• ETRI Journal
• /
• 제46권1호
• /
• pp.71-81
• /
• 2024

Recent advances in deep learning for speech and visual recognition have accelerated the development of multimodal speech recognition, yielding many innovative results. We introduce a Korean audiovisual speech recognition corpus. This dataset comprises approximately 150 h of manually transcribed and annotated audiovisual data supplemented with additional 2000 h of untranscribed videos collected from YouTube under the Creative Commons License. The dataset is intended to be freely accessible for unrestricted research purposes. Along with the corpus, we propose an open-source framework for automatic speech recognition (ASR) and audiovisual speech recognition (AVSR). We validate the effectiveness of the corpus with evaluations using state-of-the-art ASR and AVSR techniques, capitalizing on both pretrained models and fine-tuning processes. After fine-tuning, ASR and AVSR achieve character error rates of 11.1% and 18.9%, respectively. This error difference highlights the need for improvement in AVSR techniques. We expect that our corpus will be an instrumental resource to support improvements in AVSR.

• 한국대기환경학회지
• /
• 제15권4호
• /
• pp.495-503
• /
• 1999

Airborne particulate matter $(PM_{10})$ collected using high volume air sampler and silica fiber filter were analyzed by Instrumental Neutron Activation Analysis(INAA), Inductively Coupled Plasma Atomic Emission Spectrometry(ICP-AES) and Atomic Absorption Spectrometry(AAS), and the results were compared with each other. 30~40 trace elements in environmental standard reference materials(NIST SRM 1648 and NIES CRM No.8) were analyzed for the analytical quality control. The relative error for two-third of elements detected was less than 10%, and the standard deviation was less than 15%. During the sampling period for 24 hours, the mass concentration of total suspended particulate was 36.1$\mu\textrm{g}$/㎥ and the value is lower than the critical level in Korea. In the results of NAA, the elements of Al, As, Ba, Fe, La, Mg, Na, Sb, Zn were well agreed with those of other methods. In statistical estimation between different methods, the deviation of Al, Ba, Cr, Fe was less than 10% and quite reliable.

• 한국음향학회지
• /
• 제16권3호
• /
• pp.81-85
• /
• 1997

본 논문에서는 3차와 4와의 큐뮬런트를 이용하여 FIR 시스템의 파라메터 추정을 위한 회귀 추정 알고리듬을 제안한다. 제안한 FIR 파라메터 회귀 추정 알고리듬에서 3차와 4차의 큐뮬런트 관계식으로부터 Overdetermined Recurisive Instrumental Variable (ORIV) 형태의 회귀 추정 알고리듬으로 변환할 수 있도록 출력신호로 구성된 행렬식을 얻어낸 후, 이를 전개하여 회귀 추정 알고리듬을 개발한다. 제안한 회귀 추정 알고리듬은 기존의 비회귀 알고리듬의 확장으로 적은 데이터로 수렴이 가능하며, 시변 시스템의 추정에도 용이하다. 또한 3차와 4차의 순수 고차 큐뮬런트로 구성됨에 따라 기존의 2차의 자기상관함수를 이용한 회귀 추정 알고리듬에 비해 가산 가우시안 잡음에 의한 추정 오차를 줄일 수 있는 장점이 있다.

• 전력전자학회논문지
• /
• 제8권6호
• /
• pp.569-575
• /
• 2003

본 논문에서는 스위칭 전원장치의 효율을 높은 정밀도로 측정하고 분석학 수 있는 PC 기반 가상계측 기를 구성하여 운용한 결과를 보고한 것이다. 고전압 저전류 방식에 적합한 간접 측정방식과 저전압 대전류 전원장치에 적합한 직접 측정방식의 비교를 수행하였으며, 직접 측정방식에서는 측정 편차를 최소화시키기 위해서 보상 기능을 추가하였다. 구성된 가상계측기의 성능을 검증하기 위해서 50W급 통신기용 전원장치를 대상으로 특성을 계측하였다. 그 결과 기존의 방법에 비해서 전원장치의 정상상태 특성을 정확하게 평가할 수 있으며, 반복 측정 오차를 줄일 수 있을 뿐만 아니라, 실시간 측정이 가능하며, 측정 시간도 절약할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제27권2호
• /
• pp.234-247
• /
• 1995

Trace elements in airborne particulates were analyzed by instrumental neutron activation analysis (INAA) under the optimum analytical condition. Neutron irradiation for sample was done at the irradiation hole(neutron flux 1$\times$10$^{13}$ n/$\textrm{cm}^2$.s) of TRIGA MARK-III research reactor in the Korea Atomic Energy Research Institute. For the verification of the analytical method, NIST SRM-1648 and NIES CRM No.8 ore chosen and analyzed. The accuracy and precision of the analysis of 40 and 24 trace elements in the samples were compared with the certified and reported values, respectively. The analytical method was found to be reliable enough when the analytical data of NIES sample were compared with those of different counties. In the analytical result of two or both of standard reference materials, relative standard deviation wes within the 15％ except a few elements and the relative error was within the 10％. We used this method to analyze 30 trace elements in airborne particulates collected with the high volume air sampler(PM-10) at too different locations and also confirmed the possibility to use this method as a routine monitoring tool to find out environmental pollution sources.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.677-684
• /
• 2004

