• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2543-2553
• /
• 1994

Caustics method has been applied successfully to determine the fracture parameters such as stress intensity factor and the J-integral for elastic and/or elastic-plastic stress field around the crack tip. For stress fields at the vicinity of crack tip in the creep domain, no experimental report concerning fracture mechanics parameters by using the caustics method has been published up to date. This study investigated creep behavior at the vicinity of crack tips at high temperature($175^{\circ}C$) and attempted to determine of proper fracture parameters for A1 5086 H24 specimens by using the caustics method. The results obtained from the limited experimental investigation are as follows; $J_{th}/J_{caus}$ is found to approach to 1 more rapidly than $K_{th}/K_{caus}$ does during incipient period(within 80 minutes). It is confirmed that experimental $K_{caus}$ approached to theoretical $K_{th}$ after 80 minutes by analyzing the ratio of $K_{th}$ to $K_{caus}$. Unlike the case of room temperature, it is confirmed experimentally that caustics diameter enlarged gradually even the distance between specimen and screen keeps constant. It showed that initial curve of the caustics was initially located in the plastic zone, but it grew out rapidly into the elastic zone for Al 5086 H24 at $175^{\circ}C$. It is confirmed that caustics is a function of time, temperature and distance between specimen and screen at high temperature.

• 수산해양기술연구
• /
• 제21권2호
• /
• pp.151-156
• /
• 1985

본 연구에서는 양쪽크랙 인장시험편을 이용한 평면응력 파괴인성치 J 하(1C)를 검토하기 위하여, 두께 4.5mm 일반구조용 압연강판(SS41)을 균질화 및 연화처리하고 각각의 경우에 대하여 크랙비가 0.55, 0.65, 0.75인 시험편을 준비하여 J 하(1C) 및 저항곡선의 거동을 고찰하였다. 얻어진 결과를 요약하면 다음과 같다. 1) 양쪽 크랙 인장시험편을 사용하여 J 하(1C)를 구한 값은 한계하중에 의한 방법이 Rice가 제안한 방법보다 크게 나타남을 알 수 있다. 2) Rice가 제안한 방법으로 J 하(1C)는 실험한 크랙비 범위 0.55-0.75에서 거의 일정한 값을 나타내고 저항곡선의 기울기는 크랙비에 따라 증가하였다. 3) Rice가 제안한 방법으로 [SS41의 J 하(1C)의 평균값은 모재는 22.8kgf/mm, 균질화 처리재는 24.7kgf/mm, 연화처리재는 26.9kgf/mm를 얻었다

• Steel and Composite Structures
• /
• 제46권3호
• /
• pp.367-383
• /
• 2023

In this investigation, an improved integral trigonometric shear deformation theory is employed to examine the vibrational behavior of the functionally graded (FG) sandwich plates resting on visco-Pasternak foundations. The studied structure is modelled with only four unknowns' variables displacements functions. The simplicity of the developed model being in the reduced number of variables which was made with the help of the use of the indeterminate integral in the formulation. The current kinematic takes into consideration the shear deformation effect and does not require any shear correction factors as used in the first shear deformation theory. The equations of motion are determined from Hamilton's principle with including the effect of the reaction of the visco-Pasternak's foundation. A Galerkin technique is proposed to solve the differentials governing equations, which enables one to obtain the semi-analytical solutions of natural frequencies for various clamped and simply supported FG sandwich plates resting on visco-Pasternak foundations. The validity of proposed model is checked with others solutions found in the literature. Parametric studies are performed to illustrate the impact of various parameters as plate dimension, layer thickness ratio, inhomogeneity index, damping coefficient, vibrational mode and elastic foundation on the vibrational behavior of the FG sandwich plates.

