• Industry Promotion Research
• /
• v.2 no.1
• /
• pp.45-50
• /
• 2017

This study analyzed the effect of on - the - job training of workers in Chungnam western area on productivity improvement. A total of 76 questionnaires were analyzed for workers in the western part of Chungcheongnam-do that completed the training course of the Korea Polytechnic University Education and Labor Ministry. The results of this study are as follows: First, the higher the motivation to receive the on - the - job training for the improvement of the productivity, the higher the satisfaction of the training of the worker, but the effect on the job productivity was not significant. Second, the correlation between training experience and job productivity was not statistically significant. Third, as for the effect on the productivity improvement according to the rank, the temporary workers showed higher education satisfaction than the regular workers (agency), and the job productivity was higher than the manager (manager level). Results of ANOVA analysis showed that there was a significant effect on educational satisfaction and job satisfaction according to years of work, career, and rank. The purpose of this study is to analyze the effects of on - the - job training of workers in the western part of Chungnam, on the productivity improvement, The validity of the study is significant.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.483-490
• /
• 2016

In plant industry, sulfur storage tank is made of steel and annular plate is connected with concrete foundation of ring wall type by anchor bolt. Due to keep sulfur at high temperature in tank by coil, sulfur storage tank is expanded larger than another tank stores fluid at room temperature. Generally, structural design of tank foundation is performed analysis with loading of temperature gradient between inner and outer surface, this method can't consider the phenomenon that load is intensively transferred to concrete foundation at anchor bolt. This means that temperature load is underestimated and causes crack of concrete near anchor bolt. In this study, evaluation formula considering temperature load transfer mechanism through anchor bolt is proposed and load acting on concrete foundation is rationally decided. For this purpose, it is analyzed variation of thermal load per various anchor bolt number using finite element model including tank annular plate and anchor bolt. Solution is proposed as specified term combining result of analysis and theoretical solution for evaluating load transferred by anchor bolt. For confirmation of validation of proposed formula, it is applied in design of sulfur storage tank at plant site, it shows that the formula can be practically applied.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.1-27
• /
• 2012

As more manufacturing and global businesses are being pulled into the port area, the idea of a Port Business Valley (PBV) is being pondered as it would create jobs and added value. The PBV would be centered around the harbor and be connected to the port, a logistics district, an industrial district, and the city. The resulting domestic and foreign investment in logistics, industry, business, tourism, living, etc. would vitalize the geographical characteristics of Incheon Port. It would also generate the largest amount of ripple effects between industries in the PBV. However, up until recently, the most frequently offered examples of planning that have helped logistics of a port to grow that have used a PBV have been those of Busan New Port and Gwangyang Port. However, this study is the result of the recent inception of the idea of creating a PBV centered around Incheon Port and the need for experts to develop a plan for such a PBV in Incheon by conducting a site specific study. The aim of this study is to set up the concept of PBV and establish PBV model of Incheon Port. In addition, this study identifies construct factors and their strategies for establish PBV of Incheon Port and then, shows the key factors and related-strategies on Fuzzy-AHP analysis from a survey of logistics experts with Incheon Port.

• Korean journal of applied entomology
• /
• v.52 no.3
• /
• pp.243-248
• /
• 2013

This study was conducted to understand the settlement process of Ascotis selenaria larvae into citrus orchards with respect to oviposition site and analysis of the spatial distribution pattern of the larvae. A. selenaria eggs were not found on citrus trees in field and green house, but not on citrus trees in the field. A. selenaria larvae showed a significant clump distribution in the greenhouse. In the open citrus field, the index of dispersion was around 1.0 in most cases, with a weak clumping degree. However, the d-statistic was between -1.96 and 1.96, indicating a statistically significant random distribution. In addition, the Green's index (a clumping index) was very low in all cases, even though the clump distribution was accepted. for most samples, the probability distribution of larval frequency in the field satisfied the probability distribution functions of Poisson (random pattern) and the negative binomial (clump pattern) distribution. In addition, the temporal distribution of the larvae in the open field showed a pattern which was formed by colonizers from outside oviposition sites. Further, the difference in larval spatial distribution between field and greenhouse orchards was discussed.

• Journal of Korean Society of Forest Science
• /
• v.57 no.1
• /
• pp.20-25
• /
• 1982

This study was carried out to investigate the changes of forest land use around Tae Kwan Ryoung region during 15 years, by using the aerial photographs in 1965 and 1980 respectively. the results are summarized as follows: 1) The areas of forest land and farm land has been decreased, while the grass land increased as 3 times. It is because that the site of Tae Kwan ryoung region was suitable for livestock breeding and the wide grass lands were developed. 2) With a view to forest land use, it is desirable to convert the forest land into grass land and farm Land. But it should be considered the fact that most of the farm land was converted into forest land, in the utilization of forest land in future. 3) Due to the development of industries such as livestock breeding and leisure industry, there is a great increase in the dwelling houses, stalls, public building and habitants in this region. Therefore, in future we should establish the plans of forest land use synthetically and efficiently, considering the promotion of indirect utilities such as soil conservation, recreation and environmental protection as well as timber production.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.11-20
• /
• 2010

