• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.1
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.

• Weed & Turfgrass Science
• /
• v.4 no.3
• /
• pp.225-229
• /
• 2015

Echinochloa colona is one of the most problematic weeds in the paddy fields of the world. In recent years, this species is likely to be introduced in Korea due to global warming, the expansion of international trade including agricultural products, and increasing tourists. We tried to identify the species from Korean Echinochloa crus-galli and E. oryzicola in order to establish the control measures in case of the initial influx. For this study, Echinochloa colona collected from the National Plant Germplasm System, USA were examined and E. crus-galli and E. oryzicola were collected in Korea. It is, however, very difficult to identify for Echinochloa species using morphological characters because of numerous interspecific and intraspecific types found in nature. Thus, we barcoded the species using rbcL, matK, and ITS. All three markers identified E. colona very well from the others. ITS alone may be enough as a DNA barcode for E. colona identification, when considering cost and effectiveness. The barcode sequences were deposited to the National Center for Biotechnology Information database for public use.

• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.335-350
• /
• 2013

With the efforts to development of renewable energy technologies, and increasing awareness to environmental issues, the usage of wood pallets has been increasing every year since the introduction of wood pallet technology to the domestic market. until 2009, majority usage of pellet boiler was in the residential houses. In an effort to increase the distribution of wood pellet boiler to cultivation facilities with high usage of fuels, The Ministry of Agriculture and Forestry has launched a distribution project of wood pellet boiler for fuel usage as a part of the agricultural and fishery energy efficiency projects. Although only small number of farms with a heat-culturing facility have replaced from conventional boiler to pellet boiler. Although part of reason for low usage of pallet boiler is lack of understanding and information of it, the main reasons are high initial cost and uncertainty of its cost efficiency. Also, most people from agricultural industry don't realize it's significance in terms of environmental benefit due to lack of understanding in 'resource circulation' and 'adopting to climate change'. In this study, first, we did a cost-efficiency analysis of the farm which uses a diesel boiler to grow cucumber, tomato, paprika. Then we replaced the diesel boiler to a pallet boiler and measured its cost-efficiency again. By comparing the cost-efficiency of the diesel boiler with the pellet boiler, we analyzed the economic viability of pellet boiler. Then we analyzed viability of pallet boiler usage in terms of 'resource circulation' and 'adopting to climate change'. As a result of our analysis, we have found out that under the current system of government support, the energy usage varies depends of the types crops grown and the higher the energy use, the more cost efficient it is to use the pallet boiler. Also, it is economically viable to use the pallet boiler in terms of 'resource circulation' and 'adopting to climate change'.

• Communications of Mathematical Education
• /
• v.26 no.3
• /
• pp.273-299
• /
• 2012

The purpose of this study is to investigate how constructed-response assessments are currently defined and used to find an alternative way of developing well-defined constructed-response questions and an assessment system. Based on our review of the literature, we analyze constructed-response assessments developed and used in Gyeonggi-do, South Korea and Ohio, U.S.A. in terms of their definitions, types of questions, information and guidelines given by the government agencies in each place, and scoring rubrics and their use. The results provide meaningful implications for the development of constructed-response assessments in the future.

• Journal of the Korean association of regional geographers
• /
• v.19 no.4
• /
• pp.737-746
• /
• 2013

This study was carried out to suggest plan of earth surface erosion by typifying landforms in Gwangeung Forest. Elements of landform were classifyed as hierachical system by scale. Scale for classification set a decision as four categories. We could classify landforms which level zero is 4 levels of elements, level one is 6, level two is twelve, level three is twenty seven. However, micro landforms of valley bottom which is hard to mapping made a categorization as upper valley, middle valley, artificial channel valley. Plan for soil erosion suggested yarding corridor, landform management for surroundings of slope and bridge using rock and gravel, road construction for forest management stable bedrock rather than soil layer, repose angles and piling up rocks for channel walls, and setting up buffer zone when forest thinning be carried out. The result of this research will be expected to provide information for forest management of mountainous areas by landform types.

• Journal of Internet Computing and Services
• /
• v.14 no.3
• /
• pp.23-33
• /
• 2013

Recently in the field of IT, cloud computing technology has been deployed rapidly in the current society because of its flexibility, efficiency and cost savings features. However, cloud computing system has a big problem of vulnerability in security. In order to solve the vulnerability of cloud computing systems security in this study, impact types of virtual machine about the vulnerability were determined and the priorities were determined according to the risk evaluation of virtual machine's vulnerability. For analyzing the vulnerability, risk measurement standards about the vulnerability were defined based on CVSS2.0, which is an open frame work; and the risk measurement was systematized by scoring for relevant vulnerabilities. Vulnerability risk standards are considered to suggest fundamental characteristics of vulnerability and to provide the degree of risks and consequently to be applicable to technical guides to minimize the vulnerability. Additionally, suggested risk standard of vulnerability is meaningful as the study content itself and could be used in technology policy project which is to be conducted in the future.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.192-203
• /
• 2012

