• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.390-391
• /
• 2005

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.5
• /
• pp.227-234
• /
• 2018

The smart irrigation system using ICT technology is crucial for stable production of upland crops. The objective of this study was to develop a smart irrigation system that can control soil water, depending on irrigation methods, in order to improve crop production. In surface irrigation, three irrigation methods (sprinkler irrigation (SI), surface drip irrigation (SDI), and fountain irrigation (FI)) were installed on a crop field. The soil water contents were measured at 10, 20, 30, and 40 cm depth, and an automatic irrigation system controls a valve to maintain the soil water content at 10 cm to be 30%. In subsurface drip irrigation (SSDI), the drip lines were installed at a depth of 20 cm. Controlled drainage system (CDS) was managed with two ground water level (30 cm and 60 cm). The seasonal irrigation amounts were 96.4 ton/10a (SDI), 119.5 ton/10a (FI), and 113 ton/10a (SI), respectively. Since SDI system supplied water near the root zone of plants, the water was saved by 23.9% and 17.3%, compared with FI and SI, respectively. In SSDI, the mean soil water content was 38.8%, which was 10.8% higher than the value at the control treatment. In CDS, the water contents were greatly affected by the ground water level; the water contents at the surface zone with 30 cm ground water level was 9.4% higher than the values with 60 cm ground water level. In conclusion, this smart irrigation system can reduce production costs of upland crops.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.1
• /
• pp.15-20
• /
• 1993

This study describes ultrasonic reflection at a water/fiber reinforced polymer composite/water interface. Theoretical predictions of reflected beam amplitudes are also presented. Four different polymer composite laminates are investigated : T300/5208 graphite/epoxy $[0]_{31T},\;[45/90/-45/0]_{3S},\;[45/-45]_{2S}$, and S-2 glass/epoxy $[0/90]_{4S}$. The analytical leaky plate wave dispersion curves for the unidirectional laminate and other three laminates can be obtained by searching for the minimum magnitude of the reflection coefficient.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.1
• /
• pp.153-162
• /
• 2023

It is important to determine water movement at the growing substrate used in soil-less cultivation for better management of water supply. Numerical simulation is a fast and versatile approach to evaluate highly accurate water distribution. The objective of this study is to simulate the water movement in rockwool as a soil-less medium using HYDRUS-2D. HYDRUS-2D was used to simulate the spatial and temporal water movement in two types of rockwool slabs (Floriculture (FL), high density; Expert (EP), low density). The simulation was performed at two pulse conditions: 10 min ON and 50 min OFF (case A), 20 min ON and 40 min OFF (case B). The total irrigation amounts were the same at both cases. In case A, during the irrigation ON, the water contents at FL increased 1.93-fold faster than the values at EP. Whereas, during the irrigation OFF, the decreasing rate of water contents at FL was almost the same as one at EP. At case B, these values were not changed much from case A. However, the duration of optimum water content (50% - 80%) was 15.0 min and 23.5 min at case A and case B, respectively. Thus, FL and 20 min ON and 40 min OFF (case B) could supply water to rockwool much faster and longer than EP. Once qualitatively validated, this simulation of water movement in rockwool could be used to design an effective optimum irrigation method for vegetables.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.57-58
• /
• 2005

• Journal of Industrial Technology
• /
• v.31 no.A
• /
• pp.135-145
• /
• 2011

This study was conducted to analyze the cost effectiveness in line with total phosphorus standard enforcement of public sewage treatment facilities. The additional cost for the total phosphorus removal process was calculated to analyze the cost effectiveness of the advanced water purification process. The analysis results showed that the T-P removal by coagulation sedimentation was more efficient than the advanced water purification facilities in terms of facilities investment cost, and if the coagulation filteration was used for T-P removal, the activated carbon process among the advanced water purification techniques was more efficient in terms of facilities investment cost. In this study, the effects of the T-P removal process that will be additionally introduced according to the tightening of the effluent T-P standard were analyzed within a limit. The actual benefits of improved T-P concentration in the water source will provide diverse values, including the leisure water, environment improvement water, eco-system in the water source and industrial water, in addition to the advanced water purification.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.715-721
• /
• 1997

W/O/W multiple emulsions were prepared comprising $MgSO_4$ in the inner aqueous phase as a model drug. The stability and drug release behavior of the multiple emulsions were studied using optical microscopy, viscometry and conductometry. Glucose was introduced in the outer aqueous phase to reduce the osmotic pressure gradient across the oil layer arising from the localization of drug molecules in the inner water phase. It was found that the presence of glucose was effective in stabilization of the multiple emulsions and in control of the release rate of drug more evidently when oil phase was partially hydrophilized with cetostearyl alcohol. This may be attributed to the fact that the migration of water accompanying the hydrophilic surfactant to the inner water phase was limited under a reduced osmotic pressure gradient and thereby slow down the destabilization of the oil/inner water interface.

• Environmental and Resource Economics Review
• /
• v.15 no.5
• /
• pp.961-974
• /
• 2006

This paper estimates output and price elasticities of the industrial water in order to provide the government with tools that help make educated decisions with regard with the water provision policies rendering the latter more efficient. The estimated output elasticity produces useful insights on the role of industrial water as an input into the production process while the estimate of price elasticity enablesus to forecast the effects of various water pricing policies. This paper employs the marginal productivity method in order to estimate the abovementioned elasticities. The magnitude of the estimated output elasticity imply that the value of industrial water is much higher than its average price while the price elasticity estimate suggests that the water pricing policy can be an effective tool of controlling the demand for industrial water.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.631-636
• /
• 2009

This study has its intention to investigate the water quality of non-point source which is runoff from roads. We have classified and selected twelve sites as city road, industrial road, national road and mountain road by considering their traffic volume and surroundings. Water quality was analyzed based on BOD, COD, SS, T-N and T-P and the concentrations were measured by sampling after rainfall with the interval of 10 minutes, 20 minutes, and 30 minutes. BOD was the highest in city road with 57.6 mg/L and the lowest in mountain road with 45.0 mg/L. For COD, the highest concentration in industrial road was 146.5 mg/L and the lowest was in mountain road with 98.0 mg/L. The run off concentration of SS was up to maximum 630.0 mg/L (average 280.4 mg/L) which was remarkable compared to other types of road. It showed its lowest concentration in national road with 76.0 mg/L. T-N and T-P were the highest in industrial road and the lowest in mountain road. We found out that the runoff concentration was high with large amount of traffic volume and it seemed to be high in city road and industrial road where they were largely affected by their surroundings. Relatively, national road and mountain road seemed to show low concentration as they have less traffic volume and less affected by their surroundings.

• IE interfaces
• /
• v.19 no.2
• /
• pp.106-116
• /
• 2006

In this study, the priority of risk factors in supplying water through water supply pipeline network was evaluated by PROMETHEE and ANP multi-criteria decision analysis. We chose 'corrosion', 'burst' and 'water pollution' in pipe as major reference criteria and selected eight risk factors to evaluate the priority, and then we compared the results of PROMETHEE with those of ANP. We also analyzed the results of the sensitivity analysis by changing the weights and parameters of preference functions in PROMETHEE. We investigated the possibility of integrating two methods by using the results of ANP as the weights of preference function in PROMETHEE. The priority of risk factors for supplying municipal water which is evaluated by this study may provide basic data to establish a contingency plan for accidents, or to establish the specific emergency response procedures.