• 전력전자학회논문지
• /
• 제15권6호
• /
• pp.498-505
• /
• 2010

In-Wheel System은 고성능의 전기모터를 Wheel에 직접 장착하여 파워트레인 요소를 모두 제거함으로써 차량시스템의 효율을 높인 시스템이다. 추후 친환경 차량에 적용할 수 있는 신개념의 플랫폼을 제공할 수 있는 고효율, 고성능 차량 시스템이기에 다양한 분야에 적용되고 있다. 이러한 시스템의 급증은 우리 생활의 안전과 직결되므로 개발단계에서 부품의 신뢰성을 확인하고 인증하여야 한다. 신뢰성이란 "부품이나 시스템이 주어진 환경에서 고장 없이 일정기간 동안 요구기능을 수행하는 특성"이다. 따라서 본 논문에서는 In-Wheel System의 핵심 부품인 In-Wheel Motor를 신뢰성 평가 중 하나인 내구 수명에 대한 검증 방안을 In-Wheel Motor의 운전 조건으로부터 가감속 토크 및 실효토크를 계산해서 이를 바탕으로 가속수명시험을 위한 속도 패턴을 제안하여 시험시간을 단축하고, 또한 In-Wheel Motor의 수명 신뢰성을 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1366-1370
• /
• 2005

As the development of microprocessor technology, electric power steering (EPS) system which uses an electric motor came to use a few years ago. It can solve the problems associated with hydraulic power steering. The motor only operates when steering assistance is needed, so it can save fuel and can reduce weight and cost by eliminating hydraulic pump and piping. As one of performance criteria of EPS systems, the transmissibility from road wheel load to steering wheel torque is considered in the paper. The transmissibility can be studied by fixing the steering wheel and calculating the torque needed to hold the steering wheel from road wheel load. A proportion-plus-derivative control is needed for EPS systems to generate desired static torque boost and avoid transmissibility of fluctuation. A pure proportion control can't satisfy both requirements.

• 로봇학회논문지
• /
• 제18권3호
• /
• pp.299-307
• /
• 2023

In the midst of accelerating wars around the world, unmanned robot technology that can guarantee the safety of human life is emerging. ERP-42 is a modular platform that can be used according to the application. In the field of defense, it can be used for transporting supplies, reconnaissance and surveillance, and medical evacuation in conflict areas. Due to the nature of the military environment, atypical environments are predominant, and in such environments, the platform's path followability is an important part of mission performance. This paper focuses on reducing the minimum turning radius in terms of improving path followability. The minimum turning radius of the existing 2WS/2WD in-wheel platform was reduced by increasing the torque of the independent driving in-wheel motor on the rear wheel to generate oversteer. To determine the degree of oversteer, two GPS were attached to the center of the front and rear wheelbases and measured. A closed-loop speed control method was used to maintain a constant rotational speed of each wheel despite changes in load or torque.

• 한국산업정보학회논문지
• /
• 제28권4호
• /
• pp.35-43
• /
• 2023

차세대 전기자동차에서는 전비 향상 및 주행 성능 개선을 위하여 각 휠에 의해 직접적으로 토크를 제어하는 인 휠 모터 시스템에 대한 연구가 진행되고 있다. 이에 따라 본 논문에서는 전기자동차 구동용 인 휠 모터에 적용되는 토크 벡터링 시스템에서 각 휠에 가해지는 토크를 분배하는 알고리즘에 대한 연구를 수행하였다. 차량의 주행 및 조향에 따른 실제 차량 특성 파라미터를 적용한 차량 모델을 구현하기 위해 MATLAB Simulink 환경에서 시뮬레이션을 진행하였으며 제안된 알고리즘에 따라 토크 분배가 이뤄지는 것을 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제8권6호
• /
• pp.498-505
• /
• 2002

Reducing odometer errors caused by kinematic imperfections in wheeled mobile robots is imestigated. Wheel diameters and wheelbase are corrected by using encoders without landmarks. A new velocity trajectory is proposed that compensates for an orientation error due to acceleration- resolution constraints on motor controllers. Based on this velocity trajectory, the wheel velocity of one out of two driven wheels may be changed by the traveled distance of the mobile robot. It is shown that a wheeled mobile robot can't move along a straight line exactly, even if kinematic correction are achieved perfectly, and this phenomenon is attributable to acceleration-resolution constraints on motor controllers. We experiment on a wheeled mobile robot with 2 d.o.f. are used in the experiment to verify the proposed scheme.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.119-125
• /
• 2016

