• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.3
• /
• pp.54-62
• /
• 2002

This paper describes a development of the integrated controller system for car electrical signal and sensor input/output control with CAN communication protocol. In order to improve the system reliability and effectiveness for the conventional controller using the wiring harness, a detailed integrated control system is introduced and discussed. The CAN communication protocol is a robust control method with serial bus system for the control of distributed module in the multiplexed network. Therefore, this has high reliability and flexibility in the overall control system implementation. This paper proposes an integrated system with high reliability and stability for control of various car signal, and evaluates the effectiveness of the system using the actual implementation. For these purposes, after a brief of the main features of the CAN will be addressed, this paper presents the result of development of the integrated hardware system and overall control program.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1556-1570
• /
• 2016

In the process of virtual inertia control (VIC), the frequency regulation capability of the directly-driven wind turbine with permanent-magnet synchronous generator (D-PMSG) on wind farm is related to its rotor kinetic energy and capacity margin. This paper proposes the method for assessing the D-PMSG frequency regulation capability and defining its coefficient according to the operating state of wind power generators. In addition, the calculating method of parameters in VIC is also discussed according to the principles of primary frequency regulation and inertia response of synchronous generators. Then, by introducing the capability coefficient into the proportion-differential virtual inertia control (PD-VIC) for power coordination, a coordinated virtual inertia control (C-VIC) strategy is developed, with the consideration of the difference in frequency regulation capability between wind power generators. The proposed control method can not only give full play to the frequency regulation capability of wind power generators, decrease the movements of the pitch angle control system but also bring some self-coordination capability to different wind power generators thus to avoid a secondary drop in system frequency. The simulations and experiments prove the proposed method to be effective and practicable.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.35-43
• /
• 2019

This paper describes the improved environment recognition algorithms using some type of sensors like LiDAR and cameras. Additionally, integrated control algorithm for an autonomous vehicle is included. The integrated algorithm was based on C++ environment and supported the stability of the whole driving control algorithms. As to the improved vision algorithms, lane tracing and traffic sign recognition were mainly operated with three cameras. There are two algorithms developed for lane tracing, Improved Lane Tracing (ILT) and Histogram Extension (HIX). Two independent algorithms were combined into one algorithm - Enhanced Lane Tracing with Histogram Extension (ELIX). As for the enhanced traffic sign recognition algorithm, integrated Mutual Validation Procedure (MVP) by using three algorithms - Cascade, Reinforced DSIFT SVM and YOLO was developed. Comparing to the results for those, it is convincing that the precision of traffic sign recognition is substantially increased. With the LiDAR sensor, static and dynamic obstacle detection and obstacle avoidance algorithms were focused. Therefore, improved environment recognition algorithms, which are higher accuracy and faster processing speed than ones of the previous algorithms, were proposed. Moreover, by optimizing with integrated control algorithm, the memory issue of irregular system shutdown was prevented. Therefore, the maneuvering stability of the autonomous vehicle in severe environment were enhanced.

• Smart Structures and Systems
• /
• v.3 no.1
• /
• pp.115-131
• /
• 2007

The electromechanical integrated toroidal drive is a new drive system. For the control of the drive, the torque fluctuation and the steady-state errors should be removed and the fast response to the input change should be achieved. In this paper, the torque fluctuation of the drive system is analyzed and expressed as Fourier series forms. The transfer function of the torque control for the drive system is derived from its electromechanical coupled dynamic equations. A 2-DOF control method is used to control the drive system. Using definite parameter relationship of the 2-DOF control system, the steady errors of the torque control for the drive system is removed. Influences of the drive parameters on the control system are investigated. Using proper drive parameters, the response time of the control system is reduced and the quick torque response of the drive system is realized. Using a compensated input voltage, the torque fluctuation of the drive system is removed as well. The compensated input voltage can be obtained from the torque fluctuation equation and the transfer function. These research results are useful for designing control system of the new drive.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.4
• /
• pp.320-328
• /
• 2003

This paper proposes a new nonlinear adaptive guidance law. Fourth order state equation for integrated guidance and control loop is formulated considering target uncertainties and control loop dynamics. The state equation is further changed into the normal form by nonlinear coordinate transformation. An adaptive nonlinear guidance law is proposed to compensate for the uncertainties In both target acceleration and control loop dynamics. The proposed law adopts the sliding mode control approach with adaptation fer unknown bound of uncertainties. The present approach can effectively solve the existing guidance problem of target maneuver and the limited performance of control loop. We provide the stability analyses and demonstrate the effectiveness of our scheme through simulations.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.235-246
• /
• 2007

The study aims to design an integrated remote controller, which is an increasingly essential device in the home, for more convenient use. For this purpose, an alternative user interface (UI) design was developed by applying the user interface system of a popular existing product to an integrated remote control highly usable and easy to learn for domestic use, and the usability was evaluated. For the existing popular product, a cellular phone was selected, the operation method of which is similar to the stick-type integrated remote control for which the user interface design was to be developed in this research. Common characteristics of the UI of the selected cellular phone were derived and the characteristics were applied as much as possible to the design of a stick-type integrated remote control. The prototype of the alternative design, which was simulated with Flash, went through two pilot tests for further improvement before making the final experimental prototype. Based on the results, prototype buttons that improved the feeling of use in terms of physical operation and feedback were made, and the usability of the new UI design of a stick-type integrated remote control for domestic use were evaluated with 41 university students in their 20s. According to the results of the experiment, the newly designed stick-type integrated remote control based on the UI of an existing product may improve the usability of remote controls and the outcome of this study is expected to provide a good model for R&D of new UI designs of stick-type integrated remote controls for domestic use.

• Journal of Korean Society for Quality Management
• /
• v.38 no.1
• /
• pp.64-74
• /
• 2010

Since management of information resources is getting more complicated in the distributed, heterogeneous computing environment, the capability of monitoring and controlling the dispersed information resources is perceived as a critical success factor for the effective enterprise-wide information resource management. Integrated Control Architecture(ICA) provides that capability. Utilizing such architecture, we can manage corporate information resources more efficiently, perform impact analysis for changes in information resources, and alleviate the human effort by automating the monitoring of critical information resources. In this paper, we propose a conceptual framework and metamodel of ICA.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.935-938
• /
• 1991

We are developing an automatic adjusting system for ITC. ITC(Integrated Tube Components) has a large set-by-set variability in its characteristics. And it also has nonlinearities. It requires not only a fast vision process but also an efficient control algorithm to meet the need for high productivity. In this paper, the description of an adjusting system and the modelling of ITC will be presented. And also the concept of a new rule based hierarchical algorithmic approaches will be suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.313-316
• /
• 1989

One of the main problems in modern factories is that most of the plants utilize programmable devices from a wide range of manufactures and each requires its own proprietary protocol and interface. To avoid this type of problems a Integrated Control System is proposed that prevents these multi-vendor environments. The paper describes the architecture of the system and discusses the benifits that from its implementation can be derived.

• Journal of Aerospace System Engineering
• /
• v.2 no.1
• /
• pp.17-21
• /
• 2008

A compact, light-weight, integrated flight control computer(IFCC) for small unmanned autonomous vehicles is developed. Its design objective is to produce an all in one avionics system which includes the navigation sensor, data link, attitude sensors and air data sensors. The initial phase of ground and flight tests are performed to verify the prototype IFCC, showing promising results. The high potential of its application is expected.