• Journal of the Korean Magnetics Society
• /
• v.22 no.5
• /
• pp.157-161
• /
• 2012

Magnetism at the interfaces of rocksalt structured half-metals, NaN and CaN were investigated by use of the first-principles band calculations. The electronic structures for the simple interface and mixed interface systems were calculated by the FLAPW (full-potential linearized augmented plane wave) method. From the calculated number of electrons in muffin-tin spheres of each atom, we found, for the simple interface system, that the magnetic moment of the N atom in the CaN (NaN) side is increased (decreased) compared to those of inner N atoms. For the mixed interface system, the magnetic moments of the interface N atoms are similar to the averaged value for the inner N atoms in CaN and NaN side. Among four interface N atoms, the N atom connected to Na atoms in the upper and down layers has the largest magnetic moment and that connected to Ca atoms has the smallest. The number of p electrons in each N atom and the calculated density of states explain well the above situation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.522-525
• /
• 2006

Recently, mobile devices support multi-functions such as 3D game, wireless internet, moving pictures, DMB, GPS, and PMP. Bigger size of display device is indispensable to support these functions and higher speed of the interface is needed. However, conventional parallel interfaces between processor and display nodule are not competent enough for that high speed transfers. High-speed serial interface is beginning to appear as an alternative for parallel interface. The advantages of the serial interface are high bandwidth, small number of interconnections, low-power consumption, and good quality of electro-magnetic interference. In this paper, we implement serial interface and use it for a display module. LVDS is used for PHY layer and a defined packet is used for link layer. The feature of the implemented serial interface is the reduced number of interconnections with enough bandwidth.

• IE interfaces
• /
• v.22 no.1
• /
• pp.17-25
• /
• 2009

In mobile device's user interface, menu organization is very important as well as menu structure because small display of mobile device. Menu items should be organized based on user knowledge structure to design user-centered interface. Traditionally, MDS (Multidimensional Scaling) have been most often used to expose users' perceived organization of menu items. But, information that MDS reveals is just relative spatial location of concepts and not relevant to concepts connection. Unlike MDS, Trajectory Mapping explicitly finds users' cognitive links between perceived concepts. This study proposes a Trajectory Mapping technique for eliciting knowledge structure, especially a set of cognitive pathways linking menu items, from end user. With twelve participants, MDS and Trajectory Mapping were conducted using cellular phone's menu items. And user knowledge structure was analyzed through Visual Concept Map that combination of results of MDS and Trajectory Mapping. After then, menu items were organized according to users' perceived organization. Empirical usability test was also conducted. The results of usability test showed that usability, in terms of task performance time, number of errors, and satisfaction, for newly organized interface was significantly improved compare to original interface. The methodology of this study is expected to be applicable to design a user-centered interface. In other words, Trajectory Mapping technique can be used as a design tool of user interface for imposing user knowledge structure on the interface.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.5
• /
• pp.377-381
• /
• 2009

Tetragonal-NiSi (010)/Si superstructures were calculated for studying the interface structure using density functional theory, The orthorhombic-NiSi was changed to the tetragonal-NiSi to be matched with the Si surface for epitaxy interface. The eight interface models were produced by the type of the Si surfaces, The tetragonal-NiSi (010)/Si (020)[00-1] superstructure was energetically the most favorable, and the interface thickness of this superstructure was the shortest among the tetragonal-NiSi (010)/Si superstructures. However, in the case of tetragonal-NiSi (010)/Si (010)[00-1] superstructure, it was energetically the most unfavorable, and the interface thickness was the longest. The energies and interface thicknesses of tetragonal-NiSi (010)/Si superstructures were influenced by the coordination number of Ni atoms and the bond length between atoms located at the interface.

• Journal of Korea Multimedia Society
• /
• v.23 no.12
• /
• pp.1454-1463
• /
• 2020

An important factor in eye-tracking PC interface for general paralyzed patients is the implementation of the mouse interface, for manipulating the GUI. With a successfully implemented mouse interface, users can generate mouse events exactly at the point of their choosing. However, it is difficult to define this interaction in the eye-tracking interface. This problem has been defined as the Midas touch problem and has been a major focus of eye-tracking research. There have been many attempts to solve this problem using blink, voice input, etc. However, it was not suitable for general paralyzed patients because some of them cannot wink or speak. In this paper, we propose a mouth-pop-up, eye-tracking mouse interface that solves the Midas touch problem as well as becoming a suitable interface for general paralyzed patients using a common RGB camera. The interface presented in this paper implements a mouse interface that detects the opening and closing of the mouth to activate a pop-up menu that the user can select the mouse event. After implementation, a performance experiment was conducted. As a result, we found that the number of malfunctions and the time to perform tasks were reduced compared to the existing method.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.72-79
• /
• 2018

