In this study, MCQ (Micronized copper Quat) which was copper-based wood preservative, was investigated on decay properties by difference of the its infiltration volume. After pressure-treatment with different MCQ concentration, test specimens (Japanese Red Pine) were exposed by a brown-rot fungus (Fomitopsis palustris). At the end of the 12 weeks exposure to the fungus, untreated specimen was showed the mass loss of more than 35%, and the value of preservative effectiveness of MCQ by indoor decay was $3.99{\pm}0.42kg/m^3$. Therefore, MCQ should be pressure-injected at least $3.99kg/m^3$. The three dimensional of the specimens were observed by using the light microscope and scanning electron microscope, Untreated and treatment specimens with low concentration generally had underwent serious decays and had a lot of fungal hyphae. Howere, the formation of bore hole by hyphae were not observed. Mass loss and decay properties of specimens were affected by amount of MCQ injection. Therefore, it is necessary to the review of the adequacy of the MCQ injection amount in domestic environments.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.6
/
pp.199-206
/
2016
The aim of this study was to establish the optimal conditions to design a shoe rack that could effectively sterilize and deodorize shoes contaminated by various bacteria. The manufacture and evaluation of a shoe rock was conducted for one year from October 2014 to September 2015. The antibacterial efficacies were evaluated using Escherichia coli and Staphylococcus aureus by JIS Z 2801:2010. The deodorization efficiency was identified by the standard method for deodorization efficiency evaluation of an indoor air cleaner established by Korea Air Cleaning Association, SPS-KACA002-132:2006. The results showed that antibacterial evaluation showed more than 99.9% of the sterilization effects on Escherichia coli and Staphylococcus aureus after exposure to ultraviolet (UV) light for 30 seconds. The average deodorization efficiency for the test gases was 42.5%. The temperature in the shoes and in the shoe rack was lower than $40^{\circ}C$ and $25^{\circ}C$, respectively, when the UV lamp was turned on for 5 minutes and off for 25 minutes repeatedly. This was controlled by turning the UV lamp on and off to maintain the appropriate temperature in the shoes. In conclusion, the real deodorization efficiency is expected to be higher than the measured value because the internal volume of the shoe rack was smaller than the test chamber used to measure the deodorization efficiency. The deodorization effect could be increased further by the sterilization of bacteria causing bad odors in shoes. Further studies will be needed to determine the temperature deviations within the shoe rack to provide constant conditions.
The Seosanmaaesamjonbulsang (National Treasure No. 84) consists of light gray and coarse to mediumgrained biotite granite with partly developed pegmatite and quartz vein. The host rock is divided into dozens of rock blocks with various shape along irregular discontinuity plane. The evaluation results of discontinuity systems reveal that the host rock were exposed to instable sloping environments. Results of deterioration diagnosis show that the degree of damage has been made worse by physical weathering and surface discoloration laying stress on part that vertical and horizontal joints are massed. Generally, deterioration rate of the triad Buddha surface cover with 42.7%, however, the rate of physical weathering and surface discoloration are subdivided to 9.6% and 33.1%, respectively. Ultrasonic measurements indicate that the triad Buddha was reached highly weathered grade in general. And the rock material was weaken to show low velocity zone of 1,000m/s along irregular joint systems. Indoor and outdoor mean relative humidity of the shelter was recorded more than 70% during every season, and high frequency appears in high relative humidity range over 95%. Such environments seem to have produced dew condensation on the rock surface with rainfall and supply water, promoted physical, chemical and biological weathering along crack and joint, resulting in high permeation of water and percentage of water content. Therefore, it is judged that for scientific conservation of the triad Buddha it needs environment control through persistent preservation environment monitoring including water problem.
Journal of the Korean Institute of Landscape Architecture
/
v.48
no.5
/
pp.89-106
/
2020
This study examines the functionality and landscape design specifics of the outdoor space of representative commercial multi-complexes in Korea in order to overview the design trends of outdoor landscaping trends. Through surveying the composition of outdoor spaces along with their relation to the surrounding landscape, open spaces, and the neighboring communities, this paper identified the change in trends regarding the characteristics of outdoor landscape planning and acknowledged the enhanced public value of outdoor space. This study asserts that the characteristics of outdoor spaces can best be understood by examining the ways in which the outdoor space relates to adjoining commercial multi-complexes and the surrounding landscape. Focusing on the relationships that outdoor space establishes, commercial multi-complexes can be categorized as follows: in/outdoor separated type, in/outdoor semi-open type, surrounding landscape-projected type, and surrounding landscape-combined type. By studying the landscape design specifics of the outdoor space of representative cases of each type, the following has been concluded: First, the amount of outdoor space has expanded in terms of importance and function while serving to assist in various activities and participatory experiences, and no longer merely serves as a backdrop of commercial facilities. Second, with the strengthened connectivity between in/outdoor spaces, the elements of outdoor surroundings are more actively introduced indoors to improve amenities. Through directly connecting certain indoor program spaces with outdoor spaces, commercial multi-complexes tend to provide richer combined experiences. Third, with the expansion of outdoor space functionality, commercial multi-complexes are increasingly recognized as a quasi-public space, making good example of liminal space. In light of the recent case of development plans linked with public open spaces in suburban settings, commercial landscape design shows the possibility of creating an open space that can function as a center for local culture and green networks in the community.
