• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.74-85
• /
• 2015

PCI Express is a well-known and widely used de-facto system bus standard for connecting among a processor and IO devices. PCI Express is originated from old PCI standard, and its most of applications are limited to be used within a PC or server system. But, because of its fast speed, low power consumption, and good protocol efficiency, it is considered as one of a good candidate for an alternate system interconnect for many years. In this paper, we present design, implementation and early evaluation of an alternate system interconnect by utilizing PCI Express. The developed alternate system interconnect using PCI Express (named PCIeLINK) utilizes non-transparent bridging (NTB) technic which generally used in fail-over system in PCI and PCI Express. By using NTB technic, PCI Express device can be extended to outside of a system without electrical and logical problems arising during system boot and enumeration. To build up an alternate system interconnect, we designed and implemented a network interface card having multiple PCI Express ${\times}4$ connections (theoretically 20 Gbps) and tested, The early test results revealed that an ${\times}4$ port in the card showed 8.6 Gbps peak performance for bulk transmission and 5.1 Gbps peak for normal TCP/IP transfer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.79-90
• /
• 2005

In this paper, we propose a new clustered reconfigurable interconnect network (CRIN) BIST to improve the embedding probabilities of random-pattern-resistant-patterns. The proposed method uses a scan-cell reordering technique based on the signal probabilities of given test cubes and specific hardware blocks that increases the embedding probabilities of care bit clustered scan chain test cubes. We have developed a simulated annealing based algorithm that maximizes the embedding probabilities of scan chain test cubes to reorder scan cells, and an iterative algorithm for synthesizing the CRIN hardware. Experimental results demonstrate that the proposed CRIN BIST technique achieves complete fault coverage with lower storage requirement and shorter testing time in comparison with the conventional methods.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.77-81
• /
• 2006

Because of the rapid increasing of network user, there are some problems to tolerate the network overhead. Recently, the research and technology of the user-level for high performance and low latency than TCP/IP which relied upon the kernel for processing the messages. For example, there is an Infiniband technology. The Infiniband Trade Association (IBTA) has been proposed as an industry standard for both communication between processing node and I/O devices and for inter-processor communication. It replaces the traditional bus-based interconnect with a switch-based network for connecting processing node and I/O devices. Also Infiniband uses RDMA (Remote DMA) for low latency of CPU and OS to communicate between Remote nodes. In this paper, we develop the SRP (SCSI RDMA Protocol) which is Storage Access Protocol on Infiniband network. And will compare to FC (Fibre Channle) based I-SCSI (Internet SCSI) that it is used to access storage on Etherent Fabric.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.933-939
• /
• 2007

Safety critical systems such as x-by-wire systems require in-vehicle network systems that can interconnect various sensors, actuators, and controllers. These networks need to have high data rate, deterministic operation, and fault tolerance. Recently, FlexRay protocol that is a time-triggered protocol has been introduced, and many automotive companies have been focusing on this protocol. This paper presents a design method of FlexRay network system and implementation of FlexRay-based motor control system.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.93-96
• /
• 2000

The CMIP(Common Management Information Protocol) and SNMP(Simple Network Management Network) are the two major network management protocols, Which nee to be integrated. Since the networks need to be managed in a uniform way, the CORBA(Common Object Request Broker Architecture) NE View is to develop as a Standard in the ATM Forum For the TMN management structure to integrate these two protocols. In this paper, the function classes are defined to develop the gateway for efficient subnetwork management. The function classes are defined based on the analysis of EMS functions which are mainly network management design of the TMN structure. Also, the object models of the SMI)(Structure of Management Information) in SNMP and the GDMO(Guidelines for the Definition of Managed Objects) in CMIP are developed way direct translation and abstract translation. The integrated management system design, information model translation of EMS using classdefinition, is efficient is efficient method to interconnect CORBA/SNMP and CORBA/CMIP.

• Journal of Information Processing Systems
• /
• v.13 no.2
• /
• pp.348-359
• /
• 2017

Nowadays most vehicles are equipped with a variety of electronic devices to improve user convenience as well as its performance itself. In order to efficiently interconnect these devices with each other, Controller Area Network (CAN) is commonly used. However, the CAN requires reconfiguration of the entire network when a new device, which is capable of supporting both of transmission and reception of data, is added to the existing network. In addition, since CAN is based on the collision avoidance using address priority, it is difficult that a new node is assigned high priority and eventually it results in transmission delay of the entire network. Therefore, in this paper we propose a new system component, called CAN coordinator, and design a new CAN framework capable of supporting plug and play functionality. Through experiments, we also prove that the proposed framework can improve real-time ability based on plug and play functionality.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.8
• /
• pp.709-716
• /
• 2005

As a way to build more efficient and intelligent container cranes for todays hub ports, communication networks are used to interconnect numerous sensors, actuators, controllers, and operator switches and consoles that are spatially distributed over a crane. Various signals such as sensor values and operator's commands are digitized and broadcast on the network instead of using separate wiring cables. This not only makes the design and manufacturing of a crane more efficient, but also easier implementation of intelligent control algorithms. This paper presents the performance evaluation of CAN(Controller Area Network), TTP(Time Triggered Protocol) and Byteflight that can be used for cranes. Through discrete event simulation, several important quantitative performance factors such as the probability of a transmission failure, average system delay (data latency) and maximum system delay have been evaluated.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.95-103
• /
• 2017

The PCI Express is a widely used system bus technology that connects the processor and the peripheral I/O devices. The PCI Express is nowadays regarded as a de facto standard in system area interconnection network. It has good characteristics in terms of high-speed, low power. In addition, PCI Express is becoming popular interconnection network technology as like Gigabit Ethernet, InfiniBand, and Myrinet which are extensively used in high-performance computing. In this paper, we designed and implemented a evaluation platform for interconnect network using PCI Express between two computing nodes. We make use of the non-transparent bridge (NTB) technology of PCI Express in order to isolate between the two subsystems. We constructed a testbed system and evaluated the performance on the testbed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.25-32
• /
• 2009

Recently, research for Network-on-chip(NoC) is progressing. However, due to the increase of system complexity and demand on high performance, conventional copper-based electrical interconnect would be faced with the design limitation of performance, power, and bandwidth. As an alternative to these problems, combined use of Electrical Interconnects(EIs) and Optical Interconnects(OIs) has been introduced. In this paper we propose efficient routing optimization strategy and hybrid switch architecture, which use OIs for critical path and EIs for non-critical path. The proposed method shows up to 25% performance improvement and 38% power reduction.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.57-66
• /
• 2010

Today the various types of communication and application service are provided by the development of Internet and IP technologies. It is expected to be extended the service domain of two networks through the interconnecting P2PSIP overlay which is highlighted as an important technologies for Internet based services and IMS(IP Multimedia Subsystem) which is the new architecture adopted in the evolution of NGN. Therefore, this paper explains the possible methods of the service expansion with interconnecting P2PSIP overlay and IMS network. Specially this paper suggests the interconnection architectures of P2PSIP overlay and IMS network as subscriber's types and analyzes the traffic analysis model and session set up delay characteristics by simulation model. As a results, this paper shows that the interconnection architecture using gateway AS(Application Server) is the excellent method to interconnect the IMS in case of P2PSIP overlay only subscriber, and that interconnection architecture using I-CSCF is good method to interconnect the IMS in case of P2PSIP overlay and IMS subscriber.