• Geomechanics and Engineering
• /
• 제20권2호
• /
• pp.113-120
• /
• 2020

Rock damage is the main cause of accidents in underground engineering. It is difficult to predict rock damage accurately by using only one parameter. In this study, a rock failure prediction model was established by using stress, energy, and damage. The prediction level was divided into three levels according to the ratio of the damage threshold stress to the peak stress. A classification predicting model was established, including the stress, energy, damage and AE impact rate using Bayesian method. Results show that the model is good practicability and effectiveness in predicting the degree of rock failure. On the basis of this, a multi-parameter classification predicting deterioration model of rock failure was established. The results provide a new idea for classifying and predicting rockburst.

• Composites Research
• /
• 제26권1호
• /
• pp.21-28
• /
• 2013

본 논문에서는 유효 면적의 제한이 있는 복합재 적층판의 탄도한계속도를 예측하였다. 탄도한계속도를 예측하기 위해 정적압입 관통실험과 고속충격 실험 그리고 준실험식을 이용하였다. 정적압입 관통실험을 통해 하중-변위 데이터를 취득하고 이를 이용해서 관통에너지를 측정하였다. 고속충격 실험을 통해 실제 관통 속도 및 관통 에너지를 측정하였다. 정적압입 관통실험과 고속충격 실험을 통해 구한 에너지를 이용해 준실험식을 만들고, 준실험식과 고속충돌 실험결과와 비교해 보았다. 위 방법을 이용해 탄도한계속도를 예측하였고 정적압입 관통 실험과 준실험식에 의한 탄도한계속도 예측의 타당성을 확인하였다.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.474-481
• /
• 2002

Fouling deposits due to surface-coated particles have been calculated using CFD techniques. The sticking probabilities of the surface-coated particles are also evaluated on the basis of an energy balance. The sticking probabilities of the deposit surface are also included in the prediction of the deposition occurring through the multiple impaction of particles with the deposit surface. The sticking probability of an impacting particle is expressed in terms of such parameters as particle viscosity, surface tension, impact velocity, impact angle and the thickness of the sticky layer on a particle. Particulate behavior around a tube in cross flow was studied using the Lagrangian approach. Three important parameters i.e. impact velocity, impact angle, and particulate concentration, were used in the prediction of deposition rate. The computational predictions were found to be in good agreement with the experimental data.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권4호
• /
• pp.234-240
• /
• 2010

연안개발로 인해 발생하는 해양환경 변화를 정확히 예측하여 해양환경을 효율적으로 관리하기 위해서는 정확한 조위 및 조류 분포에 관한 자료의 확보가 필수적이다. 그러나 현재 대부분의 환경영향평가에서는 조석 수치모의에서 제한된 조석분조 만을 사용하여 조위와 조류분포를 예측하여 많은 분조의 합성에 의해 발생되는 실제 조석현상을 정확하게 계산하지 못하고 있으며, 이로 인해 환경영향평가에 오류가 발생하고 있다. 본 연구에서는 제한된 분조의외해 개방경계에서 조화상수를 가지고도 연안에서 관측된 조위자료를 활용하여 실시간으로 정확하게 조위 및 조류 분포를 예측할 수 있는 방법을 제안하였다. 4개 분조에 의한 조위와 38개 분조에 의한 조차의 비 그리고 모의조차와 관측조차의 비를 가지고 보정한 조위 예측결과는 관측조위와 잘 일치하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권1호
• /
• pp.23-29
• /
• 2015

Energy constraints of wireless sensor networks are an important challenge. Data Transmission requires energy. Distance between origin and destination has an important role in energy consumption. In addition, the location of base station has a large impact on energy consumption and a specific method not proposed for it. In addition, a obtain model for location of base station proposed. Also a model for distributed clustering is presented by cluster heads. Eventually, a combination of discussed ideas is proposed to improve the energy consumption. The proposed ideas have been implemented over the LEACH-C protocol. Evaluation results show that the proposed methods have a better performance in energy consumption and lifetime of the network in comparison with similar methods.

