• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제7권2호
• /
• pp.50-55
• /
• 2008

In this paper, multi-band internal antenna which can adjust both resonant frequency and input impedance of antenna as using lumped inductor between shoring plate and ground plane is proposed. The structure of proposed antenna consists of PIFA (Planar Inverted F Antenna) structure and half-wavelength loaded line structure and has two shorting plates and one feeding plate. One shorting plate is shared. The operating frequency bands of designed antenna are GSM, GPS in the PIFA structure and DCS, US-PCS, W-CDMA in half-wave loaded line structure as varying the inductor value in 2.2nH, 3.3nH, and 4.7nH. As varying the inductor value in the shared shorting plate, input impedance of antenna is varied. To minimize the gain variation of antenna as adding lumped element, the inductor value is restricted at maximum of 6.8nH. The maximum gain of proposed antenna is measured as -1.60dBi in the GSM band, -1.16dBi in the GPS band, and 1.41dBi in the DCS/US-PCS/W-CDMA band.

• Development and Reproduction
• /
• 제15권3호
• /
• pp.265-272
• /
• 2011

It is well known that adipose tissue or body fat has been proved as a crucial component of brain-peripheral axis which can modulate the activities of reproductive hormonal axis in female mammals including rodents and human. Concerning the male reproduction, however, the role of adipose tissue has not been thoroughly studied. The present study was carried out to elucidate the effect of a high-fat (HF) diet on the reproductive system of postpubertal male rats. The HF diet (45% energy from fat, HF group) was applied to male rats from week 8 after birth for 4 weeks. The blood glucose levels, body and tissue weights were measured. Histological studies were performed to assess the structural alterations in the reproductive tissues. To determine the transcriptional changes of reproductive hormone-related genes in hypothalamus and pituitary, total RNAs were extracted and applied to the semi-quantitative reverse transcription polymerase chain reaction (RT-PCR). Body weights (p<0.01) and blood glucose levels (p<0.01) of HF group were significantly higher than those of control animals. Similarly, the weights of epididymis (p<0.05), prostate (p<0.01), seminal vesicle (p<0.01) in HF group were higher than control levels. The weights of testis were not changed. The weights of kidney (p<0.001) and spleen (p<0.01) were significantly higher than control levels while the adrenal and pancreas weights were not changed. There were only slight alterations in the microstructures of accessory sex organs; the shape of luminal epithelial cells in epididymis from HF group were relatively thicker and bigger than those from control animals. In the semi-quantitative RT-PCR studies, the mRNA levels of hypothalamic GnRH (p<0.05) in HF group were significantly higher than those from the control animals. The mRNA levels of kisspeptin in HF group tend to be higher than control levels, the difference was not significant. Unlike the hypothalamic GnRH expression, the mRNA levels of pituitary $LH{\beta}$ and $FSH{\beta}$ were significantly decreased in HF group (p<0.05). The present study indicated that the 4-weeks feeding HF diet during the postpubertal period can alter the hypothalamus-pituitary (H-P) neuroendocrine reproductive system These results suggest that the increased body fat and the altered leptin input might disturb the H-P reproductive hormonal activities in male rats, and the changed activities seem to be responsible for the changes of tissue weights in accessory sex organs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권5호
• /
• pp.621-628
• /
• 2004

Twenty male buffalo calves of 6-9 months of age (average body weight, 97 kg) were randomly allocated into two main groups of four (control) and sixteen (supplemented) calves. The supplemented group was further divided in to four equal sub-groups, with the two groups supplemented with a liquid preparation of urea-molasses, UML1, containing fish meal and UML2, containing formaldehyde treated deoiled mustard cake (FDMC) and the other two, with a semi-solid preparation, UMC1 with FDMC and deoiled rice bran (DORB) contributing similar level of CP as in UML2 and UMC2 with double the level of FDMC to that in UMC1. The control group was fed with DORB along with ad libitum wheat straw at 40:60 ratios. The rest of the groups were fed on the above diet supplemented with 500 g (as fed basis) of urea-molasses preparations. The experimental feeding was carried out for 24 weeks including a metabolism trial towards the end of experimental feeding. Daily feed intake and fortnightly change in live weight were also recorded during the study. Catalytic supplementation of 500 g urea-molasses induced 8-25% higher voluntary feed intake of wheat straw, resulting in 15-25% higher DM and OM intake. The digestibility of DM, OM, total carbohydrate, NDF, ADF, hemicellulose and cellulose in all the dietary groups were comparable. The CP digestibility of calves in supplemented groups were higher (p<0.05) than the control group. The balance of nutrients, viz. N, Ca and P, was also higher in the supplemented groups. Significantly higher intake of digestible CP coupled with other digestible nutrients attributed to higher TDN (1.67-1.78 vs. 1.37 kg) and ME (5.94-6.31 vs. 4.87 Mcal) intake in urea-molasses supplemented groups which resulted in higher live weight gain compared to that in control group (p<0.01). Between the supplements, UML2 and UMC2 faired non-significantly, indicating formalin treated mustard cake as a suitable replacement to fishmeal in the supplement. The overall ranking based on intake and digestibility of nutrients, live weight gain, economic evaluation and input-output relationship revealed that the rations with UML2 and UMC1 to be of greater value compared to other types. From the study it can be concluded that young ruminants can be reared successfully on a basal diet of deoiled rice bran and wheat straw supplemented with cheaper urea-molasses-mineral mix.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제22권7호
• /
• pp.683-693
• /
• 2011

In this paper, a design of high current and broad-band microwave bias-tee was presented for a stable bias of a high power amplifier. An input impedance of bias-tee should be shown to 50 ohm with the wideband in order to be stably-biased the amplifier. For this design of the bias-tee, a capacitor of bias-tee for a DC block was designed with a high wide-band admittance by a parallel sum of capacitors, and a inductor for a RF choke and a DC feeding was designed with a high wide-band impedance by a series sum of inductors. As this inductor and capacitor for the sum has each SRF, band-limitation of lumped element was driven from SRF. This limitation was overcome by control of a resonance's quality factor with adding a resistor. 1608 SMD chips for design's element was mounted on the this pattern for the designed bias-tee. The fabricated bias-tee presented 10 dB of return loss and wide-band about 50 ohm input impedance at 10 MHz~10 GHz.

