• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.325-334
• /
• 2018

Lactose is a reducing disaccharide consisting of two different monosaccharides such as galactose and glucose. The hydrogenation of lactose to lactitol is a formidable challenge because it is a complex process and several side products are formed. In this work, we synthesized Ru-Ni bimetallic nanohybrids as efficient catalysts for selective lactose hydrogenation to give selective lactitol. Ru-Ni bimetallic nanohybrids with $Ru-NiO_x$ (x = 1, 5, and 10 wt%) are prepared by impregnating Ru and Ni salts precursors with $TiO_2$ used as support material. Ru-Ni bimetallic nanohybrids (represented as $5Ru-5NiO/TiO_2$) catalyst is found to exhibit the remarkably high selectivity of lactitol (99.4%) and turnover frequency i.e. ($374h^{-1}$). In contrast, monometallic $Ru/TiO_2$ catalyst shows poor performance with ($TOF=251h^{-1}$). The detailed characterizations confirmed a strong interaction between Ru and NiO species, demonstrating a synergistic effect on the improvement on lactitol selectivity. The impregnation-reduction method for the preparation of bimetallic $Ru-NiO/TiO_2$ catalyst promoted Ru nanoparticles dispersed on NiO and intensified the interaction between Ru and NiO species. $Ru-NiO/TiO_2$ efficiently catalyzed the hydrogenation of lactose to lactitol with high yield/selectivity at almost complete conversion of lactose at $120^{\circ}C$ and 55 bar of hydrogen ($H_2$) pressure. Moreover, $Ru-NiO/TiO_2$ catalyst could also be easily recovered and reused up to four runs without notable change in original activity.

• 청정기술
• /
• 제16권1호
• /
• pp.12-18
• /
• 2010

본 연구의 목적은 산화탈황 공정의 부산물인 dibenzothiophene sulfone의 분해반응용 KF/MgO 촉매를 개발하는 것이다. MgO 지지체에 KF를 담지시켜 KF/MgO 촉매를 제조하였다. KF 담지량 및 소성 효과 등이 촉매 특성에 미치는 영향을 BET표면적, XRF, XRD, 이산화탄소 승온탈착 실험 등을 통해서 분석하였다. Dibenzothiophene sulfone을 biphenyl 과 이산화황으로 분해하는 반응에서의 촉매 특성을 조사하였다. MgO 촉매에 KF를 담지하면 DBTS 분해반응 활성이 증가하였다. KF/MgO 촉매를 제조하여 373 K에서 건조과정만 거친 촉매의 활성이 고온에서 소성을 거친 촉매의 활성보다 높았으며, 이는 fluoride 이온 ($F^-$)이 염기도를 증가시키는 역할을 하기 때문으로 판단된다. KF를 10 wt% 담지한 촉매가 dibenzothiophene sulfone 분해 반응에서 가장 뛰어난 활성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1664-1666
• /
• 2004

This paper describes the use of Armaid papers and varnishes in electric motors. We compare with boundary element method(BEM) and finite element method(FEM) by calculated electric field strength. Several computer software package to perform such calculations based on electrostatic field and applicable DC are available.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권6호
• /
• pp.72-80
• /
• 2018

본 연구는 기계주입 방식으로 간단히 재충전 할 수 있는 TPS 공법을 사용하여 실제 건설현장에 적용한 후 콘크리트 균열에 미치는 영향을 알아보고자 하였는데, 그 결과를 요약하면 다음과 같다. 먼저, 초음파 속도의 경우 TPS 공법을 사용하였을 시 주사기 공법에 비해 평균 약 36 mm/sec로 초음파가 빠른 속도로 통과하는 것을 알 수 있었고, 주입깊이의 경우 주사기 공법에서는 부분 충전되는 것을 확인하였으나 TPS 공법의 경우 강한 주입 압력으로 모든 배합에서 보수재가 100% 충전되는 우수한 경향을 나타내었다. 또한, 압축강도의 경우는 TPS 공법 사용 시 평균 16.8 % 증가하는 것으로 나타나 구조적으로 우수한 것으로 나타났다. 이상을 종합하면 주사기 공법에 비해 TPS 공법을 사용하였을 시 균열부위에 주입재가 밀실하게 충전되어 강도 증진으로 인한 품질 향상 및 확인창 설치로 인한 균열보수제의 거동이 확인 가능하다. 또한, TPS 공법 시공구간 532 m에 대하여 약 5일의 공사 기간이 단축됨에 따라 시공성이 우수하여 콘크리트 구조물에 균열 보수공법으로 사용성이 확대될 것으로 기대된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.61-64
• /
• 2001