• 대한토목학회논문집
• /
• 제7권1호
• /
• pp.11-22
• /
• 1987

흐름수역(水域)에서 연직상향으로 방류되는 평면부력(平面浮力)?의 거동이 연속방정식(連續方程式), 운동량방정식(運動量方程式) 및 추적물수송식(追跡物輸送式)의 기본방정식을 수치적(數値的)으로 풀음으로서 해석(解析)된다. 난류확산(亂流擴散)에는 Prandtl의 혼합거리이론(混合距離理論)을 도입한 난류수송모형(亂流輸送模型)이 이용된다. 수치해과정(數値解過程)은 기본방정식을 유함수(流凾數)(stream function)식(式)과 골도수송(滑度輸送)(vorticity transport)식을(式) 이용하여 변환(變換)한 후, ?방류속도(放流速度), ?방류구폭(放流口幅) 등(等)으로 표현되는 변수(變數)와 흐름을 지배(支配)하는 무차원매개변수(無次元媒介變數)를 도입하여 무차원화(無次元化)하고 successive under-relaxation을 이용하여 Gauss-Seidal 반복법(反復法)으로 해를(解) 구(求)하는 것이다. 수치실험(數値實驗)은 방류(放流)Froude수(數)가 4~32, 방류속도(放流速度)와 가로흐름속도와의 비로(比) 정의되는 속도비가 8~15 의 범위의 흐름영역(領域)에서 수행되었다. 부력(浮力)?으로 인한 주변(周邊)흐름수역(水域)의 속도변화(速度變化), 온도상승(溫度上昇)범위, 흐름상태 및 골도(滑度)가 조사되었으며, ?의 경로에 대한 속도비와 방류밀도Froude 수의 영향이 또한 조사되었다. ?중심선의 속도, 온도변화, 국부밀도(局部密度)Froude 수(數)의 변화가 계산되며 퍼짐율(spreading rate)과 확산비(擴散比)(dispersion ratio)가 방류밀도(放流密度)Froude 수, 국부밀도(局部密度)Froude 수(數) 및 속도비(速度比)의 항(項)으로 해석되었다. 또한 속도와 온도분포를 상사(相似)(similarity)로 나타낼 수 있음이 밝혀졌으며, Gaussian 분포(分布)를 이용한 적분형해석(積分型解析)(integral type analysis)이 가능한 것으로 사료된다.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.19-26
• /
• 2010

본 논문에서는 유한요소 해석을 통해 용접부 중앙에 원주방향균열이 있는 배관에 대한 강도불일치 한계하중 해석 및 파괴역학 해석을 수행하였다. 강도불일치 한계하중식을 제시하기 위해 강도불일치 비, 용접부 폭, 균열 길이 및 배관 반경비에 대한 체계적인 변수 해석을 수행하였으며 참조응력법을 바탕으로 스테인리스강 및 페리틱 강에 대한 J-적분 계산을 수행하였다. 본 연구에서 제시한 강도불일치 한계하중을 사용하여 참조응력을 정의할 때, 보다 정확한 J-적분 결과를 얻을 수 있었다.

• 전자공학회논문지
• /
• 제49권10호
• /
• pp.148-158
• /
• 2012

본 논문에서는 센서용 incremental 델타-시그마 아날로그 디지털 변환기를 설계 하였다. 회로는 크게 pre-amplifier, S & H (sample and hold) 회로, MUX와 델타-시그마 모듈레이터, 그리고 데시메이션 필터로 구성 되어 있다. 델타-시그마 모듈레이터는 3차 1-bit 구조이고 $0.18{\mu}m$ CMOS 공정을 사용 하였다. 설계된 회로는 테스트 결과 5 kHz 신호 대역에서 signal-to-noise and distortion ratio (SNDR)는 87.8 dB의 성능을 가지고, differential nonlinearity (DNL)은 ${\pm}0.25$ LSB (16-bit 기준), integral nonlinearity (INL)은 ${\pm}0.2$ LSB 이다. 델타-시그마 모듈레이터 전체 소비 전력은 $941.6{\mu}W$ 이다. 최종 16-bits 출력을 얻기 위하여 리셋을 인가하는 N cycle을 200 으로 결정하였다.

• 대한의용생체공학회:의공학회지
• /
• 제35권3호
• /
• pp.35-41
• /
• 2014

In this study, joint angles of the lower extremity and inertial sensor data such as accelerations and angular velocities were measured during a ski simulator exercise in order to evaluate the skill of skiers. Twenty experts and twenty unskilled skiers were recruited for the study. All expert skiers held the certificates issued by the Korea Ski Instructors Association. A three-dimensional motion capture system and two inertial sensors were used to acquire joint movements, heel acceleration and heel angular velocity during ski simulator exercises. Pattern variation values were calculated to assess the variations in ski simulator motion of expert and unskilled skiers. Integral ratio of roll angular velocity was calculated to determine the parallel alignment of the two feet. Results showed that ski experts showed greater range of motion of joint angle, peak-to-peak amplitude(PPA) of heel acceleration and PPA of heel angular velocity than unskilled skiers. Ski experts showed smaller pattern variations than unskilled skiers. In addition, the integral ratio of roll angular velocity in ski experts was closer to 1. Inertial sensor data measurements during the ski simulator exercises could be useful to evaluate the skill of the skier.

