• The Journal of the Acoustical Society of Korea
• /
• 제17권2E호
• /
• pp.10-15
• /
• 1998

Application of the Filtered-X LMS adaptive filter to active noise cancellation requires to estimate the transfer characteristics between the output and the error signal of the adaptive canceler. In this paper, we derive an adaptive cancellation algorithm and analyze is convergence behavior when the acoustic noise is assumed to consist of multiple sinusoids. The results of the convergence analysis of the Filtered-X LMS algorithm indicate that the effects of parameter estimation inaccuracy on the convergence behavior of the algorithm are characterize by two distinct components : Phase estimation error and estimated magnitude. In particular, the convergence of the Filtered-X LMS algorithm is show to be strongly affected by the accuracy of the phase response estimate. Simulation results of the algorithm are presented which support the theoretical convergence analysis.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.87-92
• /
• 1999

Generally the life of die is limited by fatigue fracture or dimensional inaccuracy originated from wear. In this paper to predict the fatigue life of die the stress and strain histories of die can be predicted by the analysis of elastic-plastic finite element method and the elastic analysis of die during the process analysis of workpiece. Also the stress-life curve of die material can be obtained through experiment. With the above to재 facts we propose the analysis method of prediction fatigue life in die,. In the proposed model the analysis of elastic-plastic finite element method for material is carried out by using ABAQUS. Surface force resulted from the contacting border of the die and workpiece is transformed into the nodal force of die to implement elastic analysis. besides the proposed analysis model of die is applied to extrusion die and forging. die.

• Structural Engineering and Mechanics
• /
• 제16권3호
• /
• pp.361-369
• /
• 2003

In this paper, the structural behavior of R/C cylindrical panel is analyzed by experimental results. To avoid the geometric imperfection, R/C shell specimens are made by use of a stiff steel mold. From experimental results, the load carrying behavior of R/C cylindrical panel is presented under an external lateral pressure. Even if R/C shell does not posses geometric imperfections, the inaccuracy of the reinforcement position strongly affects to the ultimate strength and the failure patterns of such shells. To explain these effects, FEM nonlinear analyses are done under the same conditions as those of experiments. The behavior of R/C cylindrical shells are well simulated under the consideration of both the geometric imperfection and several inaccuracies.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1598-1603
• /
• 2013

Recently, researches on analyzing relationship between the state of emotion and musical stimuli are increasing. In many previous works, data sets from all extracted channels are used for pattern classification. But these methods have problems in computational complexity and inaccuracy. This paper proposes a selection of optimal EEG channel to reflect the state of emotion efficiently according to music listening by analyzing stochastic feature vectors. This makes EEG pattern classification relatively simple by reducing the number of dataset to process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1832-1835
• /
• 1997

Off-line programming systems are widely spread in assembly lines of minute electronic products to huge offshore structures. Any OLP system has to be calibrated before the on-line robot tasks are performed because there are inherent differences between the CAD model on OLP and the real robot workspace. This paper uses simple geometric expressions to propose a calibration method applicable to an OLP for SCARA robots. A positioning task on the two-dimensional horizontal surface was used in the error analysis of a SCARA robot and the anaysis shows that the inaccuracy results from the two error sources non-zero offset angles of two rotational joints at the zero return and differences in link lengths. Pen marks on a sheet of plotting paper are used to determine the accurate data on the joint centers and link dimensions. The calculated offset angles and link lengths are fed back to the OLP for the calibration of the CAD model of the robot and task environments.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.422-427
• /
• 2008

This study is to illustrate the usefulness of Kriging Dimension Reduction Method(KDRM), which is to construct probability distribution of response function in the presence of the physical uncertainty of input variables. DRM has recently received increased attention due to its sensitivity-free nature and efficiency that considerable accuracy is obtained with only a few number of analyses. However, the DRM has a number of drawbacks such as instability and inaccuracy for functions with increased nonlinearity. As a remedy, Kriging interpolation technique is incorporated which is known as more accurate for nonlinear functions. The KDRM is applied and compared with MCS methods in a compression coil spring design problem. The effectiveness and accuracy of this method is verified.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.377-380
• /
• 2000

In this paper, a new adaptive linearizer architecture with the predistorter is proposed. In the M.Ghaderi's paper, two analog predistorters and an envelope detector are used. Analog circuits for the analog predistorter and the envelope detector can cause imperfection and inaccuracy of the system and make circuits more complex. To solve those problems, most of processes including the predistortion are made by the DSP. The RLS algorithm is applied so that the errors between power amplifier output signals through the postdistorters and predistorted input signals can be converged to the global minimum.

• 전자공학회논문지C
• /
• 제35C권4호
• /
• pp.11-20
• /
• 1998

Fault simulatior has been used to compute exact fault coverages of test vectors for digial circuits. But it is time consuming because execution time is proportional to square of circuit size. Recently, several algorithms for testability analysis have been published to cope with these problems. COP is very fast and accurate but cannot be used for sequential circuits, while STAFAN can be used for sequential circuits but needs vast amount of execution time due to good circuit simulation. We proposed EXTASEC which gave fast and accurate fault coverage. But it shows noticeable errors for a few sequential circuits. In this paper, it is shown that the inaccuracy is due to uninitializble flipflops, and we propose ITEM to improve the EXTASEC algorithm. ITEM is an improved evaluation method of fault coverage by analysis of backward lines and uninitializable flipflops. It is expected to perform efficiently for very large circuits where execution time is critical.

• 대한전자공학회논문지
• /
• 제12권1호
• /
• pp.12-17
• /
• 1975

광대역의 계수율을 선택 스윗치 없이 계측하기 위한 대수계수율회로에 관한 해석을 하였고 그에 의한 다데케이드 계수율회로의 구성방법과 실험결과를 지시하였다. 이 대수계수율회로는 주기적인 입력 펄스 뿐만 아니라, Poisson분포를 갖는 random한 펄스에 대하여도 대수적인 응답특성을 가지며 계수율 1pps로 부터 $10^5$pps까지 데케이드의 영역에 걸쳐 좋은 대수특성을 가지며 또한 낮은 영역과 높은 영역에서의 특성저하의 원인을 규명하여 양단에서의 특성을 효과적으로 보상하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.102-105
• /
• 2001

The spring back taking place after the coiling process of steam generator tube leads to the dimensional inaccuracy. In order to reduce the spring back, tension force was applied to the one end of the tube during forming. In this work, parametric study using FEM was performed to find the appropriate magnitude of tension force. The force that induces minimum suing back was found by simultaneously taking account of suing back amount, cross-sectional ovality, and thickness of the tube wall after deformation. In addition, stress relieving by heat treatment was also simulated as an alternative to the former method. The latter was found to be more effective under the given constraints.