본 논문에서는 기존 휠-레일 고속열차에 자기부상열차의 추진방법을 적용한 하이브리드 방식의 고속열차의 주행 동특성에 대해서 연구하였다. 초전도 선형동기전동기를 추진 동력으로 하는 휠-레일 방식의 고속열차는 강력한 추진력을 지니면서도 자기부상열차에 비해 기존 선로와의 호환성 및 경제성 측면에서 유리할 것으로 예상된다. 본 논문에서는 초전도 선형동기전동기를 기존의 휠-레일 고속철도에 적용하는 두 가지 방안에 대해서, 초전도 선형동기전동기 추진이 휠-레일 고속열차의 동특성에 미치는 영향을 살펴보기 위하여 초전도 선형동기전동기의 회전자와 고정자의 상호 작용을 검토하고 이를 포함한 차량의 동특성 모델을 구축하였다. 구축된 모델을 이용한 시뮬레이션을 통해 초전도 선형동기전동기의 회전자와 고정자의 상호 작용이 주행 중 고속 안정성, 승차감 및 가이드웨이 불규칙도에 미는 영향을 분석하였다.

• 한국지능시스템학회논문지
• /
• 제25권4호
• /
• pp.405-411
• /
• 2015

본 논문은 회전 동력을 직접 바퀴에 전달하는 휠-인 직구동 모터를 제어 대상으로 하여 속도 계측 및 제어시스템을 설계하는 방법에 대한 논문이다. 지능 제어기로서 16비트급 모션제어 전용의 dsPIC30F2010 마이크로프로세서를 사용한다. 프로세서의 여러 기능 중 내부의 최소 기능인 시스템 클럭, PWM, I/O, Timer 및 통신만을 사용하였고, 홀 신호 계측 및 제어 소프트웨어 기능에 대한 동작 특성을 시험하였다. 또한 이러한 기능을 이용하여 PDFF 속도제어 프로그램을 구현하고, 그 실험 결과를 보인다.

• 우주기술과 응용
• /
• 제3권4호
• /
• pp.322-332
• /
• 2023

Satellite attitude-control actuators are equipped with a reaction wheel for three-axis attitude control. The reaction wheel rotates a motor inside the actuator to generate torque in the vector direction. When using the reaction wheel, there are restrictions on the torque values generated as the motor rotates. The torque value of the reaction wheels mounted on small satellites is approximately 10 mNm, and high values are not used. Therefore, three-axis attitude control of a small satellite is possible using a reaction wheel, but this method is not suitable for missions that require rapid attitude control at a specific time. As a technology to overcome the small torque value of the reaction wheel, the control moment gyro (CMG) is currently in wide use as a rapid attitude-control actuator in space satellites. The CMG has an internal gimbal mounted at a right angle to the rotation motor and generates a large torque value. In general, when the gimbal operates, a torque value approximately 100 times greater is generated, making it suitable for rapid posture maneuvering. Currently, we are developing a technology for mounting a controlled moment gyro on a small satellite, and here we share the development status of an 800 mNm CMG.

• 센서학회지
• /
• 제27권2호
• /
• pp.126-131
• /
• 2018

Unlike the hydraulic power steering (HPS) system, which operates by the high pressure of a fluid obtained from the engine power, the motor-driven power steering (MDPS) system uses an electric motor to steer the wheel without consuming engine power. To steer the wheel with an electric motor, a worm wheel and a worm gear rotating between the steering shaft and motor are required. Any imperfection during the construction of an MDPS system or in a composing part creates noise and vibration, which can be sensed by a driver. To solve the noise and vibration problems, each part must be designed to not resonate with other parts. In this work, we developed the measurement and analysis systems to obtain the noise and the vibration of an automobile MDPS system. A signal analyzer was equipped with a 96 kHz, 24-bit ADC and a 150 MHz digital signal processor. The predetermined threshold value of the vibration in the MDPS system was used to determine the pass/fail, and the results were displayed on the screen. Our system can be used in the fabrication line to swiftly determine any imperfections in the MDPS system construction.

• 제어로봇시스템학회논문지
• /
• 제19권1호
• /
• pp.45-55
• /
• 2013

With the recent advancement of control method and battery technology, the electric vehicle have been researched to replace the conventional vehicle with electric vehicle with the view point of the environmental concerns and energy conservation. An electric vehicle which is equipped with the independent front steering system and in-wheel motors has advantage in terms of control. For example, the different torque which generated by left and right wheels directly can make yaw moment and the independent steering using outer wheel control is able to reduce the sideslip angle. Using of independent steering and driving system, the 4 wheel electric vehicle can improve a performance better than conventional vehicle. In this paper, we consider the method for improving the cornering performance of independent front steering system and in-wheel motor used electric vehicle with the compensated outer wheel angle and direct yaw moment control. Simulation results show that the method can improve the cornering performance of 4 wheel electric vehicle. We also apply the steering motor failure to steer the vehicle turned by the torque difference without steering. This paper describes an independent front steering and driving, consist of three parts; Vehicle Model, Control Algorithm for independent steering and driving and simulation. First, vehicle model is application of TruckSim software for independent front steering and 4 wheel driving. Second, control algorithm describes the reduced sideslip and direct yaw moment method in view of cornering performance. Last is simulation and verification.