• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.5
• /
• pp.30-36
• /
• 2001

Caro's acid (persulphuric acid) has been proposed as a promising reagent used in pulping of lignocellu-losic materials. Bagass was subjected to caro's acid pulping under different pulping conditions of per acid concentration (2~8 percent), pulping temperatures (40~$60^{\circ}C$) and pulping time (120~240 min). The influence of different parameters of caro's acid pulping process on the chemical and strength properties of the produced pulps had been studied. Peracid concentration and pulping temperature are the most important variables of the pulping process. High degree of delignification and good deliberation were achieved at moderate pulping conditions in the studied range. Pulping experiments of bagasse by using caro's acid had been carried out for determination of the optimum comditions of the process. In inch case to effectively tackle the problem, a specific design of an experiment is selected depending on the goals to be achieved in the experimentation. The study could enable us to excepect the bagasse pulp properties (yield, Kappa number, DP) that be stated as function of the independent variables of caro's acid pulping process (per acid concentration, pulping temperature and pulping time).

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.285-290
• /
• 2006

As an alternative method to solve air pollution problem and difficulty of pulp bleaching of kraft pulping process, NaOH-Urea pulping was applied. The properties of NaOH-Urea pulp were compared to those of NaOH and kraft pulps. Addition of urea in low alkali charges retarded delignification rate compared to NaOH pulping. But, in high alkali application, delignification was significantly enhanced not from the addition of urea but from the high alkalinity. It was disclosed that urea did not participate on delignification reaction by the experiment using lignin model compound. Compared to paper strengths at the same level of sheet density, NaOH-Urea pulp gave as almost same breaking length and tensile index as those of kraft pulp. Especially tensile energy absorption and burst index were higher than those of kraft pulp.

• Journal of Fashion Business
• /
• v.19 no.5
• /
• pp.188-198
• /
• 2015

This study analyzed the qualifications necessary and manpower required in the Jeju nail art and make-up industry. We aimed to investigate the relationship between NCS education and national technical qualifications. For this study, 164 participants were given a questionnaire, and the collected data were analyzed via frequency analysis and multiple regression analysis using SPSS Ver. 18.0. The results of this study are as follows: 1. Matching job seekers with available positions was more difficult in nail art businesses than in makeup businesses. The main routes by which practitioners found jobs were Internet job sites and acquaintances. In addition, experience was the first consideration in hiring employees. 2. Those in high positions had less intention of employing students who had received NCS education, than those in lower positions. Intention to employ NCS graduates was high in businesses that found their employees through Internet job sites, vocational training institutes, acquaintances, or colleagues. Nail art workers prioritized NCS educational units in the following order: nail care, nail shop hygiene, gel nails, cosmetic nail removal, and tips/wraps. Makeup workers had the following priorities: basic makeup, wedding makeup, makeup shop safety, and hygiene management. They also mentioned basic occupational skills such as communication skills, interpersonal skills, and problem solving skills. Moreover, the new national licensing system was found to reflect competency in the most important skill sets.

• Journal of National Security and Military Science
• /
• s.5
• /
• pp.241-280
• /
• 2007

This study examines the relationship of the industry-specific factors that effect innovation of manufacturing technology and the market share within the defense industry. Since the establishment of the basic defense industry framework in 1973, there were numerous interactions of the industry-specific factors of the defense industry structure with the technological innovation and market organization of the defense industry. During last three decades, the domestic defense industry has achieved the considerable level but the framework of the basic system has not developed much in areas of the military science and the defense manufacturing technology. Industry-specific factors were formed in the process and appeared in a variety of behavioral characteristics as subsystems. Currently, there IS a growing trend where the management of defense industry is gradually deteriorating due to limitation of the domestic industry-specific factor (e.g. defense technologies, amount of demand, etc.). If there is a prominent imbalance of the industry-specific factors. it can trigger the potential problem of conflict, lack of cooperation and control, slowing the growth of the manufacturing technology thereby diminishing the market and deteriorating the defense supply/demand relationship. In a research conducted by Joe S. Bain, Bain analyzed the relationship of the traditional industrial organization where industry-specific factor(S) not only impacts the conductor(C). And, conductor(C) influences the shaping of the performance(P) of relationship of the traditional industrial organization. Consequently, the researcher has identified the demand monopoly, barriers to entry, and market competition with comparison of defense industry issues. These defense issues were three industry-specific factors identified, which are 1) The demand monopoly and The entry barriers to new market competition, 2) the industrial technical factor to a production technical competitiveness and a market sharing competitiveness, 3) the probability factor to revolution for military affairs(RMA) and a R&D production. According to baseline with these factors, the following research model is established from the special companies group(Group A), the systematization companies group(Group B), and the general companies group(Group 0. The hypothesis is that if there are more industry-specific factors, then there will be more relationships of defense industry relation statutes. This research is an empirical study on the relationship that the industry specific factors effects the innovation of manufacturing technology and the shaping of the market in the defense industry. Moreover, the existing models to evaluate the industry specific factors of the defense industry IS much to be desired with the controlled statistical analysis of the result. It is vital to study on current situation with suggesting alternative strategy to the efficient strategy. The descriptive analysis approach analysis is conducted with SPSSWIN to conduct reliability test, factor analysis, correlation analysis, cross-tabulation analysis, one-way ANOVA, and multiple regression analysis. However, there were some limitations of the survey such as the rigidity of concept about the technical factors and various market management factors. The wishes is that the decision-maker could be utilized these defence industrial factors to formulate efficient defence policy and strategy in the future.

