• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.957-962
• /
• 2005

Today, the elderly is increasing gradually in the Republic of Korea society and this problem will be more serious in the near future. Therefore, engineering support for aged people is required. We are establishing a new field of healthcare engineering for elderly people and aiming to support for aged people and disabled people using adaptive control and instrument technology. In this paper, the goal is to implement the shared control of a robot mobility aid for the elderly. As using this type of assistive technology to be useful by its intended user community, it supports elderly people and handicapped people to live independently in their private homes. The interface transforms the force applied by the user into the robot's motion. Devices like buttons, joysticks, and levers already exist for relaying user input; however, they require hand displacement that would loosen or otherwise release the user's hold. Such interfaces make operation very difficult and potentially unsafe. Therefore, we propose a shared control system. It's safe more than joysticks and buttons. The shared control is a means of registering the user's intention through physical interaction. It's an important component in the development of robotic elderly assistant. The concept of shared control describes a system which is two or more independent control systems. We are using that the three component blocks consist of pressure sensor (flexible force sensor), circuit of measurement and transfer function. Experimental trials of this paper have been tested at the indoor environment. The robot is able to know the user intended direction through haptic device were logged along with the robot's force sensor.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.183-189
• /
• 2010

A localization system for indoor robots is an important technology for robot navigation in a building. Our localization system imports the GPS system and consists of more than 3 satellite beacons and a receiver. Each beacon emits both an ultrasonic wave and radio frequency. The receiver in the robot computes the distance from it to the beacon by measuring the flying time difference between ultrasonic wave and radio frequency. It then computes its position with the distance information from more than 3 beacons whose positions are known. However, the distance information includes errors caused from the ultrasonic sensors; we found it to be limited to within one period of a wave (${\pm}2\;cm$ tolerance). This paper presents a method for predicting the maximum position error due to distance information errors by using Taylor expansion and singular value decomposition (SVD). The paper also proposes a measuring parameter such as sensitivity to represent the accuracy of the indoor robot localization system in determining the robot's position with regards to the distance error.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.167-178
• /
• 2023

Our society is rapidly changing, and there is a growing demand for various convenience services in our daily lives. Among these services, railway and subway stations require tailored wayfinding services to accommodate individuals with disabilities. Currently, signage and information desks are the primary means of navigation. However, individuals with disabilities often rely on assistance from others due to physical discomfort or cognitive impairments. In this paper, we propose a customized wayfinding system within railway stations to assist individuals with disabilities. This system aims to ensure safe and convenient mobility in complex indoor environments, including transfer facilities.

• Journal of the Korean Geographical Society
• /
• v.45 no.1
• /
• pp.144-164
• /
• 2010

This study aims to reveal path selection strategies and individual differences in a navigation task. Two experiments were presented that studied human route planning performance as well as the cognitive strategies and processes involved. For the outdoor task, university students were asked to select a route based on the instruction, i.e. to find the best route from the campus main gate to the Education Building for conference visitors by locating eight signposts. Results indicate (1) that locations of signposts were selected preferably at decision points where the traveler needs to make a choice and starting/ending points of the navigation task and (2) a variety of route planning strategies considering efficiency goal (e.g., the shortest path), environmental characteristics (e.g., fewest turns), and aesthetic purpose (e.g., most scenic) were used. It is notable that some participants took into account more than one path by locating one or two signposts on an alternative route while others preferred a linear route connecting signposts between the start point and the destination. Prior to the main experiment, the same participants were asked to complete the same task inside the classroom to investigate changes in strategies between two tasks. Participants often tend to place signposts at more regular intervals for the indoor navigation task than the same task conducted outside.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.706-711
• /
• 2008

This paper is presented an accurate localization scheme for mobile robots based on the fusion of ultrasonic satellite (U-SAT) with inertial navigation system (INS), i.e., sensor fusion. Our aim is to achieve enough accuracy less than 100 mm. The INS consist of a yaw gyro, two wheel-encoders. And the U-SAT consist of four transmitters, a receiver. Besides the localization method in this paper fuse these in an extended Kalman filter. The performance of the localization is verified by simulation and two actual data(straight, curve) gathered from about 0.5 m/s of driving actual driving data. localization methods used are general sensor fusion and sensor fusion through Kalman filter using data from INS. Through the simulation and actual data studies, the experiment show the effectiveness of the proposed method for autonomous mobile robots.