As a leading nation of ubiquitous technology, South Korea has been promoting u-City pilot projects throughout the country. According to 'Fundamental Construction Law of u-City,' u-City projects are classified into old-town and new-town types. However, most projects have focused only on the new-town type. Pushing forward large-scale land development projects, Korea Land and Housing Corporation (LH Co.) under Ministry of Land Transport and Maritime Affairs (MLTM) has gained a development profit out of the u-City infrastructure and then donated the infrastructure to a local government without making any plan for operations. In the process of u-City pilot projects, old-towns have been relatively ignored and various of unexpected problems have emerged. Building the u-City of an old-town is not easy due to many constraints such as huge initial investment, long validity and verification procedures, lack of useful services for citizens, lack of professional outsourcing methods for business promotion, high operating costs of the integrated control center, inadequate law related, insufficient institutional requirements and so on. This paper introduces a case study on u-City development for an old-town, Ansan City, as a private investment project. The case will help boost u-City projects for old-towns by solving their problems and providing an effective operational mechanism. As the first BTL (Build-Transfer-Lease) project for constructing u-City, 'Broadband Information Network Development Project' of Ansan City will provide a reference model of expanding u-City projects for other cities.

• Journal of KIISE
• /
• v.42 no.2
• /
• pp.177-182
• /
• 2015

The era of multi-core processors has begun since the limit of the clock speed has been reached. These days, multi-core technology is used not only in desktops, servers, and table PCs, but also in smartphones. In this architecture, there is always interference between processes, because of the sharing of system resources. To address this problem, cache partitioning is used, which can be roughly divided into two types: software and hardware cache partitioning. When it comes to dynamic cache partitioning, hardware cache partitioning is superior to software cache partitioning, because it needs no page copy. In this paper, we compare the effectiveness of hardware and software cache partitioning on the AMD Opteron 6282 SE, which is the only commodity processor providing hardware cache partitioning, to see whether this technique can be effectively deployed in dynamic environments.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.881-892
• /
• 2016

Following the Fukushima accident and its extended station blackout, attention was brought to the importance of the spent fuel pools' (SFPs) behavior in case of a prolonged loss of the cooling system. Since then, many analytical works have been performed to estimate the timing of hypothetical fuel uncovery for various SFP types. Experimentally, however, little was done to investigate issues related to the formation of a flammable gas mixture, distribution, and stratification in the SFP building itself and to some extent assess the capability for the code to correctly predict it. This paper presents the main outcomes of the Experiments on Spent Fuel Pool (ESFP) project carried out under the auspices of Swissnuclear (Framework 2012-2013) in the PANDA facility at the Paul Scherrer Institut in Switzerland. It consists of an experimental investigation focused on hydrogen concentration build-up into a SFP building during a predefined scaled scenario for different venting positions. Tests follow a two-phase scenario. Initially steam is released to mimic the boiling of the pool followed by a helium/steam mixture release to simulate the deterioration of the oxidizing spent fuel. Results shows that while the SFP building would mainly be inerted by the presence of a high concentration of steam, the volume located below the level of the pool in adjacent rooms would maintain a high air content. The interface of the two-gas mixture presents the highest risk of flammability. Additionally, it was observed that the gas mixture could become stagnant leading locally to high hydrogen concentration while steam condenses. Overall, the experiments provide relevant information for the potentially hazardous gas distribution formed in the SFP building and hints on accident management and on eventual retrofitting measures to be implemented in the SFP building.

• Quality Improvement in Health Care
• /
• v.15 no.2
• /
• pp.107-120
• /
• 2009

Background : To estimate fall incidence rate and associated factors in inpatients from a general hospital. Method : The data were collected from 104 fall incident reports developed by the patient safety committee in a general hospital in Seoul from 01 January 2007 to 31 December 2008. Information included general characteristics of patients, factors related to fall, types, places, circumstances and outcomes of fall. Result : The incidence rate of fall, which was 4.4 per 1,000 total discharged patients and 0.5 per 1,000 patient-days, was much lower than that of several hospitals in the United States. The difference may reflect the different incidence reporting system of each hospital. Fall-prone patients were, in general, $$\geq_-$$65 years of age, had an alert mental status, were ambulatory with some assistance, and were dependent on and ambulatory device. High incidence of falls was associated with patients with circulatory disease. The majority of fall events usually occurred in bed or at the bedside in the patient's room, and occurred more often during the night than during the day or evening. Risk factors of fall were use of drugs (antihypertensive or neuropsychiatric drugs) and environmental factors (e.g., overly high bed height, surrounding objects, inadequate fitness shoes and slippery floor). Physical injury occurred in 43.3% of fall events, which typically required diagnosis of injury and treatment such as suturing. Risk factors for repeated falls were use of a neuropsychiatric drug (odds ratio=13.9) and gait disturbance (odds ratio=91.2). Risk factors for fall-related injury were alert mental status (odds ratio=3.3 times more likely to fall than those who were drowsy or in a stupor) and general weakness(odds ratio=3.3 times more likely to fall than those who were not generally weak). Conclusion : Medical and nursing staff should be aware of the fall risk factors of hospitalized patients and should intensively pursue preventative strategies. Development of fall prevention education based on these results is recommended.