• Journal of Korean Institute of Industrial Engineers
• /
• v.36 no.1
• /
• pp.22-31
• /
• 2010

In R&D project evaluation, we consider the technical couple. And we set technology modular alternatives, after evaluating technical group based on technical couple. So we solve the problem extracted from existing research of R&D project evaluation. We use Conjoint Analysis(CA) for this research. CA is usually used for confirming customers' preference. However we use it for researchers' preference in the side of technology. This research is followed by the next 4 steps. (1) Hierarchical model of goal technology (2) Composition model of modular alternatives (3) Evaluation model of modular alternatives (4) Setting model of technology modular alternatives.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.145-153
• /
• 2010

With the recent acceleration in the adoption of IT in industries, converged Construction-IT has been drawing attention as a new market driver in the IT fusion industry. Despite the simultaneous implementation of U-Cities all over Korea in a manner suiting each city's own attributes, Technical Criteria to build an optimized IT-infrastructure have not yet been prepared. To solve this problem, a standard for U-City construction should be prepared. This research, therefore, draw sample contents in order to establish and verify the criteria for U-City construction. The findings are expected to be meaningful, in that they would serve as significant data for establishing the criteria for future U-City construction.

• The Journal of Society for e-Business Studies
• /
• v.2 no.2
• /
• pp.115-135
• /
• 1997

In this paper, we discuss CITIS(Contractor Integrated Technical Information Service) as the information infrastructure of CALS. CITIS is a contractor-developed and maintained service to provide electronic access and/or delivery of Government-procured contractually required information. As the concept of CALS is expanded government acquisition process into industry business, the CITIS is also expanded military CITIS into commercial CITIS. First, we describe CITIS services and functions defined by MIL-STD-974, and then specify the difference of military CITIS and commercial CITIS. The problem of current CITIS for inter-operable business process is indicated, and legal issues for sharing of CITIS data are also discussed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.1
• /
• pp.7-19
• /
• 1999

This paper discusses the threatening problem of Year 2000 (Y2K) to the banking industry. Of all steps to prepare for this big challenge, the clear understanding of the problem is always first to cope with the corning crisis. We categorize the possible issues into nine facets: (1) Potential Systemic Issues; (2) Technology Problems; (3) Technical Resources; (4) Vendor Management: (5) Supervisory Coordination and Security Issues; (6) Spillover Business Risks; (7) Operational Problems; (8) Euro Problem; and (9) Face Closure or Loss of Federal Deposit Insurance. We believe that each or these nine issues must be dearly recognized and appropriately prepared by those bankers who want to avoid the disaster they have never experienced.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.143-149
• /
• 2024

The production and procurement of shipbuilding and offshore equipment is an important competitive factor in the shipbuilding and offshore industry. Recently, ICT-based digital technology has been rapidly applied to the manufacturing industry following the Fourth Industrial Revolution. Under the digital transformation, real-time data interface technology based on SCM (Supply Chain Management) is emerging as an important tool to improve the efficiency of the equipment manufacturing process. In this study, the characteristics and advantages and disadvantages of interface technologies of web-based data interface technologies were compared and analyzed. The performance was compared between theoretical evaluation based on technical features and practical application cases. As a result, it was confirmed that GraphQL is useful for selective data processing, but there is a problem with optimization, and REST API has a problem with receiving data due to a fixed data structure. Therefore, this study aims to suggest ways to utilize and optimize these data interface technologies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.2126-2133
• /
• 2009

As expected that a robot-industry will grow up rapidly toward a huge market, many countries try to develop the official policies to support a robot-industry. Following this trend, many robot researches are proceeded in the various technical areas by the government-initiated R&D strategies in Korea. These R&D programs are archived by academic-industrial collaboration and furthermore, include the disseminated linkage of academic-industrial collaboration and the human resource development program which pursues the problem solving and technical training for companies suffered by several technical difficulties. This paper shows the several analyses and considerations of provisional results of these collaboration programs. First, each program of specialized plan for next generation is reviewed and the accomplishment of human resource development for robot research is evaluated. Finally, several considerations are represented for continuous and desirable expansion of these programs.