• Proceedings of the Korean Society of Rheology Conference
• /
• 2002.05a
• /
• pp.25-27
• /
• 2002

In this study we investigated the reaction kinetics by a convenient but useful method-rheology to characterize the interface between two immiscible blends with a Reactive compatibilizer. Also, we made an attempt to correlate changes of interface roughness with rheological properties. The blend systems employed in this study was mono-carboxylated polystyrene (PS-mCOOH) and an poly(methyl methacrylate-ran-glycidylmethacrylate) (PMMA-GMA). PS-mCOOH was synthesized by an anionic polymerization and PMMA-GMA by a free radical polymerization. We prepared two plates of each polymer using compression molding with a smooth surface molder, then put one upon another. As soon as these two plates welds together inside a rheometer under nitrogen environment, the torque and moduli were obtained with reaction time at different temperatures. Through the analysis of this modulus change with reaction time, we estimated interfacial reaction and roughening. The increment of modulus in initial state can be correlated to the extent of reaction. We obtained the reaction kinetic constant by fitting appropriate kinetic equation into experimental data. We also showed that increment of modulus in later state was due to by roughened interface.

• Korean Journal of Materials Research
• /
• v.13 no.2
• /
• pp.88-93
• /
• 2003

Co/Ti bilayer structure in Co salicide process helps to the improvement of device speed by lowering contact resistance due to the epitaxial growth of $CoSi_2$layers. We investigated the epitaxial growth and interfacial mass transport of $CoSi_2$layers formed from $150 \AA$-Co/Ti structure with two step rapid thermal annealing (RTA). The thicknesses of Ti layers were varied from 20 $\AA$ to 100 $\AA$. After we confirmed the appropriate deposition of Ti film even below $100\AA$-thick, we investigated the cross sectional microstructure, surface roughness, eptiaxial growth, and mass transportation of$ CoSi_2$films formed from various Ti thickness with a cross sectional transmission electron microscopy XTEM), scanning probe microscopy (SPM), X-ray diffractometery (XRD), and Auger electron depth profiling, respectively. We found that all Ti interlayer led to$ CoSi_2$epitaxial growth, while $20 \AA$-thick Ti caused imperfect epitaxy. Ti interlayer also caused Co-Ti-Si compounds on top of $CoSi_2$, which were very hard to remove selectively. Our result implied that we need to employ appropriate Ti thickness to enhance the epitaxial growth as well as to lessen Co-Ti-Si compound formation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.382-384
• /
• 2009

In this study, high stable oxide thin-film transistors (TFTs) have been developed by using several approaching techniques, which including a change of the channel composition ratio in multi-component oxide semiconductors, a change of TFT structure with interfacial dielectric layers, a control of interface roughness, a channel-doping method, and so on.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.74-84
• /
• 2022

As the semiconductor industry develops, the difficulty of newly required process technology becomes difficult, and the importance of production yield and product reliability increases. As an effort to minimize yield loss in the manufacturing process, interests in the process defect process for facility diagnosis and defect identification are continuously increasing. This research observed the plasma condition changes in the multi oxide/nitride layer deposition (MOLD) process, which is one of the 3D-NAND manufacturing processes through optical emission spectroscopy (OES) and monitored the result of whether the change in plasma characteristics generated in repeated deposition of oxide film and nitride film could directly affect the film. Based on these results, it was confirmed that if a change over a certain period occurs, a change in the plasma characteristics was detected. The change may affect the quality of oxide film, such as the film thickness as well as the interfacial surface roughness when the oxide and nitride thin film deposited by plasma enhenced chemical vapor deposition (PECVD) method.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.1
• /
• pp.39-46
• /
• 2021

The quantitative measurement of interfacial adhesion energy (Gc) of multilayer thin films for Cu interconnects was investigated using a double cantilever beam (DCB) and 4-point bending (4-PB) test. In the case of a sample with Ta diffusion barrier applied, all Gc values measured by the DCB and 4-PB tests were higher than 5 J/㎡, which is the minimum criterion for Cu/low-k integration without delamination. However, in the case of the Ta/Cu sample, measured Gc value of the DCB test was lower than 5 J/㎡. All Gc values measured by the 4-PB test were higher than those of the DCB test. Measured Gc values increase with increasing phase angle, that is, 4-PB test higher than DCB test due to increasing plastic energy dissipation and roughness-related shielding effects, which matches well interfacial fracture mechanics theory. As a result of the 4-PB test, Ta/Cu and Cu/Ta interfaces measured Gc values were higher than 5 J/㎡, suggesting that Ta is considered to be applicable as a diffusion barrier and a capping layer for Cu interconnects. The 4-PB test method is recommended for quantitative adhesion energy measurement of the Cu interconnect interface because the thermal stress due to the difference in coefficient of thermal expansion and the delamination due to chemical mechanical polishing have a large effect of the mixing mode including shear stress.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.225-228
• /
• 2002

Amorphous $Ga_2O_3$ films have been grown on Si(100) substrates by metal organic chemical vapor deposition (MOCVD) using gallium isopropoxide, $Ga(O^iPr)_3$, as single precursor. Deposition was carried out in the substrate temperature range 400-800 $^{\circ}C$. X-ray photoelectron spectroscopy (XPS) analysis revealed deposition of stoichiometric $Ga_2O_3$ thin films at 500-600 $^{\circ}C$. XPS depth profiling by $Ar^+$ ion sputtering indicated that carbon contamination exists mostly in the surface region with less than 3.5% content in the film. Microscopic images of the films by scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed formation of grains of approximately 20-40 nm in size on the film surfaces. The root-mean-square surface roughness from an AFM image was ${\sim}10{\AA}$. The interfacial layer of the $Ga_2O_3$/Si was measured to be ${\sim}35{\AA}$ thick by cross-sectional transmission electron microscopy (TEM). From the analysis of gaseous products of the CVD reaction by gas chromatography-mass spectrometry (GC-MS), an effort was made to explain the CVD mechanism.