• International Journal of Control, Automation, and Systems
• /
• 제5권6호
• /
• pp.643-651
• /
• 2007

The various blood pressure simulators have been proposed to evaluate and improve the performance of the automatic sphygmomanometer. These have some problems such as the deviation of the actual blood pressure waveform, limitation in the blood pressure condition of the simulator, or difficulty in displaying the blood flow. An improved simulator using disturbance observer is proposed to supplement the current problems of the blood pressure simulator. The proposed simulator has an artificial arm model capable of feeding appropriate fluids that can generate the blood pressure waveform to evaluate the automatic sphygmomanometer. A controller was designed and thereafter, simulation was performed to control the output signal with respect to the reference input in the fluid dynamic model using the proposed proportional control valve. To minimize the external fluctuation of pressure applied to the artificial arm, a disturbance observer was designed on the plant. A hybrid controller combined with a proportional controller and feed-forward controller was fabricated after applying a disturbance observer to the control plant. Comparison of the simulations between the conventional proportional controller and the proposed hybrid controller indicated that even though the former showed good control performance without disturbance, it was affected by the disturbance signal induced by the cuff. The latter exhibited an excellent performance under both situations.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• 제35D권9호
• /
• pp.13-19
• /
• 1998

It was shown that the bandwidth of T-shaped microstripline fed slot antenna is wider than many of the conventional feeding structures. In this paper, we proposed a new method of enhancing the bandwidth of T-shaped microstripline fed slot antenna with a shunt open stub, and analyzed this antenna by using the FDTD method. We have computed waves and electric field distribution in the time domain, and VSWR, input impedance and radiation pattern in the frequency domaim by Fourier transforming the time domain results. It was found that the bandwidth of this antenna depend on the position(L$_1$) and length(L$_2$) of a shunt open stub. When these parameters are L$_1$=30 mm and L$_2$=33mm, we obtained the maximum bandwidth at the center frequency of 2.3 GHz. From the computed results, the optimum antenna is designed and fabricated. The fractional bandwidth of this antenna was 53.9 %. The measured results were in relatively good accordance with computed values.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제20권6호
• /
• pp.1049-1056
• /
• 2016

In this paper, a design method for a compact dual-band slot antenna with bent slot is studied. Bent slots are added on the rectangular slot of the proposed antenna for dual-band operation. The rectangular slot is fed by a coaxial cable by placing a rectangular feeding patch inside the slot. When the bent slots are added onto the both corner of the upper side of the rectangular slot symmetrically, a new resonant frequency is created in low frequency because of the increasement of the slot length. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 4.50-8.30 GHz band including 5GHz WLAN band is fabricated on an FR4 substrate with a dimension of 30 mm by 30 mm. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.40-2.49 GHz and 4.33-9.85 GHz for an input reflection coefficient < -10 dB.

• Journal of Energy Engineering
• /
• 제23권3호
• /
• pp.203-210
• /
• 2014

In this study, combustion behaviour were to analyze by comparing experimental data against predicted values. In developing pellet boiler performance, various factors such as combustion chamber shape, input air velocity, the amount of fuel, temperature, and fuel characteristics need to be analyzed. Analytical model using a numerical method is useful to overcome time and cost consuming by practical experiment. By controlling feeding rate of fuel, flue gas composition and temperature distribution obtained form experiment were compared with predicted values using FLUENT(ANSYS, Inc., Southpointe). Measurement were in good agreement with model predictions : with 0.60 % for $CO_2$ 0.73% for $O_2$ when compared with independent data sets.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제21권6호
• /
• pp.660-669
• /
• 2010

In this paper, a multiple antenna system for next generation mobile applications is proposed. The proposed MIMO antenna consists of two parallel folded monopole antennas with the length of 100 mm and spacing of 6 mm and a decoupling network which locates at the top side of a mobile handset. In order to improve the isolation characteristic at the LTE band 13, a decoupling network was added between the two antenna elements placed close to each other. The decoupling network, consisting of two transmission lines, a shunt reactive component and common ground line, is simple and compact. To obtain the wide bandwidth characteristic, an wide folded patch structure generating the strong coupling between feeding and shorting lines through the slit is used at the bottom side of a mobile handset. Also, the performance of a multiple antenna system composed of three antenna elements is analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제20권8호
• /
• pp.721-728
• /
• 2009

Equal/unequal 4-way power divider suitable for satellite communication using SIW technology is presented in this paper. The control of positions of guiding posts provides equal or unequal power division ratios by maintaining the width of the SIW unchanged. In addition, the detailed descriptions for the proposed power divider include the general characteristics of radial waveguide, feeding part using coaxial cable, simple SIW structure, power-guiding posts, and transition for measurement. The comparison between the simulated and measured data shows a good agreement at a center frequency of 10 GHz. The measured input impedance bandwidths for equal and unequal power divisions are about 2.1 GHz and 3 GHz under the condition of less than VSWR 2:1, respectively.