• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.1-5
• /
• 2008

ZnS is an attractive material for future optical and electrical devices since it has a direct and wide band gap to provide blue emission at room temperature. In this study, inductively coupled $BCl_3/Ar$ plasma was used to etch ZnS:Mn thin films. The maximum etch rate of 164.2 nm/min for ZnS:Mn was obtained at a $BCl_3(20)/Ar(80)$ gas mixing ratio, an rf power of 700 W, a dc bias voltage of -200V, a total gas flow of 20 sccm, and a chamber pressure of 1Pa. The etch behaviors of ZnS:Mn thin films under various plasma parameters showed that the ZnS:Mn were effectively removed by the chemically assisted physical etching mechanism. The surface reaction of the ZnS:Mn thin films was investigated by X-ray photoelectron spectroscopy. The XPS analysis revealed that Mn had detected on the surface ZnS:Mn etched in $BCl_3/Ar$ plasma.

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.727-732
• /
• 2008

In this work, the etch characteristics of $VO_2$ thin films were investigated using inductively coupled plasma (ICP) of $Cl_2/Ar$ gas mixtures. To analyze the plasma characteristics, a quadrupole mass spectrometer (QMS), an optical emission spectroscopy (OES), and a Langmuir probe measuring system were used. The surface reaction of the $VO_2$ thin films was investigated using X-ray photoelectron spectroscopy (XPS). It was found that an increase in Ar fraction in the $Cl_2/Ar$ plasma at fixed gas pressure, input power, and bias power resulted in increasing $VO_2$ etch rate which reached a maximum value of 87.6 nm/min at 70-75 % Ar. It was confirmed that the etch rate of the $VO_2$ films was mainly controlled by the ion flux. On the basis of measuring results, we will discuss possible etching mechanism of $VO_2$ film in the $Cl_2/Ar$ plasma.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.7-11
• /
• 2002

In this study, Au thin films were etched with a $Cl_2/Ar$ gas combination in an in an inductively coupled plasma. The etch properties were measured for different gas mixing ratios of $Cl_2/(Cl_2+Ar)$ while the other process conditions were fixed at rf power (700 W), dc bias voltage (150 V), and chamber pressure (15 mTorr). The highest etch rate of the Au thin film was 3500 $\AA/min$ and the selectivity of Au to $SiO_2$ was 4.38 at a $Cl_2/(Cl_2+Ar)$ gas mixing ratio of 0.2. The surface reaction of the etched Au thin films was investigated using x-ray photoelectron spectroscopy (XPS) analysis. There is Au-Cl bonding by chemical reaction between Cl and Au. During the etching of Au thin films in $Cl_2/Ar$ plasma, Au-Cl bond is formed, and these products can be removed by the physical bombardment of Ar ions. In addition, Optical emission spectroscopy (OES) were investigated to analyze radical density of Cl and Ar in plasma. The profile of etched Au investigated with scanning electron microscopy (SEM).

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.804-808
• /
• 1998

The inductively coupled plasma(ICP) etching of platinum with BCl$_3$/Cl$_2$ gas chemistry has been studied. X-ray photoelectron spectroscopy (XPS) was used to investigate the chemical binding states of the etched surface. The plasma characteristics was extracted from optical emission spectroscopy (OES) and a single Langmuir probe. In this case of Pt etching using BCl$_3$/Cl$_2$ gas chemistries, the result of OES and Langmuir probe showed the increase of Cl radicals and ion current densities in the plasmas with increasing Cl$_2$ gas ratio. At the same time, XPS results indicated that the intensities of Pt 4f decreased with increasing Cl$_2$ gas ratio. The decrease of Pt 4f intensities implies the increase of residue layer thickness on the etched Pt surface.

