• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.474-475
• /
• 2008

Portable device is powered by the battery. To use portable devices longer time without replacing the battery, you should maximize the lifetime of the battery. If you use efficient DC-DC converter, You can maximize the lifetime of the battery.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.418-421
• /
• 2002

The immunity testing in this study was performed to examine the conducted immunity and radiated immunity in medical instrumentation. Experiments were performed to assess the conducted emission and radiated emission of medical instrumentation such as MRI, ultrasound system, and electro surgical unit etc. The emission testing revolves around conducted emissions (high-frequency currents) on power lines and signal cables. Emission testing also looks at the output of energy through the air (called radiated emissions) and analyzes the strength of those radio-frequency signals generated unintentionally by the electrical medical device that is under test. Finally, this study would provide significant data for furture research or electromagnetic interference and compatibility test in medical instrumentation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.915-918
• /
• 2007

We have grown $SiO_2$ film on a polycrystalline Si layer using excited ozone gas, which is produced by ultra-violet light irradiation to ozone gas, without heating substrate. The obtained $SiO_2$ film shows dielectric properties comparable to the device quality films measured at the MIS capacitor configuration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.977-979
• /
• 1995

MPEG-II is the international standard of compression for digital image and digital audio that is the most important in the multimedia environment. Now many researchers are developing relevant systems. MPEG-II consists of video, audio, system and the other part. In this paper, we have designed and demonstrated two channel audio encoder system that processes the audio compression part, and excutes layer II for complexity and psychoacoustic model II, with ADSP-21020 of Analog Device.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1380-1382
• /
• 1996

In this paper, a motion estimation module is made with ADSP-21020 based on MPEG-2 which is an international standard for moving picture compression. And, the block matching algorithm used as motion estimation method is easy for an hardware implementation. The ADSP-21020 of Analog Device is used for a main control processor. We used three block matching method (exhaustive search method, 2D-logarithmic search method, three step search method) for software simulation and implemented the three step search method to hardware. For the test of the estimation module, we used ping pong image sequences and mobile and calendar image sequences.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1577-1579
• /
• 2003

AlN thin films are prepared on Si (111) substrate by RF magnetron sputtering. Two-step deposition method is proposed to obtain AlN thin films with high c-axis (002)-TC value and low surface roughnesses. For all the deposited AlN films, the c-axis (002)-orientation, surface mophology, and roughness are characterized in terms of deposition conditions FEAR devices with Al/AlN/Mo/Si(111) configuration are also fabricated. From the frequency response characteristics, the return loss and electromechanical coupling contant($k_t{^2}$) are estimated.

• 한국전기전자재료학회논문지
• /
• 제24권6호
• /
• pp.515-518
• /
• 2011

In this work, we designed and fabricated a multilayer thin film Pb(Zr,Ti)$O_3$ cantilever with a Si proof mass for low frequency vibration energy harvesting applications. A mathematical model of a mu lti-layer composite beam was derived and applied in a parametric analysis of the piezoelectric cantilever. Finally, the dimensions of the cantilever were determined for the resonant frequency of the cantilever. W e fabricated a device with beam dimensions of about 4,930 ${\mu}M$ ${\times}$ 450 ${\mu}M$ ${\times}$ 12 ${\mu}M$, and an integrated Si proof mass with dimensions of about 1,410 ${\mu}M$ ${\times}$ 450 ${\mu}M$ ${\times}$ 450 ${\mu}M$. The resonant frequency, maximum peak voltage, and highest average power of the cantilever device were 84.5 Hz, 88 mV, and 0.166 ${\mu}Wat$ 1.0 g and 23.7 ${\Omega}$, respectively. The dimensions of the cantilever were determined for the resonance frequency of the cantilever.

• 한국정밀공학회지
• /
• 제32권7호
• /
• pp.653-660
• /
• 2015

This paper describes the design of the force measuring system for an industrial robot's deburring work. The force measuring system is composed of a three-axis force sensor, a measuring device, a housing and a cover. The three-axis force sensor can detect x-direction force, y-direction force and z-direction force at the same time. The measuring device is designed using DSP(Digital Signal Processor), and have a RS-232 and a RS-485 communication port for sending force data to PC or other controller. As a result of test, the repeatability error and the non-lineality error of the three-axis force sensor are less than 0.03%, and the interference error of the sensor is less than 0.95%. It is thought that the force measuring system can be used for an industrial robot's deburring work.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.411-414
• /
• 2005

The most recent trend on digital hearing aid is to increase the ratio of signal to noise by directivity or to develop noise reduction algorithm inside DSP IC chip. This paper designed, fabricated and tested a digital hearing aid directivity testing device in which a micro-mouse-like the stepping motor with a speaker rotates around an examinant. Both ears of the examinant were fixed with ITE hearing aids in order to response to receiving sound. The diameter of the directivity testing device was 2 [m] and the micro-mouse was precisely controlled by PICBASIC micro processor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.133-140
• /
• 2010

NMEA2000 protocol known as IEC61162-3 of Multi-talker, Multi-listener, PnP communication is adopted as standard network for SOLAS ship by ISO in 2008 for e-navigation ages. NMEA2000 network uses well known CAN in physical layer. In this paper, address claim function is implemented for protocol converter device which can be used easily in combination with CPU of non network device. We are going to implement full function of NMEA2000 protocol and provide guideline to develop ship equipment to be networked easily.