• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.387-392
• /
• 2003

The change of crystalline structure and mechanical properties of PET filaments were investigated. Samples were treated by isothermally annealed after elevated heating. Measurements were carried out of density gradient tube for crystallinity and UTM for initial modulus and yield stress. Isothermally heat treatment were carried out $100^{\circ}C$, $120^{\circ}C$, $140^{\circ}C$ for 10min., 30min., 60min, in silicon oil bath. And isothermally heat treatment after elevated heating from $20^{\circ}C$ were carried out $100^{\circ}C$, $120^{\circ}C$, $140^{\circ}C$ for 10min., 30min., 60min., with heating rate of $5^{\circ}C/min$., $10^{\circ}C/min$. From the results of this study, it found the following facts. It was found that the crystallinity, initial modulus and yield stress of samples were increased with increasing of annealed temperature and time. Also crystallinity, initial modulus and yield stress of samples which were isothermally annealed after elevated heating from $20^{\circ}C$ were larger than those of isohtermally annealed samples.

• Applied Science and Convergence Technology
• /
• 제27권3호
• /
• pp.47-51
• /
• 2018

We fabricated an anode-type ion beam source and studied its driving characteristics of the initial extraction of ions using two driving mechanisms: a diffusion phenomenon and a charge repulsion phenomenon. For specimen exposed to the ion beam in two methods, the surface impurity element was investigated by using X-ray photoelectron spectroscopy. Upon Ar gas injection for plasma generation the ion beam source was operated for 48 hours. We found a Fe 2p peak 5.4 at. % in the initial ions by the diffusion mechanism while no indication of Fe in the ions released in the charge repulsion mechanism. As for a long operation of 200 min, the temperature of ion beam sources was measured to increase at the rate of ${\sim}0.1^{\circ}C/min$ and kept at the initial value of $27^{\circ}C$ for driving by diffusion and charge repulsion mechanism, respectively. In this study, we confirmed that the ion beam source driven by the charge repulsion mechanism was very efficient for a long operation as proved by little electrode damage and thermal stability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.1860-1875
• /
• 2013

In this paper, we present a comparative performance evaluation of the sampling frequency synchronization method that eliminates the initial sampling frequency offset (SFO) to reduce the overall synchronization time in Digital Radio Mondiale (DRM) receivers. To satisfy the advanced synchronization performance requirements of DRM receivers, we introduce the conventional DRM synchronization method (Method 1) and another method (Method 2), which does not perform the initial sampling frequency synchronization in the conventional synchronization method (both methods are mentioned later in this paper). To demonstrate the effectiveness of the performance evaluation, analytical expressions for frame detection are derived and simulations are provided. Based on the simulations and numerical analysis, our result shows that Method 2, with a negligible performance loss, is robust to the effects of the initial sampling frequency synchronization even if SFO is present in the DRM signal. In addition, we verify that the inter-cell differential correlation used between reference cells is robust to the effect of the initial SFO.

• 융합보안논문지
• /
• 제11권3호
• /
• pp.25-30
• /
• 2011

WEP은 향후 네트워크 시장을 주도할 무선 랜에서 암호화 기능과 인증 기능을 제공하기 위하여 제시된 보안 프로토콜이다. 그러나 WEP는 암호문 생성 시 사용되는 초기 값 생성에 대한 구체적인 방법이 제시하고 있지 않으며, 초기 값의 크기 및 재사용 문제로 인하여 암호화를 하는 경우 안전성에 대한 문제가 제기되고 있다. 본 논문에서는 WEP의 취약점들을 지적하고 이에 대한 개선안을 제시하였고 제시한 개선안을 토대로 초기 값 재사용을 방지할 수 있는 초기 값 생성 시스템과 블록 암호 CBC 모드를 이용하여 기밀성과 상호 인증 기능을 제공할 수 있는 새로운 무선랜 보안 모델을 제안하였다.

