• Journal of the Korean Institute of Educational Facilities
• /
• v.5 no.1
• /
• pp.44-52
• /
• 1998

Nowadays, social environment is rapidly changed toward globalization and information age, and which demands the new paradigm for active utilization of information system in the field of education and many others. The effort to adapt tele-communication technique to educational facilities and the planning to make virtual university come true are needed immediately. Intelligent Building system should be applied to educational facilities to cope with the changing and progressing building system. As a result of the surveying eleven domestic universities, it was found that library management system, administration automation system and office automation system were already introduced, but campus infrastructure such as network system and tele-communication system between buildings in campus have been constructed now. As the conclusion of this study, impeding factors and improvement direction for active utilization of intelligent building systems in university facilities were presented.

• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1722-1729
• /
• 2006

Predicting the mechanical properties of the 3-D scaffold using finite element method (FEM) simulation is important to the practical application of tissue engineering. However, the porous structure of the scaffold complicates computer simulations, and calculating scaffold models at the pore level is time-consuming. In some cases, the demands of the procedure are too high for a computer to run the standard code. To address this problem, the representative volume element (RVE) theory was introduced, but studies on RVE modeling applied to the 3-D scaffold model have not been focused. In this paper, we propose an improved FEM-based RVE modeling strategy to better predict the mechanical properties of the scaffold prior to fabrication. To improve the precision of RVE modeling, we evaluated various RVE models of newly designed 3-D scaffolds using FEM simulation. The scaffolds were then constructed using microstereolithography technology, and their mechanical properties were measured for comparison.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.147-150
• /
• 2003

Power demands are increased because of the growth of the economy and the improvement of a given condition life. For this reason, the fault current of the power system is largely increased and the fault current procedure for the proper interrupting capacity calculation of the existing or the new circuit breaker is essential. This paper is basis on collection of the case of foregin countries. It presented the new procedure of the fault current for the interrupting capacity of the circuit breaker. This procedure is applied to the future power system and calculates the fault current.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.149-153
• /
• 2003

Recently, work-related musculoskeletal disorders(WMSDs) are one of major issues in occupational safety and health in Korea. Main risk factors of WMSDs include manual handling of heavy weight loads, awkward posture, repetitive tasks, Prolonged static muscle contraction, and so on. The number of injured workers has rapidly increased and the related regulation was amended to improve the work conditions and environments. And demands for workers' compensation and improvement of work conditions and environment to prevent WMSDs have increasingly been raised. This study focused on managerial system to prevent WMSDs. Literal survey and questionnaire survey were accomplished to propose a management system in Korea for preventing WMSDs.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.641-647
• /
• 2008

Since korea must get 5.2% reduction of green gas emission and insecurity of economic impact is on the increase due to unstable oil market, the demands of energy saving techniques are increasing. In this paper, we investigate necessity of development of enormous energy used cleanroom energy saving techniques furthermore we also investigate the adoption of dependability management system to develop the energy saving cleanroom development process.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.3
• /
• pp.180-185
• /
• 2019

The demands to improve the performance of the vanadium redox flow battery have attracted an intense research on modifying the carbon-based electrode. In this study, the surface of graphite felt was reformed, using cobalt oxide. The cobalt oxide was implanted into graphite felt during hydrothermal and two step heat treatments. The cobalt was deposited by hydrothermal method and the two step heat treatments made lots of holes on the graphite felt surface which is called as porous surface. The porous surface acts as an electrochemically active site for the cathodic reaction of vanadium redox flow battery. The reformed electrode shows the electrochemically improved performance compared with the pristine electrode.

• Structural Engineering and Mechanics
• /
• v.70 no.3
• /
• pp.303-310
• /
• 2019

Any revision of seismic codes usually demands a higher capacity from structural members, making existing structures unsafe particularly from strength considerations. Retrofitting of capacity deficient members is very suitable for tackling such situations. This paper presents an experimental study on different retrofitting measures adopted for strengthening a series of reinforced concrete (RC) beams. Four identical RC beam specimens were casted, out of which three specimens were strengthened by different schemes (viz., bolted hot rolled flat, bolted cold-formed steel channel, and carbon fibre reinforced polymer (CFRP) laminate, respectively) on their tension face and tested under four-point monotonic loading. This study focuses on the investigation of the flexural behaviour of these retrofitted beams, observed in terms of strength and stiffness. It was concluded that all retrofitting measures improved the structural performance of these beams. However, the cost involved with each strengthening mode was proportional to the improvement in the performance achieved.

• ETRI Journal
• /
• v.42 no.6
• /
• pp.846-858
• /
• 2020

The non-orthogonal multiple access (NOMA) technique offers throughput improvement to meet the demands of the future generation of wireless communication networks. The objective of this work is to further improve the throughput by including an underlay cognitive radio network with an existing multi-carrier NOMA network, using cooperative communication. The throughput is maximized by optimal resource allocation, namely, power allocation, subcarrier assignment, relay selection, user pairing, and subcarrier pairing. Optimal power allocation to the primary and secondary users is accomplished in a way that target rate constraints of the primary users are not affected. The throughput maximization is a combinatorial optimization problem, and the computational complexity increases as the number of users and/or subcarriers in the network increases. To this end, to reduce the computational complexity, a dynamic network resource allocation algorithm is proposed for combinatorial optimization. The simulation results show that the proposed network improves the throughput.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.257-258
• /
• 2021

Construction robotics is rapidly forming a market in conjunction with the development of sensing and artificial intelligence technologies. The layout work for accurately constructing the shape and dimensions of the building frame requires high accuracy and precision, and is one of the high demands for productivity and quality improvement through construction automation. Thus, as a preliminary study, we derived the elemental factors and performance requirements for developing an automated layout robot. In addition, alternatives on driving and marking units were investigated based on literature review and practioner's interview. The result of this study will be used as a basic data for the layout robot design.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.662-663
• /
• 2015

Despite the improvement of productivity and cost, the operating of such equipments yet has been recognized as a 3D business which is a low wage and poor working environment business field. Accordingly, the number of such operators has been decreasing by time. Especially, construction equipment demands higher controlling skills and occasionally involved in critical accidents. Therefore, this study aims to suggest a conceptual design for an construction equipment Around View Monitoring system that visually assists the operator for more efficient operating. It is expected that the application of such technology for a construction equipment highly improves the productivity and work quality, moreover, prevents disastrous accidents that occur to labors.