• Journal of the Korean Vacuum Society
• /
• v.5 no.3
• /
• pp.258-262
• /
• 1996

We have investigated the changes in magnetoresistive characteristics, interfacial roughness, and preferred orientation with the Fe buffer layer thickness, annealing temperature, and the stacking number of layers variation in Fe/[NiFe/Cu] multilayers by using the 3-gun d.c. magnetron sputtering method. Intensity of the (200) orientation was increased with the increment of the Fe-buffer layer thickness. We found a maximum magnetoresistance ration of 4.7%, when the buffer layer thickness was 70$\AA$, and the field sensitivity also showed a maximum value at the same thickness. We varied the stacking number of multilayers with fixing the Fe buffer layer thickness of 70$\AA$. When the stacking number was 40 layers, maximum MR ratio(5.3%) was observed. With the variation of annealing temperature no change in the MR ratio was found beyond $300^{\circ}C$. But decrement of MR ratio was observed above $300^{\circ}C$. This decrement of the MR ratio was responsible for the increment of paramagnetic mixed layer caused by the diffusion of Cu layer and the change of antiferromagnetic coupling.

• Composites Research
• /
• v.25 no.6
• /
• pp.198-204
• /
• 2012

The objective of this study is to improve the mechanical properties in abaca fabric/epoxy composites produced using a VARTM process. The mechanical properties were improved by increasing the surface roughness of the fabric through plasma polymerization and improving the interfacial adhesion between the epoxy and the fabric through changing its hydrophilic properties to the hydrophobic properties. Plasma polymerization at atmospheric pressure and room temperature was used, and the optimal polymerization time to improve the mechanical properties was investigated. NaOH treatment on the fabric was also carried out for the comparison. The composite fabricated using the fabric polymerized for 10 seconds shows the highest tensile strength compared to that of none-polymerized or NaOH treated. Plasma polymerization for more than 20 seconds exhibits decrease in the tensile strength. As a result, the plasma polymerization for more than 20 seconds may have caused some damages on the surface of the fabrics. Also, the hydrophilic abaca represents a tendency of presenting the hydrophobic properties in absorption and sedimentation tests.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.69-75
• /
• 2020

Multilayer mirrors have widely been used not only in the industry but also in the medical field. X-ray reflectivity was measured by X-ray diffractometer to evaluate the performance of W/C multilayer mirror with 40 layers. Genetic algorithm are used to obtain thickness, density, and interfacial roughness for each of the 40 layers. The existing uniform random selection causes a problem that the solution does not converge or the error increases even if it convergence. To reduce the time to calculate the fitness of the genetic algorithm, the genetic algorithm was written in C/C++ parallel programming. The genetic algorithm showed excellent scalability of linear time increase with increasing number of generation and population. The genetic algorithm was selected with uniform and Gaussian randomness of 1:1 to improve the convergence of solution. The improved genetic algorithm can be applied to characterize each layer of a sample with more than a few tens of layers, such as a multilayer mirror.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.106-106
• /
• 2000

반도체 소자가 미세화 됨에 따라 게이트 유전막으로 사용되는 SiO2의 박막화가 요구되나, boron penetration에 의한 Vt shift, 게이트 누설전류, 다결정 실리콘 게이트의 depletion effect 그리고 quantum mechanical effect 때문에 ~20 급에서 한계를 나타내고 있다. 이에 0.1$\mu\textrm{m}$이상의 design rule을 갖는 logic이나 memory 소자에서 요구되어지는 ~10 급 게이트 산화막은 SiO2(K=3.9)를 대신하여 고유전율을 갖는 재료의 채택이 필수 불가결하게 되었다. 고유전 박막 재료를 사용하면, 두께를 두껍게 해도 동일한 inversion 특성이 유지되고 carrier tunneling 이 덜하여 등가 산화막의 두께를 줄일 수 있다. 이러한 고유전박막 재료중 가장 활발히 연구되고 있는 재료는 Ta2O5, Al2O3, STO 그리고 BST 등이 있으나 Ta2O5, STO, BST 등은 실리콘 기판과 직접 반응을 한다는 문제를 가지고 있으며, Al2O3는 유전율이 낮의 재료가 최근 주목받고 있다. 본 실험에서는 ZrO2, HfO2 또는 그 silicates 등의 재료가 최근 주목 받고 있다. 본 실험에서는 ZrO2 박막의 증착조건에 따른 물리적, 전기적 특성 변화에 대하여 연구하였다. RCA 방식으로 세정한 P-type (100) 실리콘 기판위에 reactive DC sputtering 방법으로 압력 5mtorr, power 100~400W, 기판온도는 100-50$0^{\circ}C$로 변화시켜 ZrO2 박막을 증착한 후 산소와 아르곤 분위기에서 400-80$0^{\circ}C$, 10-120min으로 열처리하였다. 증착직후의 시편들과 열처리한 ZrO2 박막의 미세구조와 전기적 특성 변화를 관찰하였다. 우선 굴절율(RI)를 이용해 ZrO2 박막의 밀도를 예측하여 power와 기판온도에 따라 이론값 2.0-2.2 에 근접한 구조를 얻은 후 XRD, XPS, AFM, 그리고 TEM을 사용하여 ZrO2 박막의 chemical bonding, surface roughness 그리고 interfacial layer의 특성을 관찰하였다. 그리고 C-V, I-V measurement를 이용해 capacitance, 유전율, 누설전류 등의 전기적 특성을 관찰해 최적 조건을 설정하였다.