• Structural Engineering and Mechanics
• /
• 제71권6호
• /
• pp.627-641
• /
• 2019

The paper focuses on bending analysis of the functionally graded (FG) plates with arbitrary shapes and boundary conditions. The material property of FG plates is modelled by using the power law distribution. Based on the first order shear deformation plate theory (FSDT), the governing equations as well as boundary conditions are formulated and obtained by using the principle of virtual work. The coupled Boundary Element-Radial Basis Function (BE-RBF) method is established to solve the complex FG plates. The proposed methodology is developed by applying the concept of the analog equation method (AEM). According to the AEM, the original governing differential equations are replaced by three Poisson equations with fictitious sources under the same boundary conditions. Then, the fictitious sources are established by the application of a technique based on the boundary element method and approximated by using the radial basis functions. The solution of the actual problem is attained from the known integral representations of the potential problem. Therefore, the kernels of the boundary integral equations are conveniently evaluated and readily determined, so that the complex FG plates can be easily computed. The reliability of the proposed method is evaluated by comparing the present results with those from analytical solutions. The effects of the power index, the length to thickness ratio and the modulus ratio on the bending responses are investigated. Finally, many interesting features and results obtained from the analysis of the FG plates with arbitrary shapes and boundary conditions are demonstrated.

• 한국가스학회지
• /
• 제25권6호
• /
• pp.14-21
• /
• 2021

-162℃ 초저온 상태의 LNG를 저장하는 저장탱크의 내조는 균열과 같은 결함에 대한 구조 건전성 평가가 필요하다. 전통적인 파괴역학 관점에서는 응력확대계수 K, J-적분 그리고 CTOD를 이용한 단일 매개변수 평가가 주로 수행되어왔다. 그러나 실제 구조에서 발생되는 균열선단은 구조물의 크기, 시편형상 그리고 인장과 굽힘과 같은 하중의 형태에 따라 구속효과의 차이로 인한 영향이 발생하게 된다. 단일 매개변수 파괴역학을 보완하기 위해 다양한 시도가 있었고, 대표적으로 Q-응력법이 있다. 본 논문에서는 비선형 탄성영역의 균열선단 응력장 평가에 적합한 J적분에 Q응력을 유도하여 2 매개변수 접근법을 사용하고자 한다. SENB 시편의 균열비 0.1~0.7 그리고 광폭시편 균열비 0.2~0.6에 시편 균열선단의 응력을 J-Q 평가법을 이용하여 구속효과를 정량적으로 평가 하였다.

• Physical Therapy Rehabilitation Science
• /
• 제11권4호
• /
• pp.400-408
• /
• 2022

Objective: The purpose of this study is to compare EMG activity during horticulture motion and upper limb rehabilitation motion, to confirm whether horticulture motion is suitable for upper extremity rehabilitation of hemiparesis. Design: Three-group cross-sectional design. Methods: The 45 subjects were divided into three groups: hemiparesis (n=15), elderly (n=15) and healthy (n=15). We have recorded EMG signals of six upper limb muscles Upper trapezius (UT), Middle deltoid (MD), Anterior deltoid (AD), Biceps brachii (BB), Triceps brachii (TB), Brachioradialis (BR) during horticultural motions and three upper limb rehabilitative motions. The dependent variables were peak EMG, integral EMG, co-contraction ratio. A two-way repeated measures ANOVA was used to compare the horticultural motion and rehabilitation motion of the three groups. Results: The peak EMG was significantly different in MD, AD, BB, TB according to the motion(p<0.05), and the UT, BB were significant differences according to the group(p<0.05). The integral EMG was significantly different in MD, AD, BB, TB, BR according to the motion(p<0.05), and the BB were significant differences according to the group(p<0.05). The co-contraction ratio was significantly different in TB/BB according of the motion, and there was no difference between the groups. Conclusions: As a result of this study, horticultural motion alone was insufficient for upper arm rehabilitation, and horticultural motion alone was insufficient to induce continuous activity of the forearm.