Journal of Korean Society for Atmospheric Environment
/
v.24
no.3
/
pp.346-356
/
2008
Asbestos is the name of a group of minerals with long and thin fibers that originate naturally in the environment. Asbestos mainly affects lungs and the membrane that surrounds the lungs. In general, PCM (phase contrast microscopy) and PLM (polarized light microscopy) have been used to analyze asbestos fibers. However, these methods have often problems to over-estimate number concentration when counting real asbestos fibers. Moreover, there are many difficulties when separating and identifying various asbestos and non-asbestos fibers. In order to determine quantitative information on fibrous particles, source profiles for asbestos and non-asbestos fibers must be initially developed on the basis of their chemical compositions and physical parameters. In our study, a SEM/EDX was used to develop source profiles from known asbestos samples as reference samples. We could make the source profile matrix consisting of 6 types of asbestos fibers and 2 types of non-asbestos fibers by analyzing 380 fibers. Based on these profiles, a rule building expert system was developed by using the visual basic application (VBA). Various fibers were successfully classified by 2 simple rules in the EXCEL environment based on several visual steps such as inserting data, viewing results, and saving results. For a case study to test the expert system, samples from a construction materials and from various indoor environments such as a residental area, a preschool classroom, and an underground store were collected and analyzed. As a result of the survey, a total of 76 individual test fiber particles was well classified into 5 different types of particle classes; 9.3% of chrysotile, 15.4% of amosite, 0.8 of crocidolite, 4.2% of tremolite, 5.8% glass fiber, 21.1% of other fibers, and 43.5% of unknown fibers in terms of number concentration. Even though unknown portion was high, it will be decreased markedly when expanding fiber source profiles.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.7
/
pp.420-424
/
2016
In this study, we developed photocatalytic technology to address the emerging serious problem of air pollution through indoor air cleaning. A single layer of $WO_3$ was prepared by using the dry process of general RF magnetron sputtering. At a base vacuum of $1.8{\times}10^{-6}$[Torr], the optical and electrical properties of the resulting thin films were examined for use as a transparent electrode as well as a photocatalyst. The single layer of $WO_3$ prepared at an RF power of 100 [W], a pressure of 7 [mTorr] and Ar and $O_2$ gas flow rates of 70 and 2 sccm, respectively, showed uniform and good optical transmittance of over 80% in the visible wavelength range from 380 [nm] to 780 [nm]. The optical catalyst characteristics of the $WO_3$ thin film were examined by investigating the optical absorbance and concentration variance in methylene blue, where the $WO_3$ thin film was immersed in the methylene blue. The catalytic characteristics improved with time. The concentration of methylene blue decreased to 80% after 5 hours, which confirms that the $WO_3$ thin film shows the characteristics of an optical catalyst. Using the reflector of a CCFL (cold cathode fluorescent lamp) and the lens of an LED (lighting emitting diode), it is possible to enhance the air cleaning effect of next-generation light sources.
The present study was performed to describe the influence of water temperature and salinity on the filtration rates of the short-necked clam, Ruditapes philippinarum. The clams were collected at tidal flat near Yeosu city, Cheollanamdo, Korea, from July 2001 to August 2001. Diatoms, Phaeodactylum tricornutum (KMCC B-128), were indoor-cultured by f/2 medium, and were used to measure the filtration rate of the clams. Filtration rates of the clams were measured by indirect method. Cell concentrations of food organisms were determined by direct counting cells using the hemacytometer under the light microscope. The filtration rate of the clams increased with temperatures up to the optimum temperature, circa 25$^{\circ}C$. Above this optimum temperature, the filtration rate decreased drastically. Also the filtration rate of the clams increased with salinity up to 35 psu. The maximal filtration rates of the clams were recorded at 20-25$^{\circ}C$, similar to be known as the optimal temperature for their growth, and 25-35 psu, respectively. The minimal filtration rates of the clams were recorded at 5$^{\circ}C$ and 15 psu. At the similar temperature and salinity, the filtration rate of the younger clams was higher than that of the older ones. Thermal coefficient, Q$_{10}$ values at low temperature range were much higher than those at high temperature range. These results indicate the short-necked clam is more sensitive in cold water. As they grow up, they become more stronger against their ambient environmental changes, such as thermal-shock, salinity changes.