• Journal of Advanced Navigation Technology
• /
• v.14 no.4
• /
• pp.545-552
• /
• 2010

In this paper, we study on a radio multiple sensing interface module to accurately decide serious error sources that are happened by unexpectable problems in industrial fields, in addition, we study a reliability improvement scheme to guarantee the integrity of multiple sensing data. For multiple sensing interface module, communication drivers such as USART, TWI, ADC and GPIO-I2C are implemented. to improve the transmission reliability, reed-Solomon code is used. From the simulation result of this system in indoor environment, we confirm that the reliability of RS coded data is improved about 5 times than uncoded data. Moreover, we prove that multiple sensing interface module is suitable to diagnose error sources of industrial automaton equipment.

• Journal of Navigation and Port Research
• /
• v.37 no.3
• /
• pp.269-273
• /
• 2013

Underwater acoustic channels are generally recognized as one of the most difficult communication media because of the multipath propagation, dispersion, and so on. MIMO (Multiple-input multiple-output) techniques have been actively pursued in underwater acoustic communications recently to increase the data rate over the bandwidth-limited channels. The transmit diversity techniques can be applied in this case, and one of them is Alamouti's scheme. In this paper the performances of the transmit diversity technique are evaluated via experiment. Two transmitters and two receivers were used in experiment, and the experiment was performed in indoor water tank. The error rate 5~8% was confirmed in experimental results, and these are the improved values than the error rate 14.8% for SISO(Single-input single-output) channel under same data rate condition.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.181-185
• /
• 2016

In this paper we propose a VR-based Sailor Training Platform Authoring Tool which efficiently trains sailors in immersive ways. Proposed authoring tool consists of virtual environment reconstruction that imports real ship indoor environment into virtual environment and script editing which is able to implement various scenarios in emergency based on just drag-and-drop interface. The aim of importing real ship environment and supporting various VR devices is to enhance immersiveness and training so that trainees can deal with serious emergency events. Also the usefulness of the interface enables to reduce the cost of making training materials. Throughout scenario editing interface, the proposed authoring tool supports the editing of multi-user scenario and setting individual task for the evaluation.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.203-210
• /
• 2002

In this paper, the BER performance of IEEE 802.11a OFDM WLAN system is obtained by simulation and it is shown that the proposed modified channel estimation algorithm improves the channel estimation performance of the system. The wireless channel used in channel simulation includes AWGN and delay spread channel implemented by TDL model. At first, the performance of OFDM WLAN system according to data rate and coding rate defined in standard is evaluated in AWGN channel. Then, imperfect channel estimation in indoor wireless channel is considered. After the performance of conventional channel estimation scheme using only two long training symbols is evaluated, and that of proposed modified channel estimation scheme using additional 8 short training symbol is compared with it. From the simulation results, it is shown that modified channel estimation scheme provides reduced channel estimation error and improves the channel estimation performance due to noise averaging effect with the same preamble format as defined in specification.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.677-683
• /
• 2009

In this study, we designed and implemented testbed for localization algorithm by using a area reduction method in outdoor environment. The proposed algorithm used 3 steps of area reduction method, which estimated blind nodes position. Also, we have experimented with using a Zigbee module for 5 fixed reference nodes and 4 blind nodes in sensor field of $60m{\times}23m$. The results show that our algorithm is improved the localization accuracy even at the number of ref. node is fixed and the number of blind node is increased. In future research, we will be adding the function of seamless localization in indoor and NLOS(non-line of sight) environment.