• 한국전자통신학회논문지
• /
• 제18권2호
• /
• pp.241-250
• /
• 2023

본 논문에서는 적응형 초음파 빔포밍 시스템에 LMS 알고리즘을 이용하는 때에 초기치 설정이 스텝 파라미터의 여유도에 미치는 영향을 연구하였다. 이를 위하여 임의로 설정한 빔폭을 갖는 준이상 빔과 회전 빔에 대한 빔포밍에 대해서 검토하였다. 수치 실험은 초음파 빔포밍 시스템에 임의의 초기치(음원수는 임의의 수로 고정)를 설정하고, 이에 대한 스텝 파라미터의 여유도와 수렴 특성 등을 비교하였다.

• 한국전산구조공학회논문집
• /
• 제20권1호
• /
• pp.9-18
• /
• 2007

본 연구에서는 위상최적화 알고리즘의 수렴성을 개선하기 위해 설계영역에 초기 구멍을 도입하는 방법을 제시하는데, 이것은 경계면에 기초한 최적화 방법의 느린 수렴성을 완화하기 위해, Eschenauer et al.에 의해 고안된 버블 방법의 설계영역 안에 구멍을 도입하는 개념과 연계된다. 버블 방법과 달리, 제안된 방법에서는 최적화 과정동안 구멍의 위치를 정의하는 특성함수를 이용하지 않고, 최적화 초기화 단계에서만 초기 구멍을 도입하는데, 이러한 초기 설계영역 안의 솔리드와 보이드 영역들은 고정되는 것이 아니라 합쳐지거나 쪼개지면서 변화된다. 따라서 위상최적화 알고리즘에서 구멍의 이동에 관련된 복잡한 수치적인 계산 없이 자동적으로 설계변수의 유한변화를 더욱 강화시키기 때문에 목적함수 값의 수렴성을 개선할 수 있다. 본 논문에서는 다양한 치수와 형상의 구멍을 포함하는 초기 설계영역을 가지는 Michell형 보의 위상 최적설계를 밀도분포법으로 불리는 SIMP를 이용하여 수행하였다. 이를 통해 위상최적화의 수렴성을 개선하고 최적위상과 형상에 영향을 미치는 초기 구멍의 효과를 검증하였다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.347-351
• /
• 1995

We define a fuzzy regular modification and fuzzy regular series. And we investigate some properties of fuzzy regular modification with respect to fuzzy initial convergence structure

• 충청수학회지
• /
• 제27권2호
• /
• pp.173-181
• /
• 2014

In this paper, using the definition and properties of frequency measurement, we describe the properties of solutions of a difference equation as the initial value belongs to different intervals of the whole domain. We get the main result that if the initial value belongs to [-1, 1] which is different from $\frac{-1{\pm}\sqrt{5}}{2}$, then the solution defined by initial value have two frequent limits 0 and 1 of the same degree 0.5.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.335-338
• /
• 1996

In this paper, we are going to design an iterative learning controller with the robust properties for initial error. For this purpose, the PID-type learning law will be considered and the design guide-line will be presented for the selection of the learning gain. Also, we are going to suggest a condition for the convergence of control input for a plant with input delay. Several simulation results are presented, which shows the effectiveness of the proposed algorithms.

• Journal of information and communication convergence engineering
• /
• 제18권2호
• /
• pp.88-93
• /
• 2020

The IEEE 802.11p-based wireless access in vehicular environments (WAVE) [1] communication is a method used exclusively for wireless communication on the road. This technique enables information sharing not only among moving vehicles but also between vehicles and infrastructure [2]. As part of WAVE communication, data is transmitted to and from vehicles in motion; in this case, it is difficult to determine the channel accurately in an outdoor environment owing to the Doppler shift [3]. This paper proposes a new channel estimation scheme for enhancing the reception performance of the IEEE 802.11p-based WAVE system. The proposed technique obtains the initial channel value by estimating the least square in the time domain by inserting a pilot signal for channel estimation into the IEEE 802.11p virtual subcarrier. Subsequently, a least mean square algorithm is applied to the initial channel value to update the estimated channel value. The simulation results obtained using the proposed channel estimation technique confirm its remarkable efficiency.