This study relates to a method for manufacturing a solid electrolytic capacitor using a functional polymer composition. The method comprises immersing the rolled aluminum electrolytic capacitor device in polyaniline solution with high electric conductivity to impregnate the device with polyaniline, drying the impregnated device in a drying oven which is maintained at constant temperature to fully remove the solvent, inserting the dried device to a capacitor aluminum can and then sealing with epoxy resin, to manufacture a solid electrolytic capacitor using a conducting polymer. As such, the impregnation can be performed well at not only normal temperature and pressure, but also high temperature and reduced pressure. The solid electrolytic capacitor has the advantages of high capacity, low impedance and low ESR, and also, low manufacturing cost, simple processes and high reliability.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.61-64
• /
• 2001

This study relates to a method for manufacturing a solid electrolytic capacitor using a functional polymer composition. The method comprises immersing the rolled aluminum electrolytic capacitor device in polyaniline solution with high electric conductivity to impregnate the device with polyaniline, drying the impregnated device in a drying oven which is maintained at constant temperature to fully remove the solvent, inserting the dried device to a capacitor aluminum can and then sealing with epoxy resin, to manufacture a solid electrolytic capacitor using a conducting polymer. As such, the impregnation can be performed well at not only normal temperature and pressure, but also high temperature and reduced pressure. The solid electrolytic capacitor has the advantages of high capacity, low impedance and low ESR, and also, low manufacturing cost, simple processes and high reliability.

• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.586-599
• /
• 2014

During the last two decades, indoor air quality and volatile organic compounds (VOCs) have been of concern in Korean society due to their nature of potential health impacts. In order to investigate the pollution levels of VOCss in indoor environments, establishment of a solid test method for monitoring the airborne VOCss is essential. In Korea, a method based on adsorbent sampling and GC analysis coupled with thermal desorption was proclaimed as the Korea Standard Method for Indoor Air Quality Test. This study was carried out to examine some inherent problems of the VOCs measurement method. The VOCs method does not describe in detail preparing the standard samples. The standard samples may be prepared by impregnation of either liquid standard solutions or a mixture of standard gases. In this study, we investigated the optimal temperature condition for transferring the liquid standards onto a standard adsorbent tube. As a result, keeping the impregnation temperature at $250^{\circ}C$ will be recommended in regard of the boiling points of multiple target analytes and the thermal stability of the adsorbent. We also demonstrated some problems associated with handling of a syringe used for transferring the standard solutions onto the adsorbent tubes, and a best way to get rid of the syringe problems was suggested. Finally, a number of field works were conducted to evaluate the performance of adsorbent sampling methods. Comparison of different adsorbent tubes, i.e. tube packed with single sorbent (Tenax) and double sorbents (Tenax with Carbotrap), revealed that 30 to 40% differences between the two groups, implying that sampling efficiency is depending on the volatility and the strength of adsorbents. However, duplicate precisions for VOCs sampling with a same type of adsorbent and at same flow rates appeared to be satisfactory to be all within 20%, which is a quality control guideline. Distributed volume precisions were also found to be within a guideline value, 25%, although the precision was in general inferior to the duplicate precision. The Korea indoor VOCs test method should be more refined and improved in many aspects, particularly procedure and instrumentation for preparing the standard samples and specification of quality control assessment.

