• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1055-1062
• /
• 2023

Globally, the need for remanufacturing or reusing ships and various mechanical parts continues to increase due to environmental problems including global warming. Research on remanufacturing is being carried out in many areas. However, research on inspection and classification to identify the performance or degree of wear of mechanical parts is insufficient. In particular, studies on the inspection-ability and classification-ability of mechanical parts equipped with various materials and complex forms are highly required. Remanufacturing must be considered from the stage of design to extend the life cycle of mechanical parts. Particularly, it is very important to perform research for evaluating the degree of ease to inspect and classify various sorts of wear or deterioration of parts caused by long-term use easily. In this study, the degree of ease in inspecting or classifying mechanical parts for remanufacturing is defined as inspection-ability and classification-ability. In fact, to remanufacture old parts, inspection-ability and classification-ability should be reflected from the stage of design. The purpose of this study is to evaluate the inspection-ability and classification-ability of ships and various mechanical parts. This researcher has presented the quantitative evaluation procedure of inspection-ability and classification-ability, derived the factors and ranges that influence each of the details of easiness, assigned scores according to the ranges of the factors, and calculated weights. Lastly, this study presents the procedure of scoring to evaluate the overall weights of inspection-ability and classification-ability and also inspection-ability and classification-ability quantitatively.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.76-83
• /
• 2008

In the course of increasing in human and material damage caused by fire, it is an important research field to develop clean extinguishing agent which does no harm to global environment as well as has a good extinguishing efficiency. This research is a basic step to develop a new clean extinguishing agent. In order to get a satisfactory result, we tested fire extinguishing ability using nitrogen and Novec mixtures gas which are inert gas and new clean extinguishing agent. We used Cup Burner Test made by international standard ISO-14520 regulations of gaseous extinguishing agent ability test, and the fuels used in the test are n-heptane, methanol, ethanol, iso-propanol and 1-butanol. The experimental results of flame extinguishing concentration are n-heptane 6.54%, methanol 8.47%, ethanol 6.98%, isopropanol 6.10% and butanol 6.54% by pure Novec agent. So the finding is that a new clean agent, Novec has an efficient extinguishing ability in a state of gas. Also, in a test as to mixtures gas of nitrogen and Novec, it has a good result for minimum oxygen concentration is under 16%.

• Journal of Gifted/Talented Education
• /
• v.20 no.1
• /
• pp.1-30
• /
• 2010

The purpose of this study was to develop the inspection model of cognitive ability to identify visual artistic giftedness of the elementary school children with considering the relation between visual artistic giftedness and cognitive ability based on literature and preceding research. The research method applied literature research and quantitative research. Through literature review on the relation between art education and cognitive thinking and visual artistic of giftedness, it was suggested to prescribe the validity of cognitive ability as an element for identification of visual artistic giftedness identification, and then prescribed the elements of cognitive ability, and developed the inspection model of cognitive ability by measuring specific variables. Based on the results of literature research through the quantitative research, verified significance of developed inspection instrument on cognitive ability, validity and reliability of the inspection model of cognitive ability according to visual artistic giftedness identification of the elementary school children. As a result of reviewing related literature and preceding research, it could be referred that visual thinking ability, spatial perception power and critical thinking ability coincided with a characteristic of an art field can show excellent ability in various art activities and be valid criteria of visual artistic giftedness as cognitive ability of the visual artistic gifted with potential possibilities. In conclusion, as the elements of cognitive ability for the visual artistic giftedness identification of the elementary school children, visual thinking ability, spatial perception power and critical thinking ability were verified to be valid in terms of logical and experimental. Therefore, the result of the research will be able to provide a new approach in education program development of visual artistic giftedness of the elementary school children and a various developmental possibility in identification of visual artistic giftedness.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.456-460
• /
• 2008

This study was on basic step to develop a good clean extinguishing agent. In order to get a satisfactory result, we tested fire extinguishing ability using Novec which is inert gas. In study used to Cup Burner Test its made by international standard ISO-14520 regulations of gaseous extinguishing agent ability test. The finding is that a new clean agent, Novec has a very efficient extinguishing ability in a state of gas.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.191-195
• /
• 2003

The formation degree of sustain (ITO pattern) decides quality of PDP (plasma display panel). For this reason. it makes efforts in search defects more than 30 ${\mu}{\textrm}{m}$. Now, the existing inspection process is dependent upon naked eye or SEM equipment in off-line PDP manufacturing process. In this study developed prototype inspection system of PDP ITO glass. This system creates information that detects and sorts kind of defect automatically. Design ed inspection technology adopts line-scan method by slip-beam formation for the minimum of inspection time and image processing algorithm is embodied in detection ability of developed system. Designed algorithm had to make good use of kernel matrix which draws up an approach to geometry. A characteristic of area-shaped defects, as pin hole, substance, protrusion et al, are extracted from blob analysis method. Defects, as open, short, spots, et al, are distinguished by line type inspection algorithm. In experiment results, we could have ensured ability of inspection that can be detected with reliability of up to 95% in about 60 seconds