• 한국전기전자재료학회논문지
• /
• 제16권4호
• /
• pp.298-303
• /
• 2003

Bi$_4$-$_{x}$EU$_{x}$Ti$_3$O$_{12}$ (BET) thin films were etched by inductively coupled CF$_4$/Ar plasma. We obtained the maximum etch rate of 78 nm/min at the gas mixing ratio of CF$_4$(10%)/Ar(90%). The variation of volume density for F and Ar atoms are measured by the optical emission spectroscopy. As CF$_4$increased in CF$_4$/Ar plasma, the emission intensities of F increase, but Ar atoms decrease, which confirms our suggestion that emission intensity is proportional to the volume density of atoms. From X-ray photoelectron spectroscopy, the intensities of the Bi-O, the Eu-O and the Ti-O peaks are changed. By pure Ar plasma, intensity peak of the oxygen-metal (O-M : TiO$_2$, Bi$_2$O$_3$, Eu$_2$O$_3$) bond was seemed to disappear while the intensity of pure oxygen peak showed an opposite tendency. After the BET thin films was etched by CF$_4$/Ar plasma, the peak intensity of O-M bond increase slowly, but more quickly than that of peak belonged to pure oxygen atoms due to the decrease of Ar ion bombardment. Scanning electron microscopy was used to investigate etching Profile. The Profile of etched BET thin film was over 85$^{\circ}$./TEX>.

• Transactions on Electrical and Electronic Materials
• /
• 제13권1호
• /
• pp.6-9
• /
• 2012

In this study, we carried out an investigation of the etching characteristics (etch rate, selectivity to $SiO_2$) of ZnO thin films in $N_2/Cl_2$/Ar inductivity coupled plasma. A maximum etch rate and selectivity of 108.8 nm/min and, 3.21, respectively, was obtained for ZnO thin film at a $N_2/Cl_2$/Ar gas mixing ratio of 15:16:4 sccm. The plasmas were characterized by optical emission spectroscopy. The x-ray photoelectron spectroscopy analysis showed the efficient destruction of oxide bonds by ion bombardment. An accumulation of low volatile reaction products on the etched surface was also shown. Based on this data, an ion-assisted chemical reaction is proposed as the main etch mechanism for plasmas containing $Cl_2$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.247-247
• /
• 2009

3차원 반도체 패키징에서 관통전극 Through Silicon Via (TSV)를 형성하기 위하여 이온과 래디컬의 활성도 조절이 가능한 pulsating inductively coupled plasma (ICP) 식각을 수행하였다. 본 식각공정에서는 펄스주파수 ($50{\sim}500Hz$)와 듀티 싸이클 ($20{\sim}99%$)을 조절하여, 플라즈마 내 이온과 래디컬들의 활성도 변화를 발생시켰다. 플라즈마 공정변수에 따라 식각형태가 달라짐을 S.E.M을 이용하여 확인했으며, 이온(SFx+, O+)과 래디컬 ($SF^*$, $F^*$, $O^*$)의 농도 및 활성도 변화를 측정하기 위하여 광학적 기술인 optical emissin spectroscopy와 전기적 특성 측정 기술인 Langmuir probe 시스템을 직접 제작 설치하여 펄스플라즈마를 진단하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2003년도 제24회 학술발표회 초록집
• /
• pp.216-216
• /
• 2003

• 한국전기전자재료학회논문지
• /
• 제24권12호
• /
• pp.935-938
• /
• 2011

The etching characteristics of ZnO and etch selectivities of ZnO to $SiO_2$ in $SF_6$/Ar plasma were investigated using Inductively-coupled-plasma (ICP). The maximum etch rates of ZnO were 6.5 nm/min at $SF_6$(50%)/Ar(50%), Source power (700 W), Bias power (250 W), Working pressure(8 mTorr). The etch rate of ZnO showed a non-monotonic behavior with increasing from 0% to 50% Ar fraction in $SF_6$/ Ar plasma. The plasma diagnostic were characterized using Optical Emission Spectroscopy (OES) analysis measurements.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.846-851
• /
• 2007

In this work, the etching characteristics of $Ge_2Sb_2Te_5(GST)$ thin films were investigated using an inductively coupled plasma (ICP) of $Cl_2/Ar$ gas mixture. To analyze the etching mechanism, an optical emission spectroscopy (OES) and surface analysis using X-ray photoelectron spectroscopy (XPS) were carried out. The etch rate of the GST films decreased with decreasing Ar fraction. At the same time, high selective etch rate over $SiO_2$ films was obtained and the selectivity over photoresist films decreased with increasing the he fraction. From XPS results, we found that Te halides were formed at the etching surface and Te halides limited the etch rate of the GST films.