• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.434-443
• /
• 2010

A general purpose experimental set-up has been designed and implemented for students to carry out various experiments on inverters in the power electronics laboratories of universities, during a few hours of laboratory work. This is the first inverter setup that incorporates hardware and software control, as well as an optional user interface in a laboratory experimental set-up of a single multi-purpose inverter, thus making the system versatile and very practical for both undergraduate and graduate students. The system can be controlled either by a computer or through a liquid crystal display (LCD) and a keypad control unit, and it constitutes a low-cost alternative to relatively expensive commercial teaching sets. The computer provides a user friendly interface and easier control for laboratory environments equipped with computers. The LCD and keypad units eliminate the need for a computer, which makes this system usable in the laboratory as a standalone unit as well.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1438-1440
• /
• 2005

A power control and distribution unit(PCDU) plays roles of protection of battery against overcharge by active control of solar array generated power, distribution of unregulated electrical power via controlled outlets to bus and instrument units, distribution of regulated electrical power to selected bus and instrument units, and provision of status monitoring and telecommand interface allowing the system and ground operate the power system, evaluate its performance and initiate appropriate countermeasures in case of abnormal conditions. In this work, we perform the preliminary design of a PCDU scheme for the small LEO Satellite applications. The main constitutes of the PCDU are the battery interface module, the auxiliary supply modules, solar array regulators with maximum power point tracking(MPPT) technology, heater power distribution modules, internal converter modules for regulated bus voltage generation. and instrument power distribution modules.

• Journal of IKEEE
• /
• 제18권3호
• /
• pp.368-375
• /
• 2014

Brain computer interface(BCI) technology has been continuously developed due to the continuous development of interface technology and the promotion of brain wave research. In this paper, we propose a driving habit management system by adopting BCI to transportation. The proposed system consists of the electroencephalogram(EEG) measuring unit, the EEG analysis unit, the memory section for storing the state information of drivers, the speed controller unit and the alarming section for generating warnings. Our proposed system can reduce the drowsy driving, improve the driving habits of users and help to prevent traffic accidents.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제11권9호
• /
• pp.855-860
• /
• 2016

This study describes the design and implementation of digital Payload power supply. We materialized the interface of the PLDIU and power supply of a satellite bus, and minimized the potential for the occurrence of such erroneous operation circuit ESD through the WCA of the space environment. We designed a reliable power supply through simulation for a TID according to the vibration generated during the launch and space radiation environment, and found no problem in the function and performance through the test space environment after production.

• International Journal of Ocean System Engineering
• /
• 제1권1호
• /
• pp.52-59
• /
• 2011

A prototype radar display unit was implemented using inexpensive off-the-shelf components, including a nonlinear estimation algorithm for the target tracking in a clutter environment. Two custom designed boards; an analog signal processing board and a DSP board, can be plugged into an expansion slot of a personal computer (PC) to form a maritime radar display unit. Our system provided all the functionality specified in the International Maritime Organization (IMO) resolution A422(XI). The analog signal processing board was used for A/D conversion as well as rain and sea clutter suppression. The main functions of the DSP board were scan conversion and video overlay operations. A host PC was used to run the tracking algorithm of targets in clutter, using the discrete-time Bayes optimal (nonlinear, and non-Gaussian) estimation method, and the graphic user interface (GUI) software for Automatic Radar Plotting Aid (ARPA). The proposed tracking method recursively found the entire probability density function of the target position and velocity by converting into linear convolution operations.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제16권3호
• /
• pp.437-442
• /
• 2021

This study describes the design and implementation of power supply of dehop/rehop transponder of EQM(Engineering Qualification Model). We materialized the interface of the PLDIU and power supply of a satellite bus, and minimized the potential for the occurrence of such erroneous operation circuit ESD through the WCA of the space environment. We designed a reliable power supply through simulation for TID about space radiation and simulation of the vibration generated during it launched, and we confirmed that it satisfies the environmental test specification through the test space environment after production.

• Journal of Korea Multimedia Society
• /
• 제14권11호
• /
• pp.1500-1506
• /
• 2011

This paper is to propose for the production of a digital-based new interface for the percussion of samulnori which are drum, janggu, jing and kkwaenggwari. Newly designed interface is similar to a jing-shaped percussion, and it was designed to playall of four instruments from a single interface. Two batting sufaces, which are located both in front and at trunk of the interface, generate a hitting date creating when interface to be hit and a pressure data when to grip the handle by control unit located at the handle. The information generated is transmitted to a computer via a wireless communication, and then, the computer generate a synthesized sound based on the characteristic of each instrument.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• 제32B권1호
• /
• pp.161-170
• /
• 1995

In this paper, we define schematic User Interface Task(SUIT) as a scheme which is a conceptual unit to specify the dialogue between man and machine. Using a set of SUITs, the user interface can be described separately from domain applications and can be realized through SUIT Manager(SUITMAN), an execution module devised to interprete and process the descriptions of SUITs. SUIT makes it possible to describe conceptual behaviors performed on the interactions of user interface in early stages of expert system development. SUITMAN analyzes the specification described in SUITs and automatically implements the user interface by using the functions in MOTIF library of X-Window system. By an example of SUIT and SUITMAN to the user interface, we applied them into an expert system, 'Circuit Provisioning Expert System'.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.810-815
• /
• 2010

Since a long time ago, many railway engineers analyze and discuss the interface between the sub-system of railway, such as a wheel/rail interface, pantograph/catenary interface etc. The verifying of the system interface could help to achive the optimized performance and safety of the railway system considering that the railway system is constructed by various engineerings, such as civil, mechanical, electrical, etc. A rolling stock with distributed drive system, which will be developed by HEMU-400x project, is capable of running on high speed line and conventional line in Korea. To verify the performance of rolling stock, test run will be done with revenue service line. And the test items of the system interface have to be selected to verify a functional compatibility and physical force between rolling stock and infrastructure. In this paper, the authors will indicates the test items to verify system interface. To achive the conclusion, the authors analyze a specification of the development train and the design value of Seoul-Busan high speed line, which will be used for testing of the development train, and also, study the various case of high speed train commissioning.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제27권5호
• /
• pp.775-783
• /
• 1990

In this paper we implemented the fast thinning unit by modifying the pipeline architecture which was proposed by Stanley R. Sternberg. The unit is useful in preprocessing such as image representation and pattern recognition etc. This unit is composed of interface part, local memory part, address generation part, thinning processing part and control part. In thinning processing part, we shortened the thinning part which performed by means of look up table using window mapping table. Thus we improved the weakness of SAP, in which the number of delay pipeline and window pipeline are equal to image column size. Two independent memorys using tri-state buffer enable the two direction flow of address generated by address generation part. This unit avoids the complexity of architecture and has flexibility of image size by means of simple modification of logic bits.