Hybrid F2HX surfactants bearing a sulfate moiety and both hydrocarbon and fluorocarbon chains were prepared by the reaction of alkyl glycidyl ethers with fluoro-alcohol, and subsequent sulfation. The fluorocarbon number in F2HX was fixed at the shortest number possible (i.e., 2), while the hydrocarbon number (X) in the second chain was varied between 2, 4, 6, and 8. Their surface-active properties and emulsion stabilities were systematically estimated as a function of the X. Among them, F2H8 exhibited the optimal surfactant performance, which was comparable to previously reported surfactants and it was successfully applied in the emulsion polymerization of vinylidene fluoride.

• Journal of the Korea Concrete Institute
• /
• v.17 no.5 s.89
• /
• pp.829-834
• /
• 2005

A series of reinforced G109 type specimens was fabricated and pended with a 15 weight percent NaCl solution. Mix design variables included 1) two cement alkalinities (equivalent alkalinities of 0.32 and 1.08), 2) w/c 0.50 and 3) two rebar surface conditions (as-received and wire-brushed). Potential and macro-cell current between top and bottom bars were monitored to determine corrosion initiation time. Once corrosion was initiated, the specimen was ultimately autopsied to perform visual inspection, and the procedure included determination of the number and size of air voids along the top half of the upper steel surface. This size determination was based upon a diameter measurement assuming the air voids to be half spheres or ellipse. The followings were reached based upon the visual inspection of G109 specimens that were autopsied to date. First, voids at the steel-concrete interface facilitated passive film breakdown and onset of localized corrosion. Based upon this, the initiation mechanism probably involved a concentration cell with contiguous concrete coated and bare steel serving as cathodes and anodes, respectively. Second, the corrosion tended to initiate at relatively large voids. Third, specimens with wire-brushed steel had a lower number of voids at the interface for both cement alkalinities, suggesting that air voids preferentially formed on the rough as-received surface compared to the smooth wire brushed one.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.29-36
• /
• 2007

In the Java a profiler interface such as JVM TI is provided for communication between a Java virtual machine and a profiler. The JVM TI specification, however does not require an implementation of a profiler interface. Consequently the JVM without an implementation of a profiler interface cannot use a profiler with the JVM TI. For solving the problem, we propose a technique which analyzes heap usage without a profiler interface. This technique inserts codes to extract heap usage into source files in the Java. We implemented a code inserter to verify the proposed technique. We experimented with Java programs that are frequently used and opened. the experimental result presents the number of created objects. the maximum number of allocated objects, and the used pattern of the objects.

• Geomechanics and Engineering
• /
• v.12 no.6
• /
• pp.1021-1046
• /
• 2017

The assessment of slope stability is an essential task in geotechnical engineering. In this paper, a three-dimensional (3D) finite element analysis (FEA) was employed to investigate the performance of different shear pin arrangements to increase the stability of a soil block resting on an inclined plane with a low-interface friction plane. In the numerical models, the soil block was modeled by volume elements with linear elastic perfectly plastic material in a drained condition, while the shear pins were modeled by volume elements with linear elastic material. Interface elements were used along the bedding plane (bedding interface element) and around the shear pins (shear pin interface element) to simulate the soil-structure interaction. Bedding interface elements were used to capture the shear sliding of the soil on the low-interface friction plane while shear pin interface elements were used to model the shear bonding of the soil around the pins. A failure analysis was performed by means of the gravity loading method. The results of the 3D FEA with the numerical models were compared to those with the physical models for all cases. The effects of the number of shear pins, the shear pin locations, the different shear pin arrangements, the thickness and the width of the soil block and the associated failure mechanisms were discussed.

• Journal of Korean Library and Information Science Society
• /
• v.34 no.3
• /
• pp.111-124
• /
• 2003

The number of elderly people is increasing rapidly in Korea. A large part of their information seeking behaviors are changed form a few conventional types of media such as letters to computers and Internet. Their use of computers and Internet, however, was difficult due to various problems including the interface especially. This work has examined and analysed the basic elements and components of interface design for the elderly people into the previous papers. The result of the study would be applied to the public libraries for the elderly and the interface design within the institution.