This paper describes a method for identifying the dynamic characteristics of air foil bearings for high speed turbomachinerys with the LS/IV method. In fact identifying the characteristics of air foil bearings is very difficult work, and it is tried to identify it. Experiments were conducted to determine the structural dynamic and hydrodynamic characteristics of air foil bearings. Numerical predictions compare the static and dynamic force performances. The housing of the bearing on the journal was driven by the impact hammer which were used to simulate impact force acting on air foil bearings. The characteristics of air foil bearings were extracted from the frequency response function (FRF) by LS(Least Square) method and IV(Instrumental Variable) method. The experiment was tested at 0 rpm and $10000\sim16000rpm$. And the test results were introduced about the dynamic characteristics of air foil bearings, and also compared with theoritical results.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권8호
• /
• pp.347-353
• /
• 2002

This paper presents an accurate method for measuring the ground resistance in powered grounding system. Most of substations and electric power equipments are interconnected to an extensive grounding network of overhead ground wires, neutral conductors of transmission lines, cable shields, and etc. The parasitic effects due to circulating ground currents and ground potential rise make a significant error in measuring the ground resistance. The test current transition method was proposed to reduce the effects of stray ground currents, ground potential rise and harmonic components in measurements of the ground resistance for powered grounding systems. The instrumental error of the test current transition method is decreased as the ratio of the test current signal to noise(S/N) increases. It was found from the test results that the proposed measuring method of the ground resistance is more accurate than the conventional fall-of-potential method or low-pass filter method, and the measuring error was less than 3[%]when S/N is 10.

• 한국지진공학회논문집
• /
• 제13권6호
• /
• pp.27-37
• /
• 2009

지진파의 푸리에 가속도스펙트럼(Fourier Acceleration Spectrum)에 기반한 계측진도 평가방법(Sokolov and Wald, 2002)의 국내 적용성을 평가하기 위해 관련 논문(연관희 등, 2009)에서 평가된 국내 지진의 진도 MMI ${leq}$ IV 범위에 대한 진도별 FAS 평균(m)과 표준편차(${\sigma}$) 모델을 이용하여, FAS 진도평가방법의 타당성을 평가하여 보았다. FAS 통계특성 모델 평가시 사용된 지진관측자 료의 FAS를 이용하고 본 연구에서 프로그램으로 구현된 FAS 진도평가기법을 적용할 경우 관측된 진도를 ${\sigma}$ = 0.74 MMI의 오차로 추정할 수 있었으며, 오차의 지진규모-거리 의존성을 추가로 보정할 경우 오차를 ${\sigma}$ = 0.61 MMI 까지도 저감할 수 있었다. 또한 본 방법을 MMI ${\leq}$ IV에 대한 국내 FAS 통계특성 모델과 MMI ${\geq}$ V에 대한 전 세계 FAS 통계특성 모델을 함께 이용하여, 진도 VI 이상인 국내 피해지진의 진도를 미소지진관측자료의 지진원특성을 이론적으로 증가시켜 도출된 스펙트럼을 이용하여 추정한 결과 최대 진도추정 오차 0.63 이내로 예측할 수 있었다.

• 한국측량학회지
• /
• 제16권2호
• /
• pp.291-297
• /
• 1998

일반적으로 수치지도제작을 수행하기 위해서는 종이에 인쇄된 원도를 컴퓨터상에서 작업할 수 있는 수치자료로 변환하는 자료입력과정과 작업이 끝난 자료를 출력하는 도면출력과정에 입출력장비가 이용된다. 본 연구에서는 수치지도 작업과정에 수반되는 입력장비중 벡터형태의 자료를 직접적으로 생성할 수 있는 장점에 의해 부분 도화된 수정도화 원도의 입력시 주로 이용되는 디지타이저와, 작업의 용이성 에 의해 주로 원도의 입력과정에 이용되는 스캐너에 대해 작업방법 및 입출력장비 특성에 따른 위치오차를 분석하였으며, 출력장비에 따른 위치오차분석에서는 플로터방식과 출력도면의 재질에 따른 위치정확도를 분석하였다.

• 환경영향평가
• /
• 제19권4호
• /
• pp.421-429
• /
• 2010

The reliability of the measurement of ambient trace species is an important issue, especially, in background area such as Gosan in Jeju Island. In a previous episodic study, it was suggested that the PM10 measurement result by the gravimetric method(GMM) was not in agreement with the result by the ${\beta}$-ray absorption method(BAM). In this study, a systematic comparison was carried out for the data between 2001 and 2008 at Gosan(GMM and BAM) and Jeju city (BAM) which is near to Gosan. It was found that at Gosan the PM10 concentration by BAM was higher than GMM and the correlation between them was low. The BAM results at Gosan and Jeju city showed similar trend implying the discrepancy at Gosan was not caused by instrumental problem of the BAM at Gosan. Based on the previous studies two probable reasons for the discrepancy are identified; (1) negative measurement error by the evaporation of volatile ambient species at the filter in GMM such as nitrate and ammonium and (2) positive error by the absorption of water vapor during measurement in BAM. There was no heater at the inlet of BAM at Gosan during the sampling period. Based on the size-segregated measurement data, it was identified that the evaporation error was minor, if any. The relationship between the two methods did not vary with the ambient relative humidity. Thus, at present, it is not clear why the discrepancy had been occurring and when using the PM10 data at Gosan, one should be aware the possible errors.