320-6. DOI |
25 | Lee BN, Hong JU, Kim SM, Jang JH, Chang HS, Hwang YC, Hwang IN, Oh WM. Anti-inflammatory and osteogenic effects of calcium silicate-based root canal sealers. J Endod 2019;45:73-8. DOI |
26 | Fuh J, Lu L, Tan C, Shen Z, Chew S. Processing and characterising photo-sensitive polymer in the rapid prototyping process. J Mater Process Technol 1999;89: 211-7. |
27 | Piedra-Cascon W, Sadeghpour M, Att W, Revilla-Leon M. A vat-polymerized 3-dimensionally printed dual-material occlusal device: a dental technique. J Prosthet Dent 2020;S0022-3913(20)30438-8. |
28 | Lin CH, Lin YM, Lai YL, Lee SY. Mechanical properties, accuracy, and cytotoxicity of UV-polymerized 3D printing resins composed of Bis-EMA, UDMA, and TEGDMA. J Prosthet Dent 2020;123:349-54. DOI |