• 청정기술
• /
• 제24권3호
• /
• pp.198-205
• /
• 2018

본 연구는 $Co-CeO_2$ 촉매의 $N_2O$ 분해 반응에서 촉매의 제조 방법이 활성에 미치는 영향을 고찰하였다. $Co-CeO_2$ 촉매는 공침법(Co-precipitation)과 함침법(Incipient wetness impregnation)으로 제조하였다. 제조된 촉매의 성능을 평가하기 위하여 $N_2O$ 직접 촉매 분해(Direct catalytic $N_2O$ decomposition) 반응을 $250{\sim}375^{\circ}C$에서 실시하였다. 그 결과 공침법으로 제조된 촉매(CoCe-CP)는 $O_2$ 및/또는 $H_2O$의 존재 하에서도 $N_2O$ 분해 반응에서 향상된 성능을 보인 반면에 함침법으로 제조된 촉매(CoCe-IM)는 그렇지 못하였다. 이러한 촉매 활성의 차이를 조사하기 위하여 XRD, BET, TEM, $H_2-TPR$, $O_2-TPD$ 그리고 XPS와 같은 촉매 특성 분석들을 진행하였다. 촉매의 제조 방법에 따라서 입자의 크기 및 표면적이 변화하는 것을 확인하였고 합성 과정이 촉매의 물리적 특성에 영향을 미치는 것을 알 수 있었다. 공침법으로 제조된 촉매의 활성 증가는 $Co^{3+}{\rightarrow}Co^{2+}$의 향상된 환원 특성 및 산소 탈착 속도 향상에 기인한 것으로 여겨진다. 하지만, $N_2O$ 분해와 관련이 있는 촉매의 표면 전하 상태 및 결합에너지는 제조 방법에 따라서 변하지 않는 것을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제53권3호
• /
• pp.372-381
• /
• 2015

본 연구에서는 $Ni/Al_2O_3$ 촉매를 사용한 에틸렌글리콜의 수증기 개질반응에서 제조 방법에 따른 영향을 알아보았다. 촉매들은 건식 함침법, 습식 함침법 그리고 공침법을 사용하여 제조하였다. 공침법을 사용하여 촉매 제조시 침전제를 KOH, $K_2CO_3$, $NH_4OH$를 각각 사용하여 침전제에 따른 영향 또한 알아보았다. 제조한 촉매들은 질소 물리흡착, 유도결합 플라즈마 질량분석법(ICP-AES), X선 회절법(XRD), 수소 승온 환원법(TPR), 수소 화학흡착, 승온 산화법(TPO), 주사전자현미경(SEM), 열분석법(TGA)을 사용하여 촉매의 물리화학적인 특성을 분석하였다. 773 K에서 환원한 촉매의 경우 KOH 혹은 $K_2CO_3$를 침전제로 사용하여 공침법으로 제조한 촉매가 가장 높은 활성을 보였다. 촉매 제조 방법은 Ni의 입자크기, Ni 산화물의 환원도, 반응에서의 활성과 안정성, 반응 중 탄소 침적의 형태 등에 영향을 끼치는 것을 확인할 수 있었다. KOH를 침전제로 사용하여 공침법으로 제조한 촉매의 경우 환원온도를 773~1173 K까지 증가시켰을 때, Ni 입자크기의 증가에도 불구하고 Ni 산화물의 환원도가 증가하므로 반응활성이 증가하는 것으로 나타났다.

• 대한의생명과학회지
• /
• 제13권4호
• /
• pp.361-368
• /
• 2007

Biological samples can be fixed either by chemical method by using chemical solution or physical methods by using heat treatment. The problem in traditional heat fixation is unsatisfactory quality due to uneven heat conduction in specimen and loss of inner cell contents. Chemical fixation method also bears several intrinsic problems like the limit in specimen size, time consumption in fixative impregnation, and loss of low molecular weight cell components. These factors deteriorate the quality of fixed specimen, thus limit the magnification and contrast of tissue pictures. Microwave heat has been reported to be a good alternative to current chemical methods to overcome these problem. In this study, we tried to introduce the microwave energy method to routine fixation work in hospital. We replaced chemical fixative with saline to provide moderate reaction condition, and used frozen section to reduce time for sample preparation. Temperature was measured at each experiment. The fixation of rat kidney tissue with 2.45 GHz electromagnetic wave and saline showed similar result to the control group fixed with traditional chemical method. Human tumor tissue fixed with 2.45 GHz electromagnetic in frozen section was improved in terms of histochemistry of PAS and immunohistochemistry of tumor marker like cytokeratin. Total turnaround time was reduced from $24\sim38$ h to to $2\sim4$ h. In conclusion, the quality of samples prepared by microwave heating method was at least as good as that of traditional method. If the condition for the fixation of different specimens is standardized, this new method could be applied to routine work in hospital, and could save working time as well.