• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.104-109
• /
• 2011

I present a method of aspheric surface profile measurement using 2nd derivative of local area profile. This method is based on the principle of curvature sensor which measures the local 2nd derivative under test along a line. The profile is then reconstructed from the data on the each point. Unlike subaperture-stiching method and slope detection method, 2nd derivative method has strong points from a geometric point of view in measuring the aspheric surface profile. The second derivative terms of surface profile is an intrinsic property of the test piece, which is independent of its position and tip-tilt motion. The curvature is measured at every local area with high accuracy and high lateral resolution by using White-light scanning interferometry.

• 대한전자공학회논문지
• /
• 제21권2호
• /
• pp.24-28
• /
• 1984

이선 선로를 통한 full-duplex 데이타 전송에 있어서 hybrid-coupler의 불완전한 송·수신에 따른 반향신호는 데이타 검출에 큰 장애가 되고 있다. 본 논문에서는 산술평균에 의한 반향신호 추정법을 제시하고 이를 적응 디지탈 필터에 의한 추정법과 이론적 해석 및 컴퓨터 시뮬레이션을 통해 비교하였다. 양자화 효과를 고려한 이론적인 해석 결과 산술평균 추정을 사용한 반향제거는 hardware 구성이 간단하면서도 수렴이 매우 빠름을 밝혔다. 특히 제시된 방식은 선로 감쇠량에 관계없이 반향신호를 정해진 시간내에 충분히 제거할 수 있다.

• 대한전자공학회논문지TC
• /
• 제41권7호
• /
• pp.47-53
• /
• 2004

에스컬레이터 (ESC) 구조의 장점인 완잔 직교화 성질을 복소 채널 Equalization 및 직교변조방식의 Equalization에 적용할 수 있도록 하기 위해 ESC 구조에 복소연산을 적용함으로서 복소 ESC 구조 Equalizer를 설계하였다. 고유치 분포비가 크게 다른 채널 모델에 대한 복소 Equalizer 들의 수렴성능을 비교해 본 결과 고유치 분포비 (ESR) 값이 증가에 따라 수렴속도에 있어서 제안한 복소 ESC Equalizer는 영향을 받지 않았다. 또한 QPSK 전송-복소 채널 모델에 대하여도 시뮬레이션을 시행한 결과 기존의 복소 TDL-LMS 보다 약 7 배의 빠른 수렴을 보여 제안한 복소 ESC Equalizer의 우수한 특성을 확인할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.421-425
• /
• 2013

The effect of pretreatment on indium-tin oxide (ITO) electrodes has been rarely studied, although that on metal and carbon electrodes has been enormously done. The electrochemical and surface properties of ITO electrodes are investigated after 6 different pretreatments. The electrochemical behaviors for oxygen reduction, $Ru(NH_3){_6}^{3+}$ reduction, $Fe(CN){_6}^{3-}$ reduction, and p-hydroquinone oxidation are compared, and the surface roughness, hydrophilicity, and surface chemical composition are also compared. Oxygen reduction, $Fe(CN){_6}^{3-}$ reduction, and p-hydroquinone oxidation are highly affected by the type of the pretreatment, whereas $Ru(NH_3){_6}^{3+}$ reduction is almost independent of it. Interestingly, oxygen reduction is significantly suppressed by the treatment in an HCl solution. The changes in surface roughness and composition are not high after each pretreatment, but the change in contact angle is substantial in some pretreatments.

• 한국CDE학회논문집
• /
• 제14권4호
• /
• pp.261-270
• /
• 2009

We can save a lot of efforts and time to perform various kinds of multibody system dynamics simulations if the equations of motion of the multibody system can be formulated automatically. In general, the equations of motion are formulated based on Newton's $2^{nd}$law. And they can be transformed into the equations composed of independent variables by using velocity transformation matrix. In this paper the velocity transformation matrix is derived based on a topological modeling approach which considers the topology and the joint property of the multibody system. This approach is, then, used to formulate the equations of motion automatically and to implement a multibody system dynamics simulation program. To verify the the efficiency and convenience of the program, it is applied to the lifting simulation of a floating crane.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권4호
• /
• pp.231-236
• /
• 2004

