DOI QR코드

DOI QR Code

4-Way Power Divider Based on Substrate Integrated Waveguide for Satellite Communications

기판 집적 도파관 기술을 이용한 위성 통신용 4분기 전력 분배기

  • Seo, Tae-Yoon (School of Electronics, Telecommunication and Computer Engineering, Korea Aerospace University) ;
  • Lee, Jae-Wook (School of Electronics, Telecommunication and Computer Engineering, Korea Aerospace University) ;
  • Lee, Taek-Kyung (School of Electronics, Telecommunication and Computer Engineering, Korea Aerospace University) ;
  • Cho, Choon-Sik (School of Electronics, Telecommunication and Computer Engineering, Korea Aerospace University)
  • 서태윤 (한국항공대학교 항공전자 및 정보통신공학부) ;
  • 이재욱 (한국항공대학교 항공전자 및 정보통신공학부) ;
  • 이택정 (한국항공대학교 항공전자 및 정보통신공학부) ;
  • 조춘식 (한국항공대학교 항공전자 및 정보통신공학부)
  • Published : 2009.08.31

Abstract

Equal/unequal 4-way power divider suitable for satellite communication using SIW technology is presented in this paper. The control of positions of guiding posts provides equal or unequal power division ratios by maintaining the width of the SIW unchanged. In addition, the detailed descriptions for the proposed power divider include the general characteristics of radial waveguide, feeding part using coaxial cable, simple SIW structure, power-guiding posts, and transition for measurement. The comparison between the simulated and measured data shows a good agreement at a center frequency of 10 GHz. The measured input impedance bandwidths for equal and unequal power divisions are about 2.1 GHz and 3 GHz under the condition of less than VSWR 2:1, respectively.

본 논문에서는 기판 집적 도파관(Substrate Integrated Waveguide: SIW) 기술을 이용한 위성통신용 전력 분배기를 제안하였다. 출력 구형 도파관의 크기를 변화시키지 않고, 가이딩 포스트의 위치를 조절하여 등분 비등분의 전력 분배 비율을 조절하였다. 또한, 방사형 도파관의 기본적인 특성과 입력부, 전력 분배의 과정을 자세히 설명하였다. 방사형 도파관의 신호 여기 방법으로 전류 프로브를 사용하여 동축 케이블로 구현하였으며, 출력부는 마이크로스트립 선로를 천이 구조를 이용하여 SMA 커넥터를 이용하였다. 설계된 4분기 전력 분배기는 등분/비등분으로 동작할 수 있으며, 설계 결과를 시뮬레이션과 제작으로 검증하였다. 등분/비등분 전력 분배기의 측정된 결과는 VSWR 2:1을 기준 대역특이 약 2.1 GHz와 3 GHz이다.

Keywords

References

  1. W. G. Yeo, T. Y. Seo, J. W. Lee, and C. S. Cho, "H-plane sectoral filtering horn antenna in PCB substrate using via fences at millimeter-wave", 37th European Microwave Conference Proceedings, pp. 818-821, Oct. 2007
  2. K. Song, Y. Fan, and X. Zhou, "X-band broadband substrate integrated rectangular waveguide power divider", Electron. Lett., vol. 44, no. 3, pp. 211-213, Jan. 2008 https://doi.org/10.1049/el:20083516
  3. K. Song, Y. Fan, "Broadband travelling-wave power divider based on substrate integrated rectangular waveguide", Electron. Lett., vol. 45, no. 12, pp, 631-632, Jun. 2009 https://doi.org/10.1049/el.2009.0116
  4. N. Marcuvitz, Waveguide Handbook, M. I. T. Rad. Lab. Ser., vol. 10, New York: McGraw-Hill, 1951
  5. S. Chen, "A radial waveguide power divider for Ka band phased array antenns", Proceedings ICMMT 2002, 3'rd International Conference on Microwave and Millimeter Wave Tech., pp. 948-951, Aug. 2002
  6. A. G. Williamson, "Radial-line/coaxial-line stepped junction", IEEE Trans. Microwave Theory and Tech., vol. MTT-33, no. 1, pp. 56-59, Jan. 1985 https://doi.org/10.1109/TMTT.1985.1132946
  7. R. Shavit, L. Pazin, Y. Israeli, M. Sigalov, and Y. Leviatan, "Dual frequency and dual circular polarization microstrip nonresonant array pin-fed from a radial line", IEEE Trans. Antennas and Propag., vol. 53, no. 12, pp. 3897-3905, Dec. 2005 https://doi.org/10.1109/TAP.2005.859911
  8. K. Song, Y. Fan, and T. Zhang, "Eight-way substrate integrated waveguide power divider with low insertion loss", IEEE Trans. Microwave Theory and Tech., vol. 56, no. 6, pp. 1473-1477, Jun. 2008 https://doi.org/10.1109/TMTT.2008.923897
  9. L. Yan, W. Hong, K. Wu, and T. J. Cui, "Investigations on the propagation characteristics of the substrate integrated waveguide based on the method of lines", IEE Proc. Microw. Antennas Propag., vol. 152, no. 1, pp. 35-42, Feb. 2005 https://doi.org/10.1049/ip-map:20040726
  10. D. Deslandes, K. Wu, "Integrated microstrip and rectangular waveguide in planar form", IEEE Microw. and Wireless Compon. Lett., vol. 11, no. 2, pp. 68-70, Feb. 2001 https://doi.org/10.1109/7260.914305
  11. T. Djerafi, K. Wu, "Super-compact substrate integrated waveguide cruciform directional coupler", IEEE Microw. and Wireless Compon. Lett., vol. 17, no. 11, Nov. 2007
  12. F. Xu, K. Wu, "Guided-wave and leakage characteristics of substrate integrated waveguide", IEEE Trans. Microwave Theory and Tech., vol. 53, no. 1, pp. 66-73, Jan. 2005 https://doi.org/10.1109/TMTT.2004.839303