• 풍력에너지저널
• /
• 제14권3호
• /
• pp.69-82
• /
• 2023

Offshore wind farms (OWFs) should be promoted as part of global efforts to respond to climate change, and efforts to preserve biodiversity in terms of climate change adaptation should also be considered. However, the ecological status of marine birds related to OWFs on the Korean Peninsula, such as habitat and reproduction, are not well known. In this study, ecological reasons for the reproductive status of Black-tailed gulls in Korea and representation related to OWFs, the evaluation direction of marine birds related to OWFs was presented. In a review of the techniques for monitoring marine birds, it was confirmed that Korea also needs to provide basic status information on marine birds at the national level. In addition, this study analyzed the reproductive status and related research status of Black-tailed gulls, an important indicator and dominant species on the Korean Peninsula, in relation to marine development projects including OWFs. Furthermore, the direction of environmental impact assessment preparation and impact prediction for various development projects promoted in the ocean, such as OWFs, was considered.

• Computers and Concrete
• /
• 제9권1호
• /
• pp.21-33
• /
• 2012

This paper presents the numerical simulation of the rigid 12.6 mm diameter kinetic energy ogive-nosed projectile impact on plain and fiber reinforced concrete (FRC) targets with compressive strengths from 45 to 235 MPa, using a three-dimensional finite element code LS-DYNA. A combined dynamic constitutive model, describing the compressive and tensile damage of concrete, is implemented. A modified Johnson_Holmquist_Cook (MJHC) constitutive relationship and damage model are incorporated to simulate the concrete behavior under compression. A tensile damage model is added to the MJHC model to analyze the dynamic fracture behavior of concrete in tension, due to blast loading. As a consequence, the impact damage in targets made of plain and fiber reinforced concrete with same matrix material under same impact velocities (650 m/s) are obtained. Moreover, the damage distribution of concrete after penetration is procured to compare with the experimental results. Numerical simulations provide a reasonable prediction on concrete damage in both compression and tension.

• Wind and Structures
• /
• 제13권2호
• /
• pp.95-108
• /
• 2010

This review paper discusses research from the last few years relating to windborne debris risk models and the essential elements of engineering damage prediction models. Generic types of windborne debris are discussed. The results of studies of debris trajectories that are relevant to damage models are described - in particular the horizontal component of debris velocity as a function of distance travelled. The merits of impact momentum versus impact kinetic energy as a relevant parameter for predicting damage are considered, and how published data from generic cannon Impact tests can be used in risk models. The quantitative variation of debris impact damage with wind speed is also discussed. Finally the main elements of previously-proposed debris damage models are described.

• 한국태양에너지학회 논문집
• /
• 제24권4호
• /
• pp.35-43
• /
• 2004

Illuminance and luminous levels in a small office space due to daylight were calculated to analyze the impact of daylight on contrast and lighting energy savings. Computer simulations were performed for four blind conditions under a clear sky condition. The blind conditions significantly impacted the illuminance an4 luminance level. Visual performance scores were calculated according to the transfer function that uses absolute contrast between target and background surface. The blind condition that had 45 tilted angle toward ground provided good contrast and performance scores. Using a control algorithm of an automated daylight dimming control system lighting energy sayings were predicted. For all blind conditions minimum lighting energy was consumed.

• Steel and Composite Structures
• /
• 제44권2호
• /
• pp.225-240
• /
• 2022

Local responses of steel plate-concrete composite (SC) walls under impact loads are typically evaluated using design equations available in the AISC N690s1-15. These equations enable design of impact-resistant SC walls, but some essential parts such as the effects of wall size and shear reinforcement ratio have not been addressed. Also, since they were developed for design basis events, improved equations are required for accurate prediction of the impact behaviors of SC walls for beyond design basis impact evaluation. This paper presents a numerical study to construct a robust numerical model of SC walls subjected to impact loads to reasonably predict the SC-wall impact behavior, to evaluate the findings observed from the impact tests including the effects of the key design parameters, and to assess the actual responses of full-scale SC walls. The numerical calculations are validated using intermediate-scale impact tests performed previously. The influences of the fracture energy of concrete and the conservative aspects of the current design equations are discussed carefully. Recommendations are made for design practice.