A normally open thermopneumaticc-actuated microvalve has been fabricated and their properties are investigated. The advantages of the proposed microvalve are of the low cost fabrication process and the transparent optical property using polydimethylsiloxane (PDMS) and indium tin oxide (ITO) glass. The fabricated microvalves with in-channel configuration are easily integrated with other microfluidic devices on the same substrate. The fabrication process of thermopneumatic-actuated microvalvesusing PDMS is very simple and its performance is very suitable for a disposable lab-on-a-chip. The PDMS membrane deflection increases and the flow rates of the microchannel with microvalvels decrease as the applied power to the ITO heater increases. The powers at flow-off are dependent on the membrane thickness and the applied inlet pressure but are independent of the channel width of microvalves. The flow rate is well controlled by the switching function of ITO heater and the closing/opening times are around 20 sec and 25 sec, respectively.

• 한국산학기술학회논문지
• /
• 제3권1호
• /
• pp.44-48
• /
• 2002

음식물을 장기 저장하기 위해서는 각 음식물에 적합한 온도에서 저장하여야 하는데, 우리 식생활에서 필수적인 김치의 최적 저장 온도는 0∼5℃이다. 김치의 신선도를 유지하기 위해서는 저장 온도뿐만 아니라 김치의 숙성에 필요한 미생물을 조절하기 위한 용기의 재질도 중요한 요인으로 작용한다. 본 연구에서는 김치내의 미생물 활동에 최적의 조건을 유지할 수 있는 토기 용기를 이용한 저장고를 개발하여 기존의 상용화된 제품과 특성을 비교 분석하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2004년도 봄 학술발표논문집 Vol.31 No.1 (B)
• /
• pp.721-723
• /
• 2004

A trust-region method is a quite attractive optimization technique. It is, in general, faster than the steepest descent method and is free of a learning rate unlike the gradient-based methods. In addition to its convergence property (between linear and quadratic convergence), ifs stability is always guaranteed, in contrast to the Newton's method. In this paper, we present an efficient implementation of the maximum likelihood independent component analysis (ICA) using the trust-region method, which leads to trust-region-based ICA (TR-ICA) algorithms. The useful behavior of our TR-ICA algorithms is confimed through numerical experimental results.

• Structural Engineering and Mechanics
• /
• 제50권5호
• /
• pp.679-695
• /
• 2014

A design method of second generation wavelet (SGW)-based multivariable finite elements is proposed for static and vibration beam analysis. An important property of SGWs is that they can be custom designed by selecting appropriate lifting coefficients depending on the application. The SGW-based multivariable finite element equations of static and vibration analysis of beam problems with two and three kinds of variables are derived based on the generalized variational principles. Compared to classical finite element method (FEM), the second generation wavelet-based multivariable finite element method (SGW-MFEM) combines the advantages of high approximation performance of the SGW method and independent solution of field functions of the MFEM. A multiscale algorithm for SGW-MFEM is presented to solve structural engineering problems. Numerical examples demonstrate the proposed method is a flexible and accurate method in static and vibration beam analysis.

• 산업융합연구
• /
• 제1권1호
• /
• pp.71-97
• /
• 2003

In this study, the main goal is conduct an empirical research for MNC's(multinational companies) contingency factors and entry modes. Through examining elements of success and limitations of foreign companies in the domestic market, a resulting purpose can be suggested such as developing attractive foreign investment policy. The results in this study are as below. The results from Logistic Regression Analysis there were indications for preference factors for WOS (Wholly Owned Subsidiary). The factors were 'Strategic Motivation', 'Intelligent Property', and 'Market Latent Purchasing Power'. For JV (Joint Venture) there were preferred factors such as 'Degree of Using Product Factors', 'Differential Products Development Ability', and 'Systematic Incentives'. However, this thesis is limited to identifying clear causal relationship between the 'Performance' of foreign investment enterprise which entered WOS or JV and various factors which were suggested in the contingency factors (independent variables).