With the amendment to the Building Act in November of 2005 that offered incentives in terms of floor area ratio and number of stories to apartment buildings adopting the Rahmen structure to facilitate remodeling, the construction industry is paying more attention to PC structures. As connections between PC columns and beams require complex design, it is very difficult to install and remove forms. Since forms made of plywood for such connections are fabricated and installed on site, a significant amount of labor is required, and constructability is low. Furthermore, after concrete casting, the forms are removed in a state in which they cannot be recycled, which leads to a significant amount of construction waste. For this reason, a solution to address such issues needs to be studied. However, many researchers have focused only on the structural performance of PC structures in Korea and elsewhere, ignoring the need for research on the forms used in building PC structure connections. Therefore, this research aims to develop a form that can improve the productivity of PC structure connection construction, and compare it with conventional forms to highlight its contribution to gains in productivity and economic viability.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.101-109
• /
• 2009

This CW(Construction wastes) are increasing as construction industry is growing, so many countries make efforts to recycle CW. Korea also made a stipulation for recycling CW. But the main content of this stipulation is for using recycled aggregates. Advanced countries try to increase reuse rate of not only recycled aggregate but also other kinds of wastes. So they are adopting SDM(separating dismantlement) method and we are also planning to make the system for SDM. This study is about SDM analysis through construction field investigation and difference analysis between SDM and UDM comparing predictive amount by UDM with real generated amount by SDM. First, the generated amount of construction wastes by SDM is more than estimated amount by UDM, and mixed waste was specially reduced more than UDM. The warehouse is easier than the office building to applicate SDM. But still there is no manual for SDM in the site, so establishment of SDM is demanded.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.1
• /
• pp.19-25
• /
• 2014

The purpose of this study is to establish experimentally the mechanical properties of fiber reinforced concrete using kenaf dosages and propose the usable method of kenaf fiber in the concrete industry as natural fiber materials. Kenaf fiber help make the concrete strength including tensile and flexural stronger, more resistant to plastic and drying shrinkage, less amount of carbon dioxide because of having a rough surface and excellent tensile strength of fiber and improving the concrete's corrosion resistance. It is to select the kenaf dosages of 4 cases (0, 0.3, 0.6 and $0.9kg/m^3$ and perform various tests including slump, air content, plastic and drying shrinkage, flexural and tensile strength for fiber reinforced concrete. The results of this study are as follows : In case of increasing kenaf fiber dosages, show the slump decrease and air content increase, also take effect results for increasing concrete strength including flexural and tensile, decreasing plastic and drying shrinkage. therefore, considered test results and cost, the optimum dosages of kenaf fiber is proposed about $0.6kg/m^3$ and need to study on the site application considering concrete quality and another compared tests.

• Journal of Applied Biological Chemistry
• /
• v.60 no.3
• /
• pp.271-277
• /
• 2017

Ethyl formate has been used for the control of insect pests by fumigation. However, there were not many reports to show its target site of fumigant toxicity on insect pests since its first use in the agricultural industry. In the present study, we showed the presumable target sites of ethyl formate fumigation in insect pests using Myzus persicae nymphs. After ethyl formate fumigation, the nymphs of this species were collected and the changes at the biochemical and molecular level were determined. The activity of cytochrome c oxidase (COX) was approximately two-fold higher after ethyl formate fumigation. In addition, the expression levels of acetylcholinesterase (AChE) decreased gradually with increasing ethyl formate concentration. These two findings suggested that COX and AChE might be the major target sites of ethyl formate fumigation. In addition to these results, the analysis of lipid content using MALDI-TOF MS/MS identified 9 phospholipids differently generated 2-fold higher in the ethyl formate-treated nymphs than that in the control nymphs, thereby leading to changes in cell membrane composition in M. persicae nymphs. Therefore, the ethyl formate fumigation caused lethal effects on M. persicae nymphs by changing COX activity, AChE gene expression, and phospholipid production.

• Journal of the Korean association of regional geographers
• /
• v.19 no.4
• /
• pp.641-653
• /
• 2013

This study analyzed the location of manufacturing industries and works' residence in Yangsan city of which large part of industries were relocated from Busan metropolitan area along the industrial suburbanization process. Through the field survey, in-depth interview, and analysis of statistical data, the study tried to describe the relocation characteristics of manufacturing industries in Yangsan city. The results of the analysis are as follows: 1. The relocation rate of manufacturing industries from Busan to Yangsan was very high in 1980s. As a result of analysis, the first prime factor on relocation was the site problem for industrial land use. But for the newly starting industries, the most important factor was the subcontract networks among industries which differed from relocated ones. 2. The industrial suburbanization process influenced on the industrial structure strongly, as the compositional weight of rubber and plastic industries in Yangsan became greater and the size of the major plants got larger. 3. The manufacturing industries in Yangsan city were widely distributed on the main national industrial districts. Also, they were diffused out to the other places beyond the boundary of industrial districts. 4. The commuting workers' residence in Busan, employed by the plants of Yangsan marked 44.5%. That confirmed the strong influence of Busan labor market.