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.92-99
• /
• 2004

The formation degree of sustain (ITO pattern) decides quality of PDP (Plasma Display Panel). For this reason, it makes efforts in searching defects more than 30 un as 100%. Now, the existing inspection is dependent upon naked eye or microscope in off-line PDP manufacturing process. In this study developed prototype inspection system of PDP 170 glass is based on line-scan mechanism. Developed system creates information that detects and sorts kinds of defect automatically. Designed inspection technology adopts multi-vision method by slip-beam formation for the minimum of inspection time and detection algorithm is embodied in detection ability of developed system. Designed algorithm had to make good use of kernel matrix that draws up an approach to geometry. A characteristic of defects, as pin hole, substance, protrusion, are extracted from blob analysis method. Defects, as open, short, spots and et al, are distinguished by line type inspection algorithm. In experiment, we could have ensured ability of inspection that can be detected with reliability of up to 95% in about 60 seconds.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.2
• /
• pp.69-80
• /
• 2024

Currently rebar spacing inspection is carried out by human inspectors who heavily rely on their individual experience, lacking a guarantee of objectivity and accuracy in the inspection process. In addition, if incorrectly placed rebars are identified, the inspector need to correct them. Recently, laser scanning and AR technologies have been widely used because of their merits of measurement accuracy and visualization. This study proposes a technology for rebar spacing inspection and fixing by combining laser scanning and AR technology. First, scan data acquisition of rebar layers is performed and the raw scan data is processed. Second, AR-based visualization and fixing are performed by comparing the design model with the model generated from the scan data. To verify the developed technique, performance comparison test is conducted by comparing with existing drawing-based method in terms of inspection time, error detection rate, cognitive load, and situational awareness ability. It is found from the result of the experiment that the AR-based rebar inspection and fixing technology is faster than the drawing-based method, but there was no significant difference between the two groups in error identification rate, cognitive load, and situational awareness ability. Based on the experimental results, the proposed AR-based rebar spacing inspection and fixing technology is expected to be highly useful throughout the construction industry.

• Information and Communications Magazine
• /
• v.24 no.11
• /
• pp.25-36
• /
• 2007

Deep packet inspection is widely recognized as a powerful way which is used for intrusion detection systems for inspecting, deterring and deflecting malicious attacks over the network. Fundamentally, almost intrusion detection systems have the ability to search through packets and identify contents that match with known attach. In this paper we survey the deep packet inspection implementations techniques, research challenges and algorithm. Finally, we provide a comparison between the different applied system.

• Journal of Educational Research in Mathematics
• /
• v.21 no.3
• /
• pp.279-294
• /
• 2011

The purposes of this study are to confirm the standard of ethical judgement ability of the mathematically gifted students and examine which factor makes on the ethical judgement ability among the mathematically behavior characteristics. For it, correlation analysis and regression analysis between the two things were conducted with SPSS 12.0 based on the results of mathematically behavior characteristic inspection and ethical judgement ability inspection. Also, the interview was conducted for students whose KDIT score is the highest and the results were intended to apply the results as the material supporting the results of qualitative test results. The interview with students examined which mathematically behavior characteristic factor made an effect on his own ethical judgement ability through the structural questionnaires.

• Korean Journal of Veterinary Research
• /
• v.53 no.1
• /
• pp.29-35
• /
• 2013

To develop a live vaccine candidate using an attenuated strain of Salmonella Typhimurium (ST), biochemical properties, plasmid profile, PFGE patterns and pathogenic analysis of the ST isolate were carried out after sequential passage of the ST isolate in porcine neutrophils. By the passage, the ability of the neutrophil-adapted isolate to utilize d-xylose was lost, while the ability of the strain to ferment trehalose was delayed after 2 or more days of the culture. Also, changes including deletion of the gene fragments were observed in PFGE analysis of the neutrophil-adapted isolates. Two plasmids, 105kb and 50kb, were cured in the strain passaged over 15 times in porcine neutrophils. The 50% of lethal dose ($LD_{50}$) of the parent strain was changed from $1{\times}10^5\;LD_{50}$ to $6{\times}10^6\;LD_{50}$ by the passage in intraperitoneal injection of the strains into mice. These results suggested that bacterial genotypic and phenotypic responses might be globally altered depending on the inside environment of neutrophils.