• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.276-279
• /
• 2011

This work, the etching characteristics of $Ba_2Ti_9O_{20}$(BTO) thin films were investigated using an inductively coupled plasma (ICP) of $Ar/Cl_2$ gas mixture. The etch rate of BTO thin films as well as the $BTO/SiO_2$ and BTO/PR etch selectivity were measured as functions of $Ar/Cl_2$ mixing ratio (0~100% Ar) at a constants gas pressure (6 mTorr), total gas flow rate (50 sccm), input power (700 W) and bias power (200 W). The etch rate of BTO thin films decreased with increasing Ar fraction. To analyze the etching mechanism an optical emission spectroscopy (OES), double Langmuir probe(DLP) and surface analysis using X-ray photoelectron spectroscopy (XPS) were carried out.

• Steel and Composite Structures
• /
• 제27권6호
• /
• pp.703-716
• /
• 2018

In this study, the different energy demands in reinforced concrete (RC) wall piers, coupled by buckling restrained braces (BRBs), are investigated. As well as this, a single plastic hinge approach (SPH) and an extended plastic hinge (EPH) approach is considered for the wall piers. In the SPH approach, plasticity can extend only in the 0.1H adjacent to the wall base while, in the EPH approach, the plasticity can extend anywhere in the wall. The seismic behavior of 10-, 20- and 30-storey structures, subjected to near-fault (NF) as well as far-fault (FF) earthquakes, is studied with respect to the energy concepts involved in each storey. Different kinds of energy, including inelastic, damping, kinetic, elastic and total input energy demand, are investigated. The energy contribution from the wall piers, as well as the BRBs in each model, are studied. On average, for EPH approach, the inelastic demand portion pertaining to the BRBs for NF and FF records, is more than 60 and 80%, respectively. In the SPH approach, these ratios are 77 and 90% for the NF and FF events, respectively. It appears that utilizing the BRBs as energy dissipation members between two wall piers is an efficient concept.

• 전자공학회논문지D
• /
• 제35D권12호
• /
• pp.1-11
• /
• 1998

고속펄스 전송을 위한 다중결합된 마이크로스트립 신호버스에서 제일 근접한 선로상에 유기되는 누화피크치를 최소화시키기 위해 선로자태를 합성시키는 방법을 제안하였다. 평행하게 배열된 데이터버스에서 구동선로로부터의 누화에너지는 가장 근접한 선로에 거의 집중되므로 반사파 제어를 위한 최적화기법을 통해 선로간의 평균간격을 늘리는 방법을 채택하였다. 입출력 파형예측을 위해 일반화된 S-행렬 기법을 적용하였으며 선로간의 평균간격을 늘리기 위해 합성된 다양한 형태의 비일정선로의 누화특성을 비교 분석하였다. 그 결과 펄스가 갖는 주파수 범위내에서 스펙트럼을 고르게 반사시키게 하는, dip을 갖는 쳬비셰프형 테이퍼가 입출력 파형의 보전성에 큰 영향을 주지 않는 범위내에서 누화피크치를 최소로 함을 볼 수 있었다.

• 대한전자공학회논문지TC
• /
• 제37권12호
• /
• pp.32-37
• /
• 2000

T-모양 급전선을 갖는 개구-결합 마이크로스트립 안테나인 새로운 방법을 제안하였다. 시간영역 유한차분(FDTD) 법을 적용하여 안테나의 특성들을 해석하고, 최대 대역폭을 갖는 안테나를 설계하였다. 안테나를 모델링하여 파의 진행과정과 전계분포를 시간 영역에서 계산하였다. 그리고 FDTD 법으로 얻은 값들을 Fourier 변환시켜 반사손실, 전압 정재파비, 입력 임피던스를 주파수 영역에서 각각 계산하였다. 패치의 길이와 폭, 슬롯의 길이와 폭, T-모양 급전선의 길이, offset 따라 대역폭이 변하였다. 측정된 % 대역폭은 중심 주파수 2.5 GHz에서 49.2 ％의 광대역 특성을 얻었으며, 이들 결과들은 계산값과 비교적 잘 일치하였 다.

• Journal of Information Technology Applications and Management
• /
• 제12권2호
• /
• pp.129-143
• /
• 2005

In recent years, two major streams in medical information systems are：1) system integration among OCS(Order Communication System), EMR(Electronic Medical Record), PACS(Picture Archiving and Communication System), and ERP(Enterprise Resource Planning) and 2) system integration through medical collaboration between East and West medical service providers. One of the characteristics which differentiate the Korean medical industry from the western medical industry is the East-West medical collaboration. In many respects there are many differences between East and West medical treatment. Although East and West medical treatment have developed from different medical philosophies and standards, we assume that the better medical care can be provided by integrating their medical procedures effectively. The two possible approaches to the integration of East and West medical information systems are suggested in this paper：One is loosely coupled model and the other is tightly coupled model. EMR improves the quality of medical record which reflects the quality of clinical practice. It provides more efficient and convenient way of input, retrieval, storage, communication and management of medical data. We abstracted the standard medical procedures from the two medical procedures performed in Daejeon Oriental Hospital and Hehwa Clinic at Daejeon University and also abstracted database schema by analyzing the characteristics of information needed in East-West medical collaboration. Our EMR is composed of two types of data：one is structured data and the other is unstructured data, which are formalized by SOAP(Subjective, Objective, Assessment, Plan) format. Currently the integrated system is implemented and operated successfully for six months.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1187-1194
• /
• 2017

