• 제어로봇시스템학회논문지
• /
• 제16권1호
• /
• pp.77-82
• /
• 2010

An analytical method for robust design of the multi-loop proportional-integral (PI) controller is proposed for various types of multi-delay processes. On the basis of the direct synthesis and generalized IMC-PID approach, the analytical tuning rules of the multi-loop PI controller are firstly derived for achieving the desired closed-loop response, and the structured singular value synthesis is then utilized for the tradeoffs between the robust stability and performance by adjusting only one design parameter (i.e., the closed-loop time constant). To verify the superiority of the proposed method, the simulation studies have been conducted on a wide variety of multivariable processes. The multi-loop PI controller designed by the proposed method shows a fast, well-balanced and robust response with the minimum integral absolute error (IAE) in compared with other renowned methods.

• Journal of Power Electronics
• /
• 제2권2호
• /
• pp.130-138
• /
• 2002

The windup phenomenon appears and degrades control performance when a controller with integrating action is used and plant input is limited. An anti-windup integal-proportional(IP) controller is proposed for the variable-speed moter drives and it is experimentally applied to the speed control of a vector-controlled induction moter driven by a pulse width modulated (PWM) voltage source inverter (VSI). The consistency range of the IP controller is firstly derived and the intergal state is controlled to salisfy always the consistency range according to whether the the controller output is saturated or not. Although the operating condition like moter load or speed command is changed under the limited plant input, It is expermentally verified that the speed response has much improved performance, such as no overshoot and fast settling time, and the maximmum plant input is also effectively utilized.

• 한국정보통신학회논문지
• /
• 제17권6호
• /
• pp.1399-1408
• /
• 2013

본 논문은 유도전동기의 제어에 있어서 성능향상을 위하여 가중치를 도입한 새로운 적분제어기법을 제안하여 $H_{\infty}$ T-S 퍼지제어기와 함께 사용하였다. $H_{\infty}$ T-S퍼지제어기는 유도전동기의 비선형성과 강인성을 위하여 사용되었고 가중치를 도입한 적분제어기는 추적문제를 조정기문제로 바꾸어 줌과 동시에 제어성능을 향상시키기 위해서 사용되었다. $H_{\infty}$ T-S퍼지제어기는 국부선형모델을 기반으로 구해지는 국부선형제어기 들의 선형결합으로 구성되며 각각의 국부 선형제어이득들은 LMI(Linear Matrix Inequlity)를 이용하여 계산된다. 본 논문에서는 가중치에 따라 결정되는 다양한 LMI해의 선택을 가능하게 함으로써 제어성능을 향상시켰다.

• 전기학회논문지
• /
• 제67권1호
• /
• pp.103-113
• /
• 2018

In this paper, an improved integral variable structure regulation controller is designed by using a special integral sliding surface and a disturbance observer for the improved regulation control of highly nonlinear rigid robot manipulators with prescribed output performance. The sliding surface having the integral state with a special initial condition is employed in this paper to exactly predetermine the ideal sliding trajectory from a given initial condition to the desired reference without any reaching phase. And a continuous sliding mode input using the disturbance observer is also introduced in order to effectively follow the predetermined sliding trajectory within the prescribed accuracy without large computation burden. The performance of the prescribed tracking accuracy to the predetermined sliding trajectory is clearly investigated in detail through the two theorems, together with the closed loop stability. The design of the proposed regulation controller is separated into the performance design and robustness design in each independent link. The usefulness of the algorithm has been demonstrated through simulation studies on the regulation control of a two-link robot under parameter uncertainties and payload variations.

• 제어로봇시스템학회논문지
• /
• 제15권10호
• /
• pp.974-981
• /
• 2009

In this paper, a method of auto-tuning of PID (Proportional-Integral-Derivative) and PIDA (Proportional-Integral-Derivative-Acceleration) controllers is proposed that can be applied to a time-delayed second order model. The proposed identification method is based on step responses, but it can be easily automated rising digital controller unlike the existing graphical identification methods. We provide a ways to yield parameter identifications which is independent to initial values of the plants. The tuning rule is based on the pole-placement strategy and is formulated so that it can be implemented using a digital controller with ease.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권6호
• /
• pp.323-332
• /
• 2003

This paper proposes a variable structure position controller for an induction motor(IM) which uses a reaching law and an integral compensating nonlinear switching function. With the integral compensating nonlinear switching function, both very low overshoot and high steady state control accuracy can be obtained by compensating the states chattering problem due to the unmodelled dynamics of inverter and feedback sensors. With the reaching law, reaching mode can be established quantitatively during transient state so that dynamic control performance is improved. For experiment a digital servo driver which consists of a DSP and an IPM inverter was developed. With the various experimental results, IM position control performance was verified.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.411-416
• /
• 2010

In this paper, an integral variable structure static output feedback controller with an integral-augmented sliding surface is designed for the improved robust control of a uncertain system under unmatched system uncertainty and matched input matrix uncertainty and disturbance satisfying some conditions. To effectively remove the reaching phase problems, an output dependent integral augmented sliding surface is proposed. Its equivalent control and ideal sliding mode dynamics are obtained. The previous some limitations is overcome in this systematic design. A stabilizing control with the closed loop exponential stability is designed for all unmatched system matrix uncertainties and proved together with the existence condition of the sliding mode on S=0. To show the usefulness of the algorithm, a design example and computer simulations are presented.

• 대한전자공학회논문지
• /
• 제23권4호
• /
• pp.445-449
• /
• 1986

This paper presents a direct adaptive control scheme for nonminimum phase systems of which controller parameters are estimated from the least-squares algorithm, and some additional auxiliadry parameters are obtianed from the proposed polynomial identity equation. Integral action is incorporated into the adaptive controller to eliminate the steady-state error, and to satisfy a condition of the unique solution for the polynomial identity as well.

• International Journal of Control, Automation, and Systems
• /
• 제3권2호
• /
• pp.217-224
• /
• 2005

Generally, the underwater flight vehicle (UFV) depth control system operates with the following problems: it is a multi-input multi-output (MIMO) system because the UFV contains both pitch and depth angle variables as well as multiple control planes, it requires robustness because of the possibility that it may encounter uncertainties such as parameter variations and disturbances, it requires a continuous control input because the system that has reduced power consumption and acoustic noise is more practical, and further, it has the speed dependency of controller parameters because the control forces of control planes depend on the operating speed. To solve these problems, an adaptive fuzzy sliding mode controller (AFSMC), which is based on the decomposition method using expert knowledge in the UFV depth control and utilizes a fuzzy basis function expansion (FBFE) and a proportional integral augmented sliding signal, is proposed. To verify the performance of the AFSMC, UFV depth control is performed. Simulation results show that the AFSMC solves all problems experienced in the UFV depth control system online.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.19-24
• /
• 2003

A new method for designing critical control systems is proposed in this paper. The controller structure is chosen as a Davison type integral controller with an observer. The proposed method consists of two steps. First, the state feedback critical control system is designed using a quadratic performance index with tunable parameters. Second, the observer gain matrix is determined by the formal LTR procedure using a Riccati equation. Consequently, the search space can be reduced considerably compared with the conventional approach. Although the proposed method sacrifices a large freedom for the choice of controller structure provided by the principle of matching, the controller structure used in this paper is not excessively complex and can be used for most applications. An illustrative design example is presented.