Comparison of fish number on routine oxygen consumption (OC) of black porgy (Acanthopagrus schlegeli) reared in seawater (SW) versus freshwater (FW) was performed in closed water-recirculating system containing respiratory chamber. Fish acclimated in separate indoor tanks with SW or FW were sampled as two groups (one or three of fish used, $mean\;{\pm}\;S.D.=36.4{\pm}9.8$). OC of fish reared in both SW and FW showed clear temporal rhythms, with higher values in the daytime and lower values at night, in accordance with light (09:00-21:00 h) and dark (21:00-09:00 h) phases of the diel cycle (12L:12D). The OC of the fish increased linearly with the water temperature. The OCs of black porgy reared in SW and FW at 15, 20, $25^{\circ}C$ were 140.0, 174.8, 282.3 mg $O^2{\cdot}kg^{-1}{\cdot}h^{-1}$ and 177.5, 307.8, 413.1 mg $O^2{\cdot}kg^{-1}{\cdot}h^{-1}$ for the one of fish used, and 200.5, 274.7, 339.1 mg $O^2{\cdot}kg^{-1}{\cdot}h^{-1}$ and 118.2, 188.2, 252.8 mg $O^2{\cdot}kg^{-1}{\cdot}h^{-1}$ for three of fish used, respectively. Black porgy reared in SW had higher ventilation rates than those in FW. These results indicate that black porgy reared in FW had higher OC than those in SW at the one of fish used, but the fish reared in SW had higher OC than those in FW at the three of fish used.
Han, Mun Hyun;Choi, Gyu Dong;Seo, Hong Seok;Mheen, Bong Ki
Korean Journal of Optics and Photonics
/
v.29
no.5
/
pp.204-214
/
2018
Since LIDAR is advantageous for accurate information acquisition and realization of a high-resolution 3D image based on characteristics that can be precisely measured, it is essential to autonomous navigation systems that require acquisition and judgment of accurate peripheral information without user intervention. Recently, as an autonomous navigation system applying LIDAR has been utilized in human living space, it is necessary to solve the eye-safety problem, and to make reliable judgment through accurate obstacle recognition in various environments. In this paper, we construct a single-shot LIDAR system (SSLs) using a 1550-nm eye-safe light source, and report the analysis method and results of LIDAR signals for various measurement environments, reflective materials, and material angles. We analyze the signals of materials with different reflectance in each measurement environment by using a 5% Al reflector and a building wall located at a distance of 25 m, under indoor, daytime, and nighttime conditions. In addition, signal analysis of the angle change of the material is carried out, considering actual obstacles at various angles. This signal analysis has the merit of possibly confirming the correlation between measurement environment, reflection conditions, and LIDAR signal, by using the SNR to determine the reliability of the received information, and the timing jitter, which is an index of the accuracy of the distance information.
Kim, Jinsu;Jang, Youjung;Kim, Jinseok;Park, Minwoo;Bu, Chanjong;Lee, Yungu;Kim, Younha;Woo, Jung-Hun
Journal of Environmental Impact Assessment
/
v.27
no.4
/
pp.378-393
/
2018
As atmospheric fine dust problems in Korea become more serious, there are growing needs to find the concentration of fine particles in indoor and outdoor areas and there are increasing demands for sensor-based portable monitoring devices capable of measuring fine dust concentrations instantly. The low-cost portable monitoring devices have been widely manufactured and used without the prescribed certification standards which would cause unnecessary confusion to the concerned public. To evaluate the reliability those devices and to improve their usability, following studies were conducted in this work; 1) The comparisons between sensor-based devices and comparison with more accurate devices were performed. 2) Several experiments were conducted to understand usefulness of the portable monitoring devices. As results, the absolute concentration levels need to be adjusted due to insensitivity of the tiny light scattering sensors in the portable devices, but their linearity and reproducibility seem to be acceptable. By using those monitoring devices, users are expected to have benefits of recognizing the changes of concentration more quickly and could help preventing themselves from the adverse health impacts.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.