In this paper, a high step-up DC-DC PWM converter with continuous input current and low voltage stress is presented for renewable energy application. The proposed converter is composed of a boost converter integrated with an auxiliary step-up circuit. The auxiliary circuit uses an additional coupled inductor and a balancing capacitor with voltage doubler and switching capacitor technique to achieve high step-up voltage gain with an appropriate switch duty cycle. The switched capacitors are charged in parallel and discharged in series by the coupled inductor, stacking on the output capacitor. In the proposed converter, the voltage stress on the main switch is clamped, so a low voltage switch with low ON resistance can be used to reduce the conduction loss which results in the efficiency improvement. A detailed discussion on the operating principle and steady-state analyses are presented in the paper. To justify the theoretical analysis, experimental results of a 200W 40/400V prototype is presented. In addition, the conducted electromagnetic emissions are measured which shows a good EMC performance.

• 한국전기전자재료학회논문지
• /
• 제24권6호
• /
• pp.445-448
• /
• 2011

In this study, the etching characteristics of $Al_2O_3$ thin films were investigated using an ICP (inductively coupled plasma) of $BCl_3$/Ar gas mixture. The etch rate of $Al_2O_3$ thin films as well as the $SiO_2/Al_2O_3$ etch selectivity were measured as functions of $BCl_3$/Ar mixing ratio (0~100% Ar) at a constant gas pressure (10 mTorr), total gas flow rate (40 sccm), input power (800 W) and bias power (100 W). The behavior of the $Al_2O_3$ etch rate was shown to be quite typical for ion-assisted etch processes with a dominant chemical etch pathway. To analyze the etching mechanism using DLP (double langmuir probe), OES (optical emission spectroscopy) and surface analysis using XPS (x-ray photoelectron spectroscopy) were carried out.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.645-654
• /
• 2019

In this paper, a new high step up DC/DC converter with a modified super-lift technique is presented. The coupled inductor technique is combined with the super-lift technique to provide a tenfold or more voltage gain with a proper duty cycle and a low turn ratio. Due to a high conversion ratio, the voltage stress on the semiconductor devices is reduced. As a result, low voltage ultra-fast recovery diodes and low on resistance MOSFET can be used, which improves the reverse recovery problems and conduction losses. This converter employs a passive clamp circuit to recycle the energy stored in the leakage inductance. The proposed convertor features a high conversion ratio with a low turn ratio, low voltage stress, low reverse recovery losses, omission of the inrush currents of the switch capacitor loops, high efficiency, small volume and reduced cost. This converter is suitable for renewable energy applications. The operational principle and a steady-state analysis of the proposed converter are presented in details. A 200W, 30V input, 380V output laboratory prototype circuit is implemented to confirm the theoretical analysis.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1813-1824
• /
• 2022

This paper shows the verification work of SARAX code system in the reactor core transient calculation based on the simplified EBR-II Benchmark. The SARAX code system is an analysis package developed by Xi'an Jiaotong University and aims at the advanced reactor R&D. In this work, a neutron-photon coupled power calculation model and a spatial-dependent reactivity feedback model were introduced. To verify the models used in SARAX, the EBR-II SHRT-45R test was simplified to an ULOF transient with an input flowrate change curve by fitting from reference. With the neutron-photon coupled power calculation model, SARAX gave close results in both power fraction and peak power prediction to the reference results. The location of the hottest assembly from SARAX and reference are the same and the relative power deviation of the hottest assembly is 2.6%. As for transient analysis, compared with experimental results and other calculated results, SARAX presents coincident results both in trend and absolute value. The minimum value of core net reactivity during the transient agreed well with the reported results, which ranged from -0.3$ to -0.35$. The results verify the models in SARAX, which are correct and able to simulate the in-core transient with reliable accuracy.

• 한국정밀공학회지
• /
• 제12권5호
• /
• pp.57-68
• /
• 1995

A general procedure for the numerical solution of coupled, nonlinear, differential two-point boundary-value problems, solutions of which are crucial to the controller design, has been developed and demonstrated. A fixed-end-points, free-terminal-time, optimal-control problem, which is derived from Pontryagin's Maximum Principle, is solved by an extension of Davidenko's method, a differential form of Newton's method, for algebraic root finding. By a discretization process like finite differences, the differential equations are converted to a nonlinear algebraic system. Davidenko's method reconverts this into a pseudo-time-dependent set of implicitly coupled ODEs suitable for solution by modern, high-performance solvers. Another important advantage of Davidenko's method related to the time-optimal problem is that the terminal time can be computed by treating this unkown as an additional variable and sup- plying the Hamiltonian at the terminal time as an additional equation. Davidenko's method uas used to produce optimal trajectories of a single-degree-of-freedom problem. This numerical method provides switching times for open-loop control, minimized terminal time and optimal input torque sequences. This numerical technique could easily be adapted to the multi-point boundary-value problems.