• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.359-370
• /
• 1993

Up to now, most studies are on interface crack problems in isotropic-isotropic dissimilar materials, but it seems to be not so much on anisotropic dissimlar materials. In this study, the stress intensity factors for an interface crack in anisotropic dissimilar materials are analysed using author's proposed extrapolation method by BEM and we have done a parametric study about material properties or shapes of crack affecting to the stress intensity factors. However, as there are not other's comparable numerical results on these anisotropic dissimilar materials to the best of author's knowledge, the reliability of the present results was proved by following two methods. The first is considering the asymptotic characteristic about stress intensity factors for an interface crack in anisotropic materials when the ansiotropic material approachs to the isotropic material. The second is considering the discontinuity of stress intensity factors between of a crack in an identical homogeneous anisotropic material and an interface crack in anisotropic dissimilar materials.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.293-303
• /
• 2005

Bonded dissimilar materials are being increasingly used in automobiles, aircraft, rolling stocks, electronic devices and engineering structures. Bonded dissimilar materials have several material advantages over homogeneous materials such as high strength, high reliability, light weight and vibration reduction. Due to their increased use it is necessary to understand how these materials behave under stress conditions. One important area is the analysis of the stress intensity factors for interface cracks emanating from circular holes in bonded dissimilar materials. In this study, the bonded scarf joint is selected for analysis using a model which has comprehensive mixed-mode components. The stress intensity factors were determined by using the boundary element method (BEM) on the interface cracks. Variations of scarf angles and crack lengths emanating from a centered circular hole and an edged semicircular hole in the Al/Epoxy bonded scarf joints of dissimilar materials are computed. From these results, the stress intensity factor calculations are verified. In addition, the relationship between scarf angle variation and the effect by crack length and holes are discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.176-181
• /
• 2000

Stress intensity factors for a rigid line inclusion tying along a bimaterial interface are calculated by the boundary element method with the multiregion and double-Point techniques. The formula between the stress intensity factors and the inclusion surface stresses are derived. The numerical values of the stress intensity factors for the bimaterial interface rigid line inclusion in the infinite body are proved to be in good agreement within 3% when compared with the previous exact solutions. In the finite bimaterial systems, the stress intensity factors for the center and edge rigid line inclusions at interface are computed with the variation of the rigid line inclusion length and the shear modulus ratio under the biaxial and uniaxial loading conditions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.380-385
• /
• 2000

In this study, geometric shape and crack in welded interface of the air cooled heat exchanger Fin-Tube of Dissimilar Meterials was analysed. The object of study is to understand the behavior of Stress Intensity Factor for fin length, flash thickness, flash length, symmetric and asymmetric cracks of comming from the manufacturing process. Stress Intensity Factor was analysed by BEM. Kelvin's solution was used as a fundamental solution in BEM analysis and stress extrapolation method was used to determine Stress Intensity Factor.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.35-39
• /
• 2018

This paper deals with the relaxation of singular stresses developed in an epoxy adhesive at high temperature. The interface stresses are analyzed using BEM. The adhesive employed in this study is an epoxy which can be cured at room temperature. The adhesive is assumed to be linearly viscoelastic. First, the distribution of the interface stresses developed in the adhesive layer under the uniform tensile stress has been calculated. The singular stress has been observed near the interface corner. Such singular stresses near the interface corner may cause epoxy layer separated from adherent. Second, the interfacial thermal stress has been investigated. The uniform temperature rise can relieve the stress level developed in the adhesive layer under the external loading, which can be viewed as an advantage of thermal loading. It is also obvious that temperature rise reduces the bonding strength of the adhesive layer. Experimental evaluation is required to assess a trade-off between the advantageous and deleterious effects of temperature.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.94-102
• /
• 2007

Applications of bonded dissimilar materials such as large scale integration (LSI) packages, ceramics/metal and resin/metal bonded joints, are very increasing in various industry fields. It is very important to analyze the thermal stress and stress singularity at interface edge in LSI. In order to investigate stress singularities on the bonded interface edges and delamination of die pad and resin in the IC package. In this paper, stress singularity factors(${\Gamma}_i$) and stress intensity factors($K_i$) considering thermal stress in the IC package were analyzed by using the 2-dimensional elastic boundary element method(BEM).

• Computers and Concrete
• /
• 제25권2호
• /
• pp.145-154
• /
• 2020

For the influence of the propagation law of stress wave at the coal-rock interface during the pre-blasting of the top coal in top coal mining, the ANSYS-LS/DYNA fluid-solid coupling algorithm was used to numerical calculation and the life-death element method was used to simulate the propagation of explosion cracks. The equation of the crushing zone and the fracturing zone were derived. The results were calculated and showed that the crushing radius is 14.6 cm and the fracturing radius is 35.8 cm. With the increase of the angles between the borehole and the coal-rock interface, the vibration velocity of the coal particles and the rock particles at the interface decreases gradually, and the transmission coefficient of the stress wave from the coal mass into the rock mass decreases gradually. When the angle between the borehole and the coal-rock interface is 0°, the overall crushing degree is about 11% and up to the largest. With the increase of the distance from the charge to the coal-rock interface, the stress wave transmission coefficient and the crushing degree of the coal-rock are gradually decreased. At the distance of 50 cm, the crushing degree of the coal-rock reached the maximum of approximately 12.3%.

• 한국지반환경공학회 논문집
• /
• 제11권11호
• /
• pp.47-54
• /
• 2010

최근 쓰레기 매립장에 보강 및 보호 목적으로 토목섬유가 널리 사용되고 있다. 최근 연구결과, 토목섬유-흙 접촉면에서는 진행성 파괴가 발생할 수 있는데 이는 토목섬유-흙 접촉면에서 함수비, 연직응력, 화학적 요소의 영향 등 고유물성에 기인한다. 본 연구에서는 침출수 내의 산성 및 염기성과 같은 성분의 영향이 진동하중 상태에서 토목섬유-흙 접촉면의 전단강도 감소에 미치는 영향을 실내 시험을 통하여 분석하였다. 다기능 접촉면 시험기를 새로 구축하고 서로 다른 pH 조건에서 수침시킨 토목섬유와 흙시료를 이용하여 진동 직접전단시험을 수행하여 접촉면 전단두께와 화학적 요소에 의한 접촉면의 전단강도 감소를 확인하였다. 또한 접촉면 전단강도 감소를 정량적으로 표현하기 위하여 교란상태개념에 기초하여 동하중 하의 화학적 인자들에 의한 토목섬유-흙 접촉면의 정규화 교란도 함수를 파악하고 전단강도 감소 특성을 확인하였다.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2398-2406
• /
• 1993

Abdi's numerical method(ref.13) for representing a stress singularity by shifting the mid-side nodes of isoparametric elements is reviewed. A simple technique to obtain the optimal position of the mid-side nodes in quadratic isoparametric finite element is presented. From this technique we can directly obtain the position of the side-nodes adjacent to the crack tip. It is also observed that the present technique provides good accuracy for the expression of the opening displacement and the determination of the mid-side nodes for more wide range of material properties than that obtained by Abdicant the finite element method is applied to determine stress intensity factors for pressurized crack perpendicular to and terminating at the interface of two bonded dissimilar materials. A proper definition for stress intensity factors of a crack perpendicular to bimaterial interface is provided. It is based upon a near-tip displacement solutions on the crack surface for interface crack between two dissimilar materials. Numerical testing is carried out with the eight-node and six-node elements. The results obtained are compared with the previous solutions.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2277-2286
• /
• 2002

The application of bonded dissimilar materials to industries as automobiles, aircraft, rolling stocks, electronic devices and engineering structures is increasing gradually because these materials, compared to the homogeneous materials, have many advantages for material properties. In spite of such wide applications of bonded dissimilar materials, the evaluation method of quantitative strength considering the stress singularities for its bonded interface has not been established clearly. In this paper, the stress singularity for Bctors and the stress intensity factors were analyzed by boundary element method(BEM) for the scarf joints of Al/Epoxy with and without a crack, respectively. From static fracture experiments of the bonded scarf joints, a fracture criterion and a evaluation method of interface strength in bonded